Francesco Bertocci

Dr. Francesco Bertocci

Esaote spa
orcid

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 November 2019 in Sensors
Verified
Journal Article
Open access
PDF file
FBFrancesco Bertocci
Francesco Bertocci
AGAndrea Grandoni
Andrea Grandoni
TDTatjana Djuric-Rissner
Tatjana Djuric-Rissner
The main aim of this paper is to provide the feasibility of non-destructive testing (NDT) method, such as scanning acoustic microscopy (SAM), for damage detection in ultrasound (US) probes for medical imaging during the manufacturing process. In a highly competitive and demanding electronics and biomedical market, reliable non-destructive methods for quality control and failure analysis of electronic components within multi-layered structures are strongly required. Any robust non-destructive method should be capable of dealing with the complexity of miniaturized assemblies, such as the acoustic stack of ultrasonic transducers. In this work, the application of SAM in an industrial scenario was studied for 24 samples of a phased array probe, in order to investigate potential internal integrity, to detect damages, and to assess the compliance of high-demanding quality requirements. Delamination, non-homogeneous layers with micron-thickness, and entrapped air bubbles (blisters) in the bulk of US probe acoustic stacks were detected and studied. Analysis of 2D images and defects visualization by means of ultrasound-based NDT method were compared with electroacoustic characterization (also following as pulse-echo test) of the US probe through an ad-hoc measurement system. SAM becomes very useful for defect detection in multilayered structures with a thickness of some microns by assuring low time-consuming (a limit for other NDT techniques) and quantitative analyses based on measurements. The study provides a tangible contribution and identifies an advantage for manufacturers of ultrasound probes that are oriented toward continuous improvement devoted to the process capability, product quality, and in-process inspection.

1 December 2015 in Sensors and Actuators B: Chemical
Verified
Journal Article
Closed access
TATommaso Addabbo
Tommaso Addabbo
FBFrancesco Bertocci
Francesco Bertocci
Ada FortAda Fort
Ada Fort
MGMichele Gregorkiewitz
Michele Gregorkiewitz
MMMarco Mugnaini
Marco Mugnaini
VVValerio Vignoli
Valerio Vignoli

1 May 2013
Verified
Conference Paper
Closed access
TATommaso Addabbo
Tommaso Addabbo
FBFrancesco Bertocci
Francesco Bertocci
Ada FortAda Fort
Ada Fort
MMMarco Mugnaini
Marco Mugnaini
VVValerio Vignoli
Valerio Vignoli
SRSantina Rocchi
Santina Rocchi
A measurement system designed for the development of novel conductometric gas sensors and of new gas sensing materials is described. The system allows to simultaneously characterize up to 8 sensors. Prototype sensors can be easily realized thanks to an ad hoc structure based on an alumina substrate equipped with electrodes, a heater and an accurate temperature sensor, on this structure the studied material can be deposited by screen printing, spin coating or dip coating. The system is designed to study the behavior of the sensors by accurately setting the operating conditions in terms of chemical environment composition, gas flow, humidity and temperature. The system is fully programmable and it individually controls the film temperatures or measures them with a resolution lower than 0.1 °C. Both chemical transients and thermal transients can be studied. These features make the system suitable for determining the principal performance indexes of a gas sensing device (e.g., sensitivity, stability, selectivity, response/recovery times, etc.) as functions of various combinations of measurement conditions (e.g., gas concentrations, temperature, humidity, flow). The proposed measurement system will find also useful applications in sensor model validation.

1 June 2017 in Sensors and Actuators B: Chemical
Verified
Journal Article
Closed access
TATommaso Addabbo
Tommaso Addabbo
FBFrancesco Bertocci
Francesco Bertocci
AFAda Fort
Ada Fort
MGMichele Gregorkiewitz
Michele Gregorkiewitz
MMMarco Mugnaini
Marco Mugnaini
VVValerio Vignoli
Valerio Vignoli

1 May 2013
Verified
Conference Paper
Closed access
Ada FortAda Fort
Ada Fort
FBFrancesco Bertocci
Francesco Bertocci
MMMarco Mugnaini
Marco Mugnaini
VVValerio Vignoli
Valerio Vignoli
VGVittorio Gaggii
Vittorio Gaggii
MPMoreno Pieralli
Moreno Pieralli
The concern related to the design of highly reliable communication structures used in applications where safety plays a crucial role has always been under the attention of researchers due to the complexity and importance of the topic. In this paper the authors study the availability of a communication system topology exploitable in rolling stock applications comparing results for two different physical implementations, and discuss the modeling techniques exploited. The optimization of the selected architecture in terms of both availability and safety is provided under qualitative and quantitative aspects. The proposed modeling approach seems to represent a good tradeoff between complexity and adherence of results to realty. The modeling technique solution illustrated in this paper, starting from a given architecture, faces the problem of getting the desired safety degree according to IEC61508 standard through some standard approach exploiting Markov state space. The paper firstly describes the problem outline, then, it analyzes the possible architectures fitting for the solution and then describes the use of the state space techniques to address the desired availability targets to get enough confidence on the desired system robustness to random failures still keeping the requested safety integrity levels.

10 June 2017 in Sensors
Verified
Journal Article
Open access
PDF file
FBFrancesco Bertocci
Francesco Bertocci
Ada FortAda Fort
Ada Fort
VVValerio Vignoli
Valerio Vignoli
Marco MugnainiMarco Mugnaini
Marco Mugnaini
RBRossella Berni
Rossella Berni
Eight different types of nanostructured perovskites based on YCoO 3 with different chemical compositions are prepared as gas sensor materials, and they are studied with two target gases NO 2 and CO. Moreover, a statistical approach is adopted to optimize their performance. The innovative contribution is carried out through a split-plot design planning and modeling, also involving random effects, for studying Metal Oxide Semiconductors (MOX) sensors in a robust design context. The statistical results prove the validity of the proposed approach; in fact, for each material type, the variation of the electrical resistance achieves a satisfactory optimized value conditional to the working temperature and by controlling for the gas concentration variability. Just to mention some results, the sensing material YCo 0 . 9 Pd 0 . 1 O 3 (Mt1) achieved excellent solutions during the optimization procedure. In particular, Mt1 resulted in being useful and feasible for the detection of both gases, with optimal response equal to +10.23% and working temperature at 312 ∘ C for CO (284 ppm, from design) and response equal to −14.17% at 185 ∘ C for NO 2 (16 ppm, from design). Analogously, for NO 2 (16 ppm, from design), the material type YCo 0 . 9 O 2 . 85 + 1 % Pd (Mt8) allows for optimizing the response value at − 15 . 39 % with a working temperature at 181 . 0 ∘ C, whereas for YCo 0 . 95 Pd 0 . 05 O 3 (Mt3), the best response value is achieved at − 15 . 40 % with the temperature equal to 204 ∘ C.