Three types of energetic semiconductor bridges (ESCBs) through integrating different Al/MoOx energetic multilayer nanofilms on a semiconductor bridge have been investigated in this study. The relationships among the critical firing energy, critical firing time, total firing time, and ignition energy as well as the input energy utilization efficiency of these initiators were analyzed. The principal component analysis (PCA) was utilized in the experiments to evaluate the output energy magnitude based on the ignition duration, the maximum flame area, reaction ratio, and other parameters. The results obtained were as follows: (1) The critical firing energy is positively proportional to the modulation periods of nanofilms for the initiators discharged with identical voltage, while the total firing energy and the input energy utilization efficiency do not change significantly; (2) by using PCA, the composite score of the ESCB/50 nm, ESCB/150 nm, ESCB/1500 nm, and SCB is measured at 3.025, 0.250, −1.433, and −1.842, respectively, discharge with 30 V/47 μF, which indicated that the output energy of ESCBs can be increased significantly by decreasing the modulation periods of nanofilms.
In order to probe the self-propagating combustion behavior of aluminum/molybdenum trioxide (Al/MoO3) reactive multilayer films (RMFs), RMFs with varied modulation periods and widths were deposited by the magnetron sputtering method on a glass substrate. Differential scanning calorimetry revealed that thermal reaction was in the solid-solid phase at thin modulation periods (50 nm and 150 nm) and in the liquid-solid phase at the microscale (1500 nm). Furthermore, since X-ray diffraction analysis demonstrated the presence of aluminum oxide, the hot spot and pre-oxidation theory of the interface in Al/MoO3 RMFs allowed logical explanation of the thermal reaction feature. The RMFs achieved stable self-propagating combustion with 50 nm–150 nm modulation periods excited by a laser pulse but not at 300 nm–1500 nm. The average stable combustion velocity was 6 m s−1 at the 150 nm modulation period and reached 10 m s−1 for 50 nm. The two-way analysis of variance demonstrated that the effect of the width on combustion velocity was not significant. Thus, we constructed a one-dimensional (1D) combustion velocity model based on heat transfer theory combing experimental data. The model explored the relationship between the stable combustion velocity and the modulation period.