Globally, the continuous increase of energy consumption coupled with the depletion of the limited fossil fuel sources and their negative impacts on the environment, has shifted focus towards renewables for a sustainable development. For the last fifteen years, the world has enjoyed renewables generation capacity increases in a double-digit Terawatt-hours range. Although renewables consumption is fast developing in Asia Pacific, Europe and North America, significant coordination efforts are required among stakeholders in sub-Saharan Africans countries such as Cameroon. In 2018, the total final energy consumption in Cameroon was 7.41 Mtoe, 74.22% of which was from biomass, 18.48% from fossil fuels and 7.30% from electricity. Furthermore, 6977 GWh of electricity was produced, 78.29% of which from the major electricity operator (ENEO S.A. Cameroon) and 21.71% from independent producers (GLOBELEQ, ALTAAQA Sinohydro China and AGGREKO). More than three quarter of electricity produced were consumed by industry (57.04%) and residential (20.74%) sectors. The country's installed electricity generation capacity rose to 1402 MW, 56.15% of which was from hydropower, 43.84% from fossil fuels (17.55% from natural gas and 26.29% from oil) and 0.01% from solar photovoltaic. The promotion of renewable energy is an important part of Cameroon's plan to increase energy security and provide job opportunities to the country. Yet, the lack of proactive and long-term renewable energy policy and laws, in addition to less attention paid to renewable energy training and research, financing mechanisms, and unaffordable costs of renewable energy technologies to the poor population are amongst present issues hindering the development of renewable energy in the country. Hence, this paper aims to highlight the present status of renewable energy exploitation and development in Cameroon.
Wind data analysis and accurate wind energy potential assessment are critical factors for suitable development of wind power application at a given location. This paper explores wind speed distribution to select the two-parameter Weibull methods that provide accurate and efficient estimation of energy output for Wind Energy Conversion Systems (WECS).The dimensionless shape parameter k and the scale parameter C are determined based on measured hourly mean wind speed data in times-series from 2007 to 2012, collected at the Garoua International Airport, main meteorological station, in Garoua, Cameroon. Six numerical methods, namely Empirical Method (EM), Energy Pattern Factor method (EPF), Graphical Method (GM), Maximum Likelihood Method (MLM), Moment Method (MM) and Modified Maximum Likelihood Method (MMLM) are examined to estimate the Weibull parameters. To analyze the efficiency of the methods and to ascertain how closely the measured data follow the Weibull methods, goodness of fit tests were performed using the chi-square test (X2), correlation coefficient (R2), root mean square error (RMSE) and Kolmogorov-Smirnov test (KOL). The results revealed that the EPF followed by the MM were the most accurate and efficient methods for determining the value of C and k to approximate wind speed distribution. The statistical tests rejected the GM as an adequate method and revealed as well that the EM, MLM and MMLM ranked respectively third, fourth and fifth. Furthermore, the potential for wind energy development in Garoua is not fitted for generating electricity and a very fruitful result would be achieved if windmills were installed for producing community water supply, livestock watering, and farm irrigation.