Room temperature visible and near-infrared photoluminescence from black silicon has been observed. The black silicon is manufactured by shining femtosecond laser pulses on silicon wafers in air, which were later annealed in vacuum. The photoluminescence is quenched above 120 K due to thermalization and competing nonradiative recombination of the carriers. The photoluminescence intensity at 10K depends sublinearly on the excitation laser intensity confirming band tail recombination at the defect sites.
Diamond’s nitrogen-vacancy (NV) centers show great promise in sensing applications and quantum computing due to their long electron spin coherence time and because they can be found, manipulated, and read out optically. An important step forward for diamond photonics would be connecting multiple diamond NVs together using optical waveguides. However, the inertness of diamond is a significant hurdle for the fabrication of integrated optics similar to those that revolutionized silicon photonics. In this work, we show the fabrication of optical waveguides in diamond, enabled by focused femtosecond high repetition rate laser pulses. By optimizing the geometry of the waveguide, we obtain single mode waveguides from the visible to the infrared. Additionally, we show the laser writing of individual NV centers within the bulk of diamond. We use µ-Raman spectroscopy to gain better insight on the stress and the refractive index profile of the optical waveguides. Using optically detected magnetic resonance and confocal photoluminescence characterization, high quality NV properties are observed in waveguides formed in various grades of diamond, making them promising for applications such as magnetometry, quantum information systems, and evanescent field sensors.
In this letter, a silicon microsphere coupled to a silica optical fiber half coupler has been characterized for electrooptical modulation in the L-band at 1.55 mum. Electrooptical modulation of the transmitted and the 90deg elastic scattered signals for both the TE and the TM polarizations of the microsphere resonances has been observed.
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
We report on the coupling of whispering gallery modes in a 500-μm-radius silicon microsphere to a femtosecond-laser-inscribed glass optical waveguide. The shallow glass waveguide with a large mode field diameter in the near-infrared is written at a depth of 25 μm below the glass surface, resulting in a high excitation impact parameter of 525 μm for the microsphere. The excited whispering gallery modes of the silicon microsphere have quality factors of approximately in the 90° elastic scattering and 0° transmission. Integration of such spherical silicon microresonators on femtosecond-laser-inscribed glass waveguides is promising for photonic communication, computation, and sensing applications.
A microcavity-based deoxyribonucleic acid (DNA) optical biosensor is demonstrated for the first time using synthetic sapphire for the optical cavity. Transmitted and elastic scattering intensity at 1510 nm are analyzed from a sapphire microsphere (radius 500 μm, refractive index 1.77) on an optical fiber half coupler. The 0.43 nm angular mode spacing of the resonances correlates well with the optical size of the sapphire sphere. Probe DNA consisting of a 36-mer fragment was covalently immobilized on a sapphire microsphere and hybridized with a 29-mer target DNA. Whispering gallery modes (WGMs) were monitored before the sapphire was functionalized with DNA and after it was functionalized with single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA). The shift in WGMs from the surface modification with DNA was measured and correlated well with the estimated thickness of the add-on DNA layer. It is shown that ssDNA is more uniformly oriented on the sapphire surface than dsDNA. In addition, it is shown that functionalization of the sapphire spherical surface with DNA does not affect the quality factor (Q≈104) of the sapphire microspheres. The use of sapphire is especially interesting because this material is chemically resilient, biocompatible, and widely used for medical implants.