Matrix converter performs energy conversion by directly connecting input phases with output phases through bidirectional switches. Conventional power converters make use of bulky reactive elements which are subjected to ageing, reduce the system reliability. The matrix converter (MC) stands as an alternative to conventional power converter. Furthermore MC’s provide bidirectional power flow nearly sinusoidal input and sinusoidal output waveform and controllable input power factor. In this work, three modulation methods have been simulated using MATLAB and compared on the basis of input current harmonics, output voltage harmonics and number of switching per cycle. The three techniques simulated are, Optimal Venturini method, Direct Space Vector Modulation (DSVM) and Indirect Space Vector Modulation (ISVM) on Conventional Matrix Converter (CMC) and obtained form Fuzzy c-Means (FCM). DSVM with FCM is proposed for obtainting best results compared to other three techniques.
29 March 2023 in International Transactions on Electrical Energy Systems
Advanced power converters are being developed due to the latest developments in power electronics switches. The matrix converter (MC) assessment is the product of this drastic growth. MC is a bidirectional power flow device with a single-step energy conversion mechanism that operates at variable voltage and frequency. The main drawback of MC is the presence of harmonics due to power electronic device switching. A lot of research has been done to decrease the harmonics content present in the MC, but it is restricted to a certain level only. To overcome this limit, the harmonics are minimized in the MC by incorporating soft computing controllers. This article presents particle swarm optimization (PSO), modified PSO (MPSO), and modified hybrid PSO (MHPSO) based controllers for different loads. The proposed MC with a soft computing controller reduces the harmonics by selecting suitable switching pulses for every sample. The simulations are made using the MATLAB/Simulink environment. The results of the proposed MHPSO controller reduce the THD value from 8.654 with a PSO approach to 7.536 in the presence of nonlinear loads.
Photo-Voltaic systems consisting of long strings are prone to shading effects which result in a decrease in the total power output of the system. The promising solution to this problem is Distributed Maximum Power Point Tracking (D-MPPT) technique where each Photo Voltaic unit is attached to its respective DC-DC converter. Generally, there are two types of D-MPPT architectures: Parallel for high current and series for high voltage applications. There have been some exceptions in the system when the units are joined in series under situations of partial shade. Cross Coupling Effects (CCE) is a term used to describe such exceptions. The coupling effects have been seen with the use of a boost converter. When it is replaced by a SEPIC converter CCE is eliminated, and optimum use of the system can be seen.
1 October 2016 in International Journal of Electrical and Computer Engineering (IJECE)
Matrix converter performs energy conversion by directly connecting input phases with output phases through bidirectional switches. Conventional power converters make use of bulky reactive elements which are subjected to ageing, reduce the system reliability. The matrix converter (MC) stands as an alternative to conventional power converter. Furthermore MC’s provide bidirectional power flow nearly sinusoidal input and sinusoidal output waveform and controllable input power factor. In this work, three modulation methods have been simulated using MATLAB and compared on the basis of input current harmonics, output voltage harmonics and number of switching per cycle. The three techniques simulated are, Optimal Venturini method, Direct Space Vector Modulation (DSVM) and Indirect Space Vector Modulation (ISVM) on Conventional Matrix Converter (CMC) and obtained form Fuzzy c-Means (FCM). DSVM with FCM is proposed for obtainting best results compared to other three techniques.