This paper presents a comprehensive review of advanced technologies with various control approaches in terms of their respective merits and outcomes for power grids. Distributed energy storage control is classified into automatic voltage regulator and load frequency control according to corresponding functionalities. These control strategies maintain a power balance between generation and demand. Besides, three basic electric vehicle charging technologies can be distinguished, i.e. stationary, quasi-dynamic and dynamic control. For realizing charge-sustaining operation at minimum cost quasi-dynamic and dynamic strategies are adopted for in-route charging, while stationary control can only be utilized when the electric vehicle is in stationary mode. Moreover, power system frequency stability and stabilization techniques in non-synchronous generator systems are reviewed in the paper. Specifically, a synchronverter can damp power system oscillations and ensure stability by providing virtual inertia. Furthermore, it is crucial to manage the massive information and ensure its security in the smart grid. Therefore, several attack detection and mitigation schemes against cyber-attacks are further presented to achieve reliable, resilient, and stable operation of the cyber-physical power system. Thus, bidirectional electrical power flows with two-way digital control and communication capabilities have poised the energy producers and utilities to restructure the conventional power system into a robust smart distribution grid. These new functionalities and applications provide a pathway for clean energy technology. Finally, future research trends on smart grids such as IoT-based communication infrastructure, distributed demand-response with artificial intelligence and machine learning solutions, and synchrophasor-based wide-area monitoring protection and control (WAMPC) are examined in the present study.

This paper made an attempt to put forward the comparative performance analysis of different energy storage devices (ESDs), such as redox flow batteries (RFBs), superconducting magnetic energy storage (SMES) device and ultra-capacitors (UCs), in the combined frequency and voltage stabilization of a multi-area interconnected power system (MAIPS). The investigative power system model comprises two areas, and each area consists of the power-generating sources of thermal, hydro and gas units. The intelligent control mechanism of fuzzy PID was used as a secondary controller optimized with a hybridized approach of the artificial electric field algorithm (HAEFA) subjected to the minimization of integral time absolute error (ITAE) objective function. However, the superiority of fuzzy PID in dampening the deviations of combined load frequency control (LFC) and automatic voltage regulator (AVR) responses was revealed upon comparison with conventional PI and PID. Further, the LFC-AVR combined analysis was extended to incorporate different ESDs one after the other. The simulation results reveal the efficacy of incorporating ESDs with the LFC-AVR system and the supremacy of RFBs in damping out the fluctuations in frequency and voltage.

An intelligent control strategy is proposed in this paper which suggests the Optimum Power Quality Enhancement (OPQE) of grid-connected hybrid power systems with solar photovoltaic, wind turbines, and battery storage. Unified Power Quality Conditioner with Active and Reactive power (UPQC-PQ) is designed with Atom Search Optimization (ASO) based Fractional-order Proportional Integral Derivative (FOPID) controller in the proposed Hybrid Renewable Energy Sources (HRES) system. The main aim is to regulate voltage while reducing power loss and reducing Total Harmonic Distortion (THD). UPQC-PQ is used to mitigate the Power Quality (PQ) problems such as sag, swell, interruptions, real power, reactive power and THD reductions related to voltage/current by using ASO based FOPID controller. The developed technique is demonstrated in various modes: simultaneous to improve PQ reinforcement and RES power injection, PRES > 0, PRES = 0. The results are then compared to those obtained using previous literature methods such as PI controller, GSA, BBO, GWO, ESA, RFA, and GA and found the proposed approach is efficient. The MATLAB/Simulink work framework is used to create the model.

An efficient power control technique for inverter-based distributed generation (DG) in an islanded microgrid is investigated in this work. The objective is to raise the caliber of the electricity pumped from network-connected DGs. The characteristics that are taken into consideration include voltage and frequency control, dynamic response, and steady-state response, particularly when the microgrid is operating in island mode or when there is a load change. The control method consists of an internal current control loop and an external power control loop based on a synchronous reference frame and a conventional PI controller. The power controller is designed based on voltage-frequency (VF) control. In addition, an intelligent search technique that combines Particle Swarm Optimization (PSO) and Genetic Algorithm (GA) is utilized to automatically modify power controller parameters. The control technique in this research is that the DG modifies its control mode to modify the system voltage and frequency when the microgrid is islanded or load conditions change. The simulation results in MATLAB/SIMULINK software show that the proposed control system has been able to improve the power quality well.

This paper puts forward the implementation of an intelligent type II fuzzy PID (T2-FPID) controller tweaked with a water cycle algorithm (WCA), subjected to an error multiplied with time area over integral (ITAE) objective index for regularizing the variations in frequency and interline power flow of an interconnected power system during load disturbances. The WCA-based T2-FPID is tested on a multi-area (MA) system comprising thermal-hydro-nuclear (THN) (MATHN) plants in each area. The dynamical behavior of the system is analyzed upon penetrating area 1 with a step load perturbation (SLP) of 10%. However, power system practicality constraints, such as generation rate constraints (GRCs) and time delays in communication (CTDs), are examined. Afterward, a territorial control scheme of a superconducting magnetic energy storage system (SMES) and a unified power flow controller (UPFC) is installed to further enhance the system performance. The dominancy of the presented WCA-tuned T2-FPID is revealed by testing it on a widely used dual-area hydro-thermal (DAHT) power system model named test system 1 in this paper. Analysis reveals the efficacy of the presented controller with other approaches reported in the recent literature. Finally, secondary and territorial regulation schemes are subjected to sensitivity analysis to deliberate the robustness.

The use of alternative energy sources is increasing in daily life to meet the world energy demand. The Distribution Generation (DG) sources place an import role in the smart grid. They are mainly suffering with islanding detection problem. This paper presents the review of various islanding detection methods and parameters for efficient islanding detection in smart grids. The islanding detection methods are majorly classified as passive, active and hybrid islanding detection methods. The advantages, disadvantages and applications of available methods are presented. The best islanding detection parameters are suggested for future islanding detection in smart grids.