This paper presents a study and a management of an autonomous hybrid microgrid system based on photovoltaic (PV) and wind renewable energy sources (RES). These power systems deliver electricity to remote locations including isolated villages in either desert or mountains, offshore islands, or military bases where it is either technically difficult or economically unfeasible to connect with the main power grid. In microgrid system based on RES, the power generation is heavily reliant to the meteorological conditions. Moreover, the lifespan of the energy storage systems decreases when the number of operating cycle increases. Therefore, one of the most important issues is the ability to provide the load with the necessary power despite the significant variation of the produced energy. Consequently, a robust energy management strategy is of prime importance in these systems. The paper proposes a design and simulation of an energy management strategy that considers various operation modes of an autonomous hybrid microgrid system. Extensive numerical simulations results performed on MATLAB/Simulink for an autonomous PV/wind microgrid feeding 8kW load at various operating conditions validate the proposed strategy.
This paper introduces an initial version of a standalone interactive numerical simulation tool for assessing power quality in electric submersible pump (ESP) applications. The tool replicates the steady-state behavior of low- and medium-voltage ESPs supplied by pulse-width modulated variable frequency drives (PWM-VFDs) at different operating points. This tool for replicating the voltage current waveforms supplied to the ESP motor and the instantaneous electromagnetic torque in the motor airgap is beneficial for electrical and non-electrical engineers involved in the design, analysis, and operation of ESP power systems. The tool is based on a rigorous modeling approach, where the induction machine and a pump load have been modeled as a two-moment inertia system connected to a multi-pi section model of the transmission cable. A low-voltage two-level VFD connected to a step-up transformer and a medium-voltage cascaded H-bridge multilevel inverter has been incorporated with an optional sine wave filter (SWF). VFDs have closed-loop controllers, with their parameters tuned to accommodate system setup. Depending on the parameters of the systems, more than 1344 operating points can be simulated from the graphical interface, thus showing its wide range of use in the oil and gas industry. To demonstrate the accuracy of the method and the proposed tool, the results of this tool are compared with those from field measurements. This type of tool is new to the ESP industry. It has been covered by an intuitive easy-to-use graphical interface, where only a selection of key system parameters has been enabled and made available to the users. No advanced simulation skills are needed, time and frequency domains’ results are automatically generated and can be easily exported to reports. The tool is a Windows-based standalone software.
With the deployment of the electrolysis system to hundreds of MW (by 2025) or even future GW scale, a down-scaled test bench with the most representative features becomes highly valuable in predicting, preventing, and analyzing system abnormalities during operation. However, such a scaled-down test bench may not be commercially available due to different technology maturity levels in power electronics. For a large-scale electrolysis system, even a test bench with a scaling down factor of 1/10 may cost millions. Technically, it remains unclear how representative a lab-scale testbench system can be to emulate MW-scale electrolysis plant operation, especially with large scaling factors at low cost. In this research, we first explored two potential methodologies for scaling down from the MW scale to a lab-scale test bench. The constant voltage approach allows us to keep four power quality performances (PQ) such as the THD, power factor, ripple factor and the cell current density constants regardless of the scaling factor. However, the electrolyzer resistance is increased with respect to the scaling factor. The constant current approach decreases the resistance with the scaling factor while maintaining the other parameters constant. Further, to mimic the behaviour of the real industrial system as closely as possible, we developed a square-root scaling approach by manipulating four parameters (voltage, current, cell area, and the scaling factor) to scale down the system while keeping five PQ performances on both AC (THD and power factor) and DC side (ripple factor, current density, and the electrolyzer resistance) constants. This theoretical analysis provided a guideline for understanding the similarity between electrolysis systems.
This paper proposes the expressions for the motor airgap torque harmonics induced by a cascaded H-bridge inverter operating with failed cells. These variable frequency drive systems (VFDs), are widely used in oil and gas applications, where a torsional vibration evaluation is a critical challenge for field engineers. This paper proposes mathematical expressions that are crucial for an accurate torsional analysis during the design stage of VFDs, as required by international standards such as API 617, API 672, etc. By accurately reconstructing the electromagnetic torque from the stator voltages and currents in the (αβ0) reference frame, the obtained expressions enable the precise prediction of the exact locations of torque harmonics induced by the inverter under various real-world operating conditions, without the need for installed torque sensors. The neutral-shifted and peak-reduction fault-tolerant control techniques are commonly adopted under faulty operation of these VFDs. However, their effects on the pulsating torques harmonics in machine air-gap remain uncovered. This paper fulfils this gap by conducting a detailed evaluation of spectral characteristics of these fault-tolerant methods. The theoretical analyses are supported by MATLAB/Simulink 2024 based offline simulation and Typhoon based virtual real-time simulation results performed on a (4.16 kV and 7 MW) vector-controlled induction motor fed by a 7-level cascaded H-bridge inverter. According to the theoretical analyses- and simulation results, the Neutral-shifted and Peak-reduction approaches rebalance the motor input line-to-line voltages in the event of an inverter’s failed cells but, in contrast to the normal mode the carrier, all the triplen harmonics are no longer suppressed in the differential voltage and current spectra due to inequal magnitudes in the phase voltages. These additional current harmonics induce extra airgap torque components that can excite the lowly damped eigenmodes of the mechanical shaft found in the oil and gas applications and shut down the power conversion system due torsional vibrations.