Lithium niobate and lithium tantalate are among the most widespread materials for nonlinear, integrated photonics. Mixed crystals with arbitrary Nb–Ta ratios provide an additional degree of freedom to not only tune materials properties, such as the birefringence but also leverage the advantages of the singular compounds, for example, by combining the thermal stability of lithium tantalate with the larger nonlinear or piezoelectric constants of lithium niobate. Periodic poling allows to achieve phase-matching independent of waveguide geometry and is, therefore, one of the commonly used methods in integrated nonlinear optics. For mixed crystals, periodic poling has been challenging so far due to the lack of homogeneous, mono-domain crystals, which severely inhibit domain growth and nucleation. In this work, we investigate surface-near (<1μm depth) domain inversion on x-cut lithium niobate tantalate mixed crystals via electric field poling and lithographically structured electrodes. We find that naturally occurring head-to-head or tail-to-tail domain walls in the as-grown crystal inhibit domain inversion at a larger scale. However, periodic poling is possible if the gap size between the poling electrodes is of the same order of magnitude or smaller than the average size of naturally occurring domains. This work provides the basis for the nonlinear optical application of lithium niobate tantalate mixed crystals.
The crystal family of potassium titanyl phosphate (KTiOPO) is a promising material group for applications in quantum and nonlinear optics. The fabrication of low-loss optical waveguides, as well as high-grade periodically poled ferroelectric domain structures, requires a profound understanding of the material properties and crystal structure. In this regard, Raman spectroscopy offers the possibility to study and visualize domain structures, strain, defects, and the local stoichiometry, which are all factors impacting device performance. However, the accurate interpretation of Raman spectra and their changes with respect to extrinsic and intrinsic defects requires a thorough assignment of the Raman modes to their respective crystal features, which to date is only partly conducted based on phenomenological modelling. To address this issue, we calculated the phonon spectra of potassium titanyl phosphate and the related compounds rubidium titanyl phosphate (RbTiOPO) and potassium titanyl arsenate (KTiOAsO) based on density functional theory and compared them with experimental data. Overall, this allows us to assign various spectral features to eigenmodes of lattice substructures with improved detail compared to previous assignments. Nevertheless, the analysis also shows that not all features of the spectra can unambigiously be explained yet. A possible explanation might be that defects or long range fields not included in the modeling play a crucial rule for the resulting Raman spectrum. In conclusion, this work provides an improved foundation into the vibrational properties in the KTiOPO material family.
Stress plays a crucial role in thin films and layered systems, and thus significantly influences the material's electrical, mechanical and (nonlinear) optical responses. Despite lithium niobate's wide applicability as a nonlinear optical material, the impact of mechanical stress on its nonlinear optical properties is not well characterized. In this work, we systematically study both experimentally and theoretically, the nonlinear optical responses of thin film lithium niobate (TFLN) single crystals. Compressive and tensile stress is applied in our experiment using a piezodriven strain cell. We then record the second-harmonic-generated (SHG) response in back-reflection geometry, and compare these results to theoretical modeling using density functional theory (DFT). Both methods consistently reveal that uniaxial stress induces changes of the nonlinear optical susceptibility of certain tensor elements on the order of up to 1 pm/(V GPa). The exact value depends on the tensor element that is addressed in our SHG analysis, on the crystal orientation, and also whether using compressive or tensile stresses. Furthermore, a lowering of the crystal symmetry when applying stress along the x or y crystallographic axes is observed by the appearance of new nonlinear optical tensor elements within the strained crystals. Published by the American Physical Society 2025
Potassium titanyl phosphate (KTP) is a nonlinear optical material with applications in high-power frequency conversion or quasi-phase matching in submicron period domain grids. A prerequisite for these applications is a precise control and understanding of the poling mechanisms to enable the fabrication of high-grade domain grids. In contrast to the widely used material lithium niobate, the domain growth in KTP is less studied, because many standard methods, such as selective etching or polarization microscopy, provides less insight or are not applicable on non-polar surfaces, respectively. In this work, we present results of confocal Raman-spectroscopy of the ferroelectric domain structure in KTP. This analytical method allows for the visualization of domain grids of the non-polar KTP y-face and therefore more insight into the domain-growth and -structure in KTP, which can be used for improved domain fabrication.
We study the DC conductivity in potassium titanyl phosphate (KTiOPO4, KTP) and its isomorphs KTiOAsO4 (KTA) and Rb1%K99%TiOPO4 (RKTP) and introduce a method by which to reduce the overall ionic conductivity in KTP by a potassium nitrate treatment. Furthermore, we create so-called gray tracking in KTP and investigate the ionic conductivity in theses areas. A local unintended reduction of the ionic conductivity is observed in the gray-tracked regions, which also induce additional optical absorption in the material. We show that a thermal treatment in an oxygen-rich atmosphere removes the gray tracking and brings the ionic conductivity as well as the optical transmission back to the original level. These studies can help to choose the best material and treatment for specific applications.
The optical and ferroelectric properties of lithium niobate ( LiNbO 3 , LN), including the orientation of the ferroelectric domains, i.e., the poling behavior, are decisively influenced by dopants. In this study, we apply density functional theory (DFT) to understand the microscopic origin of the beneficial (and impairing) effects of different Mg-doping concentrations, including nominally undoped stoichiometric and congruent compositions, particularly on the ferroelectric domain inversion. Mg Li + tends to be the dominant defect for lower doping concentrations, and a combination of Mg Li + and Mg Nb 3 − for intermediate doping concentrations. Single Mg Li defects are found to be a possible seed point for domain inversion, while the combination of Mg Li and Mg Nb defects is suggested to inhibit poling. In this case, the reaction pathways for the inversion are not symmetric and are characterized by different activation energies for each direction, which could promote the crystal to more easily revert to its original polarization.