In vector-controlled Permanent Magnet Synchronous Motors (PMSMs), measuring the motor flux angle, particularly the rotor position, is essential. If a pulse error occurs during motor control using an encoder, it becomes impossible to accurately estimate the rotor position, leading to incorrect position angle information being used in the coordinate transformation. This mismatch causes discrepancies between the commanded three-phase stator current and the actual current applied to the motor. As a result, the motor and inverter output and efficiency decrease, and the control performance deteriorates. Therefore, research is necessary to compensate for such errors. This paper proposes an algorithm that detects pulse errors occurring in incremental encoders and automatically switches to the Hall sensor control mode to compensate for the encoder pulse errors. The proposed algorithm, based on Hall sensors, has the advantage of not significantly affecting control delays, which could be problematic in high-speed operating ranges; thus, effective control is maintained even in such situations.

This study presents the characteristics and performance of a motor at the operating point based on pulse-width modulation (PWM). PWM is used in modulating the output voltage of a three-phase inverter. The PWM technique has advantages and disadvantages depending on the system size and operating range. For example, some discontinuous pulse-width modulation (DPWM) techniques are advantageous in low-cost systems because they can reduce the number of switches. Some PWM techniques are complicated for software construction and require a lot of computation. In this paper, PWM techniques were constructed by using the offset voltage injection method. Therefore, the construction of the PWM technique is simplified by the method. In an experimental setup, an interior permanent-magnet synchronous motor (IPMSM) and a three-phase inverter were implemented to test motor control performance depending on the PWM technique. In addition, the current control characteristics and inverter efficiency were analyzed and compared depending on the speed and load of the motor. According to the results of this paper, it is possible to compare the motor and inverter control characteristics using various types of PWM rapidly. Additionally, it will help to select an appropriate PWM technique for a specific system.

This paper presents the design, modeling, and control of a hybrid multi-degree-of-freedom motor (HMDOF motor) that can be applied to unmanned aerial vehicles, such as drones. The HMDOF motor has a rotating motor and tilting motors separately and enables multi-DOF movement by driving each motor. In addition, owing to its structural characteristics, it is designed to allow a 3- or 6-DOF movement in only one motor. In this study, the control performance of an HMDOF motor was verified using simulated and experimental results. The position control performance for the rotation speed of the rotating motor was verified, and the control performance of the motor under the speed of the rotating motor and disturbance on tilting motors were analyzed.