The Lead-free solders (SAC) with low Ag content have been identified as crucial solder to replace the traditional Sn–Pb solder. The main discussion was presented in two major area of microstructural investigation and mechanical properties of SAC305 and SAC405. Composition and microstructure of SAC solder alloys were investigated by an optical microscope and SEM (Scanning Electron Microscopy). Mechanical properties such as tensile tests and hardness test of the lead-free solder alloys have been tested in this research. Different Ag content and constant Cu content of lead-free solder has been considered in this investigation and compare the mechanical properties of SAC305 and SAC405 solders. From this investigation, tensile strength and hardness have been increased with increased of Ag content.
The cross section of the 86Kr(α, n)89Sr reaction was measured at low energies using the activation technique via the detection of the β− emission from the residual 89Sr nuclei. The theoretical analysis of the measured cross sections shows that the new data can be well described in the statistical model using several recent α-nucleus potentials. The resulting astrophysical reaction rate has small uncertainties between about 15% at higher temperatures and up to a factor of 2 at low temperatures. Using this new reaction rate of the 86Kr(α, n)89Sr reaction for the nucleosynthesis in neutrino-driven outflows in core-collapse supernovae leads to well-constrained production ratios for the nuclei slightly above krypton (Z = 36) like Sr/Zr, Y/Zr, and Mo/Zr. A comparison to observational ratios in metal-poor stars allows to constrain the astrophysical conditions for this weak r-process.
12 October 2020 in Crystal Research and Technology