Lithium niobate and lithium tantalate are among the most widespread materials for nonlinear, integrated photonics. Mixed crystals with arbitrary Nb–Ta ratios provide an additional degree of freedom to not only tune materials properties, such as the birefringence but also leverage the advantages of the singular compounds, for example, by combining the thermal stability of lithium tantalate with the larger nonlinear or piezoelectric constants of lithium niobate. Periodic poling allows to achieve phase-matching independent of waveguide geometry and is, therefore, one of the commonly used methods in integrated nonlinear optics. For mixed crystals, periodic poling has been challenging so far due to the lack of homogeneous, mono-domain crystals, which severely inhibit domain growth and nucleation. In this work, we investigate surface-near (<1μm depth) domain inversion on x-cut lithium niobate tantalate mixed crystals via electric field poling and lithographically structured electrodes. We find that naturally occurring head-to-head or tail-to-tail domain walls in the as-grown crystal inhibit domain inversion at a larger scale. However, periodic poling is possible if the gap size between the poling electrodes is of the same order of magnitude or smaller than the average size of naturally occurring domains. This work provides the basis for the nonlinear optical application of lithium niobate tantalate mixed crystals.
The optical and ferroelectric properties of lithium niobate ( LiNbO 3 , LN), including the orientation of the ferroelectric domains, i.e., the poling behavior, are decisively influenced by dopants. In this study, we apply density functional theory (DFT) to understand the microscopic origin of the beneficial (and impairing) effects of different Mg-doping concentrations, including nominally undoped stoichiometric and congruent compositions, particularly on the ferroelectric domain inversion. Mg Li + tends to be the dominant defect for lower doping concentrations, and a combination of Mg Li + and Mg Nb 3 − for intermediate doping concentrations. Single Mg Li defects are found to be a possible seed point for domain inversion, while the combination of Mg Li and Mg Nb defects is suggested to inhibit poling. In this case, the reaction pathways for the inversion are not symmetric and are characterized by different activation energies for each direction, which could promote the crystal to more easily revert to its original polarization.
Periodically poled thin‐film lithium niobate (TFLN) crystals are the fundamental building block for highly‐efficient quantum light sources and frequency converters. The efficiency of these devices is strongly dependent on the interaction length between the light and the nonlinear material, scaling quadratically with this parameter. Nevertheless, the fabrication of long, continuously poled areas in TFLN remains challenging, the length of continuously poled areas rarely exceeds 10 mm. In this work, we demonstrate a significant progress in this field achieving the periodic poling of continuous poled areas of 70 mm length with a 3 μm poling period and a close to 50 % duty cycle. We compare two poling electrode design approaches to fabricate long, continuous poled areas. The first approach involves the poling of a single, continuous 70 mm long electrode. The second utilize a segmented approach including the poling of more than 20 individual sections forming together a 70 mm long poling area with no stitching errors. While the continuous electrode allows for faster fabrication, the segmented approach allows to individually optimize the poling resulting in less duty cycle variation. A detailed analysis of the periodic poling results reveals that the results of both are consistent with previously reported poling outcomes for shorter devices. Thus, we demonstrate wafer‐scale periodic poling exceeding chiplet‐size without any loss in the periodic poling quality. Our work presents a key step towards highly‐efficient, narrow‐bandwidth and low‐pump power nonlinear optical devices.
Periodically poled thin-film lithium niobate (TFLN) crystals are the fundamental building block for highly-efficient quantum light sources and frequency converters. The efficiency of these devices is strongly dependent on the interaction length between the light and the nonlinear material, scaling quadratically with this parameter. Nevertheless, the fabrication of long, continuously poled areas in TFLN remains challenging, the length of continuously poled areas rarely exceeds 10 mm. In this work, we demonstrate a significant progress in this field achieving the periodic poling of continuous poled areas of 70 mm length with a 3 microns poling period and a close to 50 % duty cycle. We compare two poling electrode design approaches to fabricate long, continuous poled areas. The first approach involves the poling of a single, continuous 70 mm long electrode. The second utilize a segmented approach including the poling of more than 20 individual sections forming together a 70 mm long poling area with no stitching errors. While the continuous electrode allows for faster fabrication, the segmented approach allows to individually optimize the poling resulting in less duty cycle variation. A detailed analysis of the periodic poling results reveals that the results of both are consistent with previously reported poling outcomes for shorter devices. Thus, we demonstrate wafer-scale periodic poling exceeding chiplet-size without any loss in the periodic poling quality. Our work presents a key step towards highly-efficient, narrowbandwidth and low-pump power nonlinear optical devices.