17 February 2021 in Renewable Energy and Environmental Sustainability
Globally, the continuous increase of energy consumption coupled with the depletion of the limited fossil fuel sources and their negative impacts on the environment, has shifted focus towards renewables for a sustainable development. For the last fifteen years, the world has enjoyed renewables generation capacity increases in a double-digit Terawatt-hours range. Although renewables consumption is fast developing in Asia Pacific, Europe and North America, significant coordination efforts are required among stakeholders in sub-Saharan Africans countries such as Cameroon. In 2018, the total final energy consumption in Cameroon was 7.41 Mtoe, 74.22% of which was from biomass, 18.48% from fossil fuels and 7.30% from electricity. Furthermore, 6977 GWh of electricity was produced, 78.29% of which from the major electricity operator (ENEO S.A. Cameroon) and 21.71% from independent producers (GLOBELEQ, ALTAAQA Sinohydro China and AGGREKO). More than three quarter of electricity produced were consumed by industry (57.04%) and residential (20.74%) sectors. The country's installed electricity generation capacity rose to 1402 MW, 56.15% of which was from hydropower, 43.84% from fossil fuels (17.55% from natural gas and 26.29% from oil) and 0.01% from solar photovoltaic. The promotion of renewable energy is an important part of Cameroon's plan to increase energy security and provide job opportunities to the country. Yet, the lack of proactive and long-term renewable energy policy and laws, in addition to less attention paid to renewable energy training and research, financing mechanisms, and unaffordable costs of renewable energy technologies to the poor population are amongst present issues hindering the development of renewable energy in the country. Hence, this paper aims to highlight the present status of renewable energy exploitation and development in Cameroon.
1 August 2016 in Energy Procedia
This paper explores mountain ridges around Kousseri and Maroua in the far north region of Cameroon for assessing the potential for wind energy development and electricity generation. A 28-year (1985-2013) wind speed data measured at 10 m above ground level (AGL) is statistically analysed using Weibull Distribution, a widely accepted model to probabilistically describe wind speeds variations. Weibull scale and shape parameters are determined using an iterative method, namely, the moment method. The power law relationship is considered to extrapolate Weibull parameters and wind profiles at exposed ridge-tops in the range of 100-300 m AGL. The results show that the selected ridge-tops fall under Class 3 or greater of the international system of wind classification and are deemed suitable for most wind turbine (WT) applications. A performance assessment of five commercial WT (50 to 2000kW) for electricity generation is then realized through the computation of their respective capacity factors, power and energy outputs. Amongst explored WT, YDF-1500-87 (1500kW) emerges as the most attractive option for installation, with the highest capacity factor and the lowest cost of energy
7 April 2021 in Renewable Energy and Environmental Sustainability
BNBello Pierre Ngoussandou
This paper analyses the potential utilization of wind electric pumping for water distribution in off-grid locations of the North Region of Cameroon (NRoC), using ground measured data as well as long-term satellite-derived data. Furthermore, this paper puts emphasis on statistical indexes of accuracy for the comparison of measured (2007–2012) and long-term satellite-derived (2005–2020) data. The outcome of this study clearly indicates that long-term satellite-derived data, obtained through the Prediction of Worldwide Renewable Energy Resources, can be considered as a viable alternative to missing site-specific data from ground stations, mainly in developing countries. The accuracy of satellite-based wind resource is deemed sufficient to provide a reasonable assessment in the initial phase of wind project planning, before in situ measurements with high accuracy are available. To model wind speeds characteristics, the energy pattern factor method (EPF) has been utilized as one of the reliable Weibull distribution methods for the assessment of wind energy potential at desired turbines heights in the selected locations. Five 20-kW pitch-controlled wind turbines (WT) with a hub height of 30 m, are considered to evaluate the power output and energy produced. Volumetric flow rates and costs of water produced are estimated. The results showed that, out of the eight chosen locations, Figuil shows the best combination of capacity factors (CF) and costs of energy (COE), while the site of Poli displays the worst values of CF and COE, no matter which of the five WT is employed. Thus, selecting WT for low wind speeds regimes, should require to combine location wind resource and WT characteristics such as lower cut-in wind speed (1.5 m/s) as well as lower rated wind speed (8.0 m/s) in order to successfully and affordably implement the wind technology in the NRoC.
4 July 2017 in African Journal of Science, Technology, Innovation and Development
1 November 2021 in Energy Reports
17 May 2024 in International Journal of Sustainable and Green Energy
The main objective of this study is to compare thirty-five (35) solar radiation models available in the open literature in order to predict monthly solar radiation in two main cities of Cameroon. This estimation and comparison are based on selected statistical comparison parameters named, root mean square error (RMSE), mean bias error (MBE), mean percentage error (MPE) and determination coefficient (R2). These different models are implemented using regression analysis tools named Exel and MATLAB. Estimated values were compared with measured values according to normalized values of statistical parameters, using measured meteorological data of more than 19 years, from 1984 to 2015. All the models have been classified with their associated ranking according to their statistical parameter accuracy. From this study it appears that the models of Ertekin and Yaldiz (MOD20), Togrul and Onat (MOD28), are more accurate than other models. Indeed, for the city of Maroua (MBE%=-2.82E-14; RMSE%=0.862; MPE=-0.00845; R2=0.985), while for Garoua (MBE%=-9.21E-15; RMSE%=0.806; MPE=-0.00631; R2=0.959). according to their accuracy these models can be therefore be used to predict monthly solar radiation for soudano-sahelian regions of Cameroon. Correlation equations found in this paper will help solar energy researcher to estimate data with trust because of its fine agreement with the observed one. hence the models presented in this study could be used to evaluate accurately the solar radiation at any locations with similar climate.