cheng wan

Prof. cheng wan

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 April 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
YYYong Yu
Yong Yu
MYMingjian Yang
Mingjian Yang
CWcheng wan
cheng wan
LLLang Lin
Lang Lin
Limestone calcined clay cement (LC3) and recycled aggregates (RAs) are important innovations in civil engineering, offering solutions to the industry’s energy and carbon challenges. However, limited research on their combined use has hindered widespread application. This study systematically evaluates LC3-based concrete with both coarse and fine RAs, using material testing, cost analysis and carbon footprint assessments to examine the effects of water-to-binder ratio, metakaolin-limestone powder synergy, RA content and particle quality on workability, compressive strength, elastic modulus, splitting-tensile strength, unit cost and environmental impact, while establishing clear quantitative relationships. Key findings include: (i) Using up to 50% metakaolin-limestone powder by mass, 30% coarse RA and 20% recycled sand by volume results in minimal reductions in 28-day strength and elastic modulus. However, exceeding 70%, 50% and 40%, respectively, leads to significant mechanical deterioration. (ii) LC3 concrete has 4-15% lower strength than Portland cement concrete at 14 days due to slower pozzolanic reactions, but strength levels equalize by 28 days. Similarly, recycled aggregate concrete shows lower early-age strength, with extended curing further highlighting performance differences, likely due to the residual mortar on recycled particles. (iii) Lifecycle analysis confirms that replacing 50% of the binder with metakaolin-limestone powder reduces carbon emissions by 29.9% and costs by 12.4% for strength-equivalent concrete. In contrast, RAs offer only modest sustainability benefits, with 20% recycled sand and 30% coarse RA increasing emissions by 5.4% and 2.8%, respectively, while keeping costs stable. (iv) The quality of RA particles plays a key role in their sustainable application. Additionally, transportation distance significantly affects the circular benefits of RA use but has a limited impact on the sustainability of metakaolin-limestone powder.

11 December 2024 in Coatings
Verified
Journal Article
Open access
PDF file
CWcheng wan
cheng wan
SZShuxin Zheng
Shuxin Zheng
MZMengjun Zhong
Mengjun Zhong
JYJiankun Yang
Jiankun Yang
YYYong Yu
Yong Yu
Shuai FangShuai Fang
Shuai Fang
OGFC (open-graded friction course) steel slag ultra-thin wearing courses are a drainage-type layer used in preventive maintenance and have been successfully applied in road construction in China. However, research on the use of steel slag in ultra-thin wearing courses has mainly focused on macroscopic volumetric indicators and performance, often overlooking the impact of internal mesoscopic void characteristics. This study utilized X-ray CT to scan OGFC ultra-thin wearing course steel slag asphalt mixtures with varying void ratios. A custom digital image processing program was developed to comprehensively and quantitatively characterize the mesoscopic void features of the mixtures from multiple perspectives, analyzing their influence on macroscopic performance. The results show that the surface void ratio and void number exhibited opposite trends with respect to specimen height. Compared to conventional asphalt mixtures, the OGFC steel slag mixtures had a higher average surface void number; the maximum difference between the maximum and minimum surface voids rate reached up to 14.2%. As the equivalent void radius and fractal dimension increased, both the stability and dynamic stability of the mixtures decreased, and the maximum reduction in Marshall stability reached 32.4%. Previous macroscopic-scale studies have struggled to identify these internal mesoscopic void characteristics, and this research provides a deeper understanding of the mesoscopic void structure in OGFC ultra-thin wearing course steel slag asphalt mixtures.

10 July 2023 in Buildings
Verified
Journal Article
Open access
PDF file
CWcheng wan
cheng wan
QYQiang Yi
Qiang Yi
XZXiaoning Zhang
Xiaoning Zhang
This work presents a new approach to investigating water conduction properties in real three-dimensional (3D) voids of asphalt mixtures. Three different molding methods were employed for the same grade of asphalt mixture, and the three asphalt mixture specimens were scanned using X-ray Computerized Tomography (CT) to identify the real 3D void structure distribution inside the mixture. The real 3D behavior of void moisture conduction inside the mixture was simulated using the discrete lattice Boltzmann method and the BGK collision model. Three different molding methods were used to study the behavior of mesoscopic seepage inside the specimen. The results show that water conduction varies substantially in real 3D voids inside diverse molded objects. Regardless of flow and flow velocity, the Superpave Gyratory Compactor (SGC) method is extraordinarily close to the conduction qualities of the actual field core material. It shows that the Marshall molding method is inconsistent with the actual pavement molding method, and the SGC method can not only ensure that the reasonable void ratio is conducive to the thermal expansion and cold shrinkage space of the asphalt mixture but also prevents rainwater from entering the asphalt mixture. This work provides a new perspective for the study of water damage resistance and medium transmission characteristics of asphalt mixtures.

8 November 2024 in Coatings
Verified
Journal Article
Open access
PDF file
CWcheng wan
cheng wan
QYQiang Yi
Qiang Yi
JYJiankun Yang
Jiankun Yang
YYYong Yu
Yong Yu
Shuai FangShuai Fang
Shuai Fang
As a novel pavement wear layer material, the micromechanical mechanisms of High-toughness Ultra-thin Friction Course (HUFC) have not been fully elucidated. This paper presents a new method for the three-dimensional micromechanical simulation of high-toughness asphalt mixtures based on a viscoelastic parameter calibration model. X-ray Computerized Tomography (CT) was employed to scan samples of high-toughness asphalt mixtures to obtain detailed information on the internal structure (aggregate, fine aggregate matrix FAM and voids), and a three-dimensional micromechanical model was constructed based on the real-scale distribution of these components. Aggregates in the high-toughness asphalt mixture were modeled as elastic bodies, while FAM was treated as a viscoelastic material characterized by the Burgers model. Using the Boltzmann linear superposition principle and Laplace transform theory, the viscoelastic properties of FAM were converted into Prony parameters recognizable by finite element software, and the viscoelastic parameters were calibrated. Micromechanical simulations were conducted for three different gradings of high-toughness asphalt mixtures, and the results show that the predicted deformation closely matched the measured deformation. This method accurately reflects the deformation characteristics of different gradings of high-toughness asphalt mixtures, overcoming the limitations of traditional numerical simulations based on homogeneous material models. It represents an advancement and refinement of micromechanical simulation methods for high-toughness asphalt mixtures.

6 February 2018
Verified
Conference Paper
Closed access
CWcheng wan
cheng wan
QYQiang Yi
Qiang Yi
BYBin Yang
Bin Yang
KXKe Xu
Ke Xu
YMYongjun Meng
Yongjun Meng
HRHongliu Rong
Hongliu Rong
In order to compare the difference of loading mode between the RLWT (rotary loaded wheel tester) and the APA, the specimens were compacted using the same gradation under different compaction times, the rutting tests were conducted using RLWT and the APA. Moreover, the images of specimens profile were processed with digital image technology, and the equivalent diameters of coarse aggregates were extracted and analyzed. The results show that the angle between the long axis of coarse aggregate and X-axis increases gradually for RLWT, oppositely, the angle between the long axis of coarse aggregate and X-axis decreases gradually for APA, which is agree with the movement direction of aggregates in the open traffic pavement. The study indicates that it exist great difference of loading mode between the RLWT and the APA, the research for the extensive promotion of RLWT should be further conducted.

16 September 2024 in Mechanics of Advanced Materials and Structures
Verified
Journal Article
Closed access
YZYinghao Zhao
Yinghao Zhao
CWcheng wan
cheng wan
TATamim Alkhalifah
Tamim Alkhalifah
SJSlaheddine Jarboui
Slaheddine Jarboui