Plastic waste accumulation has been recognized as one of the most critical challenges of modern societies worldwide. Traditional waste management practices include open burning, landfilling, and incineration, resulting in greenhouse gas emissions and economic loss. In contrast, emerging techniques for plastic waste management include microwave-assisted conversion, plasma-assisted conversion, supercritical water conversion, and photo reforming to obtain high-value products. Problems with poorly managed plastic waste are particularly serious in developing countries. This review article examines the emerging strategies and production of various high-value-added products from plastic waste. Additionally, the uses of plastic waste in different sectors, such as construction, fuel production, wastewater treatment, electrode materials, carbonaceous nanomaterials, and other high-value-added products are reviewed. It has been observed that there is a pressing need to utilize plastic waste for a circular economy and recycling for different value-added products. More specifically, there is limited knowledge on emerging plastic waste conversion mechanisms and efficiency. Therefore, this review will help to highlight the negative environmental impacts of plastic waste accumulation and the importance of modern techniques for waste management.

Wettability is the fundamental parameter that influences the productivity of hydrocarbon reservoirs. The knowledge of this regarding shale formation is yet inadequate; thus, detailed analysis is essential for successful development of such reservoirs. The Early Cretaceous Sembar formations in the Lower Indus Basin, Pakistan, is considered as the key target for energy exploration; however, it exhibits large uncertainties due to the lack of data availability. Sembar shales hold significant hydrocarbon volumes rich in organic content; however, prior to this, no comprehensive research has been conducted to quantify the wetting behavior of these shales. Thus, precise information about the wetting behavior of Sembar shale formations is essential, as it is influenced by many factors. Therefore, in this study, we examined the wettability of Sembar shale samples by performing a suit of contact angle (CA) measurements. The CA measurements on shale samples were performed using different salt types (NaCl, KCl, MgCl₂, and Reef Salt) and concentrations of 0.1 M and 0.5 M under ambient pressures and varying temperatures (25-50 °C). The CA was measured via air-brine and air-oil under prevailing pressure and temperature conditions. Subsequently, the sample morphology and surface topography were examined via field emission scanning electron microscopy and atomic force microscopy, respectively. The mineral compositions were obtained via X-ray diffraction studies. The results clearly show that the Sembar shale possesses a mixed wetting behavior. Under dry surfaces, they have large affinity to oil and deionized water in which the droplet spreads quickly on the sample surfaces. Conversely, the samples aged with n-decane and NaCl brines exhibited higher CAs than the untreated samples. Additionally, the CA measured by changing temperatures led to an increase for all brine droplets; the CA further increased as the concentrations of salts increased from 0.1 to 0.5 M. We then discussed the possible reasons for the discrepancy in CA values due to temperature changes and brine concentrations. Moreover, the CA was measured corresponding to the surface roughness from which it appears that it merely affects the wettability of these shale samples. However, the present study results lead to an improved understanding of the wettability of Sembar shale of the Lower Indus Basin in Pakistan.

Wettability is a key parameter for optimizing the residual oil recovery from geological rock formations and it provides a path for improved oil recovery and geo-storage of energy. Thus, the key motive behind wettability alteration from hydrophobic to hydrophilic is to enhance the oil productivity. Thus, this work concentrates on Sui main limestone reservoir core samples’ wettability alteration (altering their surface wetting behavior from an oil-wet to water-wet state) for enhanced oil recovery. Hence, we examine the effectiveness of alumina nanofluid as well as a new chemical methyl blue to alter the wettability. Methyl blue is released on a large scale from various industries, i.e., pharma, textile, and food industries, which is a key environmental concern; subsequently, it contaminates the water table. Hence, the study explores the effects of MB and alumina nanofluid on wettability. The effect of nanofluids formulated via dispersing the alumina nanoparticles in aqueous solutions at various concentrations (0. 0.05, 0.3, 0.50, 0.75, and 1.0 wt. %) were tested for wettability modifications under different physio-thermal conditions. Subsequently, the wettability change was examined for these samples treated with different concentrations of MB (10, 15, 30, 50, and 100 mg/L) for 7 days at two different temperatures (25 and 50 °C). The results show that the hydrophobicity of the SML carbonate rock significantly reverses while treating with alumina nanofluids and MB. Thus, the wettability modification/reversal via the treatment of MB and alumina nanofluids can be an effective mechanism for hydrogen injections and EOR processes.

The wettability of the oil-brine-rock systems is very challenging mainly for the carbonate reservoirs and it plays a significant role to enhance the oil recovery (EOR). Carbonate rocks are mad-up of complex lithology, hence these requires careful treatments in controlling their wetting behavior for enhanced oil recovery. Therefore, it is extremely important to modify their wettability from an oil-wet rock behavior to a water-wet so that the residual oil can be produced efficiently. Thus, the present study has examined the effectiveness of alumina nanofluid as well as a new chemical methyl blue to alter the wettability. The methyl blue is released on massive scale from various industries i.e. pharma, textile and food industry which is a key environmental concern which contaminates the water table. Hence the study, explores the effects of MB and alumina nanofluid on the wettability. The effect of nanofluids formulated via dispersing the alumina nanoparticles in aqueous solutions at various concentration (0. 0.05, 0.3, 0.50, 0.75 and 1.0 wt. %) were tested for wettability modification under different physio-thermal conditions. Subsequently, the wettability change was examined for the samples treated with different concentrations of MB (10, 15, 30, 50 and 100 mg/L) for 7-days at two different temperatures of (25 and 50 0C). The results showed that hydrophobicity of the SML carbonate rock has significantly reversed while treating with alumina nanofluids and MB. Thus, the wettability modification/reversal via treatment of MB and alumina nanofluid can be an effective mechanism to hydrogen injection and for EOR processes.