Polyaniline (PAni) is a conductive polymer with colorimetric properties, which can be combined with biopolymers to form novel composite materials. These materials can be used as a colorimetric sensor/indicator in the identification of different kinds of analytes. The present study aimed to develop a film of PAni and gum Arabic (GA) by electrochemical method to evaluate its potential use in a colorimetric sensor for ammonia vapor (NH3). The composite PAni/GA was prepared by electrochemical polymerization on a gold surface using the cyclic voltammetry technique. The stability of the films was evaluated in acid (HCl 0.1 mol L-1) after 25 imaging cycles. Strongly acidified gum arabic solution (pH 0.0) and a sweep speed of 10 mV s-1 caused higher current density in the film formation. The morphology of the films was observed by SEM and the presence of cracks in its structure can favor the entry of gases. The response of the composite in the presence of NH3 was measured using a colorimeter. The PAni/GA composite is a promising and rapid tool for use in colorimetric sensors in the detection of NH3.
1 June 2023 in Journal of the Electrochemical Society
The electrosynthesis of polyaniline (PAni) and cashew gum (CG) composite was successfully performed by electrochemical methods (potential scanning and constant potential) in terms of pH, aniline (Ani), and polyelectrolyte concentrations. Study aim was to investigate the performance of a polyaniline-based ammonia sensor under different concentrations of ammonium gas, evidencing a color change from green to blue as in the presence of gas in a sensitive and reversible process. Films grown by cyclic voltammetry and chronoamperometry showed a cauliflower-like morphology, and a visual analysis detected a limit of 0.015 and 0.010 mol l−1, respectively. The sensor demonstrated a fast response time of 20 s, a low detection limit, with a short regeneration time of less than 1 min at room temperature. This polyaniline-based sensor is shown as a portable, sensitive, dimensionally flexible, and cost-effective alternative for food packaging and other devices. The findings of this study contribute to the development of advanced ammonia detection technology.