This article investigates the impacts of different current limiting strategies on the transient stability of the virtual synchronous generator (VSG). The power–angle curve of the VSG under different operating conditions is theoretically characterized in detail and experimentally verified through tests conducted on hardware-implemented lab-scale VSGs. It is shown that the reference current saturation approaches prioritizing the current vector angle, the d -axis current, and the q -axis current reshape the VSG power–angle curve in different ways. The resulting impacts on the VSG transient stability are comprehensively investigated through time-domain simulation of a battery energy storage system that is operated as a VSG and connected to a medium-voltage Canadian distribution feeder. The transient stability margin of the VSG is evaluated by determining the critical clearing time (CCT) of various fault scenarios. The studies conducted in the PSCAD/EMTDC software environment utilizing a detailed switching model of the VSG indicate that 1) the current limit of the VSG significantly impacts its power output during and after faults; and 2) the q -axis priority current limiting strategy provides a larger transient stability margin (CCT) as compared with the current vector angle and d -axis current priority approaches.
12 July 2019 in IEEE Transactions on Industry Applications
A comprehensive knowledge of the available grounding strategies and their effects is essential for design, operation, and protection of the dc microgrid. This paper investigates and compares different dc microgrid grounding strategies that involve the choice of grounding configurations and grounding devices. The impacts of different grounding strategies on line-to-ground (LG) fault detection and protection, transient LG fault current magnitude, leakage current level, common mode voltage, personnel/equipment safety, system reliability, service continuity, and insulation requirements are thoroughly investigated. LG fault response of a low-voltage dc microgrid with different grounding devices is studied by detailed simulation of a realistic study system modeled in the PSCAD software. The study results indicate that: 1) the ungrounded, bipolar solidly grounded, unipolar parallel resistance grounded, and bipolar resistance grounded dc microgrids enable LG fault ride through, due to the low fault current; 2) the unipolar solidly grounded, bipolar solidly grounded, diode-grounded, and thyristor-grounded dc microgrids experience significantly large transient discharge currents under LG faults; and 3) the unipolar solidly grounded, diode-grounded, thyristor-grounded, and unipolar low-resistance-grounded dc microgrids provide considerable steady-state LG fault current which necessitates fast detection and clearance of faults.
As technology advances, the use of Machine Learning (ML) in cybersecurity is becoming increasingly crucial to tackle the growing complexity of cyber threats. While traditional ML models can enhance cybersecurity, their high energy and resource demands limit their applications, leading to the emergence of Tiny Machine Learning (TinyML) as a more suitable solution for resource-constrained environments. TinyML is widely applied in areas such as smart homes, healthcare, and industrial automation. TinyML focuses on optimizing ML algorithms for small, low-power devices, enabling intelligent data processing directly on edge devices. This paper provides a comprehensive review of common challenges of TinyML techniques, such as power consumption, limited memory, and computational constraints; it also explores potential solutions to these challenges, such as energy harvesting, computational optimization techniques, and transfer learning for privacy preservation. On the other hand, this paper discusses TinyML’s applications in advancing cybersecurity for Electric Vehicle Charging Infrastructures (EVCIs) as a representative use case. It presents an experimental case study that enhances cybersecurity in EVCI using TinyML, evaluated against traditional ML in terms of reduced delay and memory usage, with a slight trade-off in accuracy. Additionally, the study includes a practical setup using the ESP32 microcontroller in the PlatformIO environment, which provides a hands-on assessment of TinyML’s application in cybersecurity for EVCI.
High-impedance faults (HIF) are difficult to detect because of their low current amplitude and highly diverse characteristics. In recent years, machine learning (ML) has been gaining popularity in HIF detection because ML techniques learn patterns from data and successfully detect HIFs. However, as these methods are based on supervised learning, they fail to reliably detect any scenario, fault or non-fault, not present in the training data. Consequently, this paper takes advantage of unsupervised learning and proposes a convolutional autoencoder framework for HIF detection (CAE-HIFD). Contrary to the conventional autoencoders that learn from normal behavior, the convolutional autoencoder (CAE) in CAE-HIFD learns only from the HIF signals eliminating the need for presence of diverse non-HIF scenarios in the CAE training. CAE distinguishes HIFs from non-HIF operating conditions by employing cross-correlation. To discriminate HIFs from transient disturbances such as capacitor or load switching, CAE-HIFD uses kurtosis, a statistical measure of the probability distribution shape. The performance evaluation studies conducted using the IEEE 13-node test feeder indicate that the CAE-HIFD reliably detects HIFs, outperforms the state-of-the-art HIF detection techniques, and is robust against noise.
7 August 2018 in IEEE Transactions on Industry Applications
Grounding strategy of an AC microgrid affects its line-to-ground fault response, personnel/equipment safety, service continuity, insulation requirements, and protection criteria. Therefore, a comprehensive knowledge of the available grounding strategies and their effects is essential for design and operation of the microgrid components and especially its protection. In this paper, characteristics of different AC distribution system grounding devices and grounding configurations are investigated. Subsequently, AC microgrid grounding requirements and issues are identified based on the unique characteristics and constraints of microgrids. The results of the aforementioned investigations are used to identify the best grounding strategies, i.e., grounding configurations, transformer connection types, and grounding devices, for the AC microgrid. The study results indicate that the four-wire multi-grounded configuration is the most suitable choice for the majority of microgrids, especially in North America. The $Yg/\Delta$ and Yg/Yg transformers are identified as the most appropriate choices for DER interface to the four-wire multi-grounded microgrid. Besides, low-reactance and low-resistance grounding devices are recommended for the DER interface transformers.
21 April 2022 in Neural Computing and Applications