Computer aided design and manufacturing (CAD/CAM) technology today is the standard in manufacturing industry. The application of the CAD/CAM technology, together with the emerging 3D medical images based virtual surgical planning (VSP) technology, to craniomaxillofacial reconstruction has been gaining increasing attention to reconstructive surgeons. This article illustrates the components, system and clinical management of the VSP and CAD/CAM technology including: data acquisition, virtual surgical and treatment planning, individual implant design and fabrication, and outcome assessment. It focuses primarily on the technical aspects of the VSP and CAD/CAM system to improve the predictability of the planning and outcome.
1 November 2008 in Journal of Craniofacial Surgery
Because the pharynx and the dentofacial structures have close relationship, a mutual interaction can be expected to occur between them. The literature presents skeletal malocclusion as etiology for airway morphology changes and/or vice versa. The present three-dimensional cephalometric study from computed tomography scans was carried out to investigate upper airway space in normal nasal breathing patients presenting skeletal pattern of classes II and III. In addition, the statistical analysis was done according to gender criterion. The results revealed that the majority of the airway measurements have not been affected by type of malocclusion. The three-dimensional technology used in this study also allowed the volume and surface area calculations, and no statistical significance was found. The retroglossal width and posterior nasal cavity height mean were larger in males than females in the class II group, but volume and cross-section area were not statistically significant. However, in class III group, although the differences in linear and angular measures means were not significant, the retropalatal volume and retroglossal volume and cross-section area were larger in males. The authors highlight that the evaluation of upper airway space should be an integral part of diagnosis and treatment planning to achieve functional balance and stability of the results.
Objective: To evaluate various types of stress in cortical bone around miniscrew implants using finite element analysis. Materials and Methods: Twenty-six three-dimensional assemblies of miniscrew models placed in alveolar bone blocks were constructed using Abaqus (Dassault Systèmes Simulia Corp, Providence, RI), a commercial finite element analysis software package. The model variables included implant design factors and bone-related factors. All miniscrew implants were loaded in the mesial direction with a linear force equal to 2 N. Peak von Mises and principal stress values in cortical bone were compared between the different models for each factor. Results: The results demonstrated that some factors affected the stresses in bone (implant diameter, implant head length, thread size, and elastic modulus of cancellous bone), while other factors did not (thread shape, thread pitch, and cortical bone thickness). Conclusions: Miniscrew implant diameter, head length, and thread size as well as the elastic modulus of cancellous bone affect the stresses in cortical bone layer surrounding the miniscrew implant and may therefore affect its stability.
Background: Autologous bone grafts remain the gold standard for craniofacial reconstruction despite limitations of donor-site availability and morbidity. A myriad of commercial bone substitutes and allografts are available, yet no product has gained widespread use because of inferior clinical outcomes. The ideal bone substitute is both osteoconductive and osteoinductive. Craniofacial reconstruction often involves irregular three-dimensional defects, which may benefit from malleable or customizable substrates. “Hyperelastic Bone” is a three-dimensionally printed synthetic scaffold, composed of 90% by weight hydroxyapatite and 10% by weight poly(lactic-co-glycolic acid), with inherent bioactivity and porosity to allow for tissue integration. This study examines the capacity of Hyperelastic Bone for bone regeneration in a critical-size calvarial defect. Methods: Eight-millimeter calvarial defects in adult male Sprague-Dawley rats were treated with three-dimensionally printed Hyperelastic Bone, three-dimensionally printed Fluffy–poly(lactic-co-glycolic acid) without hydroxyapatite, autologous bone (positive control), or left untreated (negative control). Animals were euthanized at 8 or 12 weeks postoperatively and specimens were analyzed for new bone formation by cone beam computed tomography, micro–computed tomography, and histology. Results: The mineralized bone volume–to–total tissue volume fractions for the Hyperelastic Bone cohort at 8 and 12 weeks were 74.2 percent and 64.5 percent of positive control bone volume/total tissue, respectively (p = 0.04). Fluffy–poly(lactic-co-glycolic acid) demonstrated little bone formation, similar to the negative control. Histologic analysis of Hyperelastic Bone scaffolds revealed fibrous tissue at 8 weeks, and new bone formation surrounding the scaffold struts by 12 weeks. Conclusion: Findings from our study suggest that Hyperelastic Bone grafts are effective for bone regeneration, with significant potential for clinical translation.
Virtual reality (VR) and augmented reality (AR) have evolved since their introduction to medicine in the 1990s. More powerful software, the miniaturization of hardware, and greater accessibility and affordability enabled novel applications of such virtual tools in surgical practice. This scoping review aims to conduct a comprehensive analysis of the literature by including all articles between 2018 and 2021 pertaining to VR and AR and their use by plastic and craniofacial surgeons in a clinician-as-user, patient-specific manner. From the initial 1637 articles, 10 were eligible for final review. These discussed a variety of clinical applications: perforator flaps reconstruction, mastectomy reconstruction, lymphovenous anastomosis, metopic craniosynostosis, dermal filler injection, auricular reconstruction, facial vascularized composite allotransplantation, and facial artery mapping. More than half (60%) involved VR/AR use intraoperatively with the remainder (40%) examining preoperative use. The hardware used predominantly comprised HoloLens (40%) and smartphones (40%). In total, 9/10 Studies utilized an AR platform. This review found consensus that VR/AR in plastic and craniomaxillofacial surgery has been used to enhance surgeons’ knowledge of patient-specific anatomy and potentially facilitated decreased intraoperative time via preoperative planning. However, further outcome-focused research is required to better establish the usability of this technology in everyday practice.