Drop impact onto a thin liquid film of another liquid is observed and characterized using a high-speed video system. A new mode of splash – a complete, simultaneous corona detachment – has been observed, which is the result of the lamella breakup near the wall film. The abrupt outward and upward displacement of the lamella leads to an extreme stretching of the corona wall, resulting in its rapid thinning and a rupture. This rupture triggers propagating Taylor–Culick rims, which rapidly spread, meet and, thus, undercut simultaneously the entire corona, resulting in its detachment. Special experiments with the spreading corona impingement onto a fixed needle, supplement the physical evidence of the above-mentioned mechanism. A self-consistent theory of the observed phenomena is proposed and compared with experiments, exhibiting good agreement.
Flapping wing propulsion offers unrivaled maneuverability and efficiency at low flight speeds and in hover. These advantages are attributed to the leading edge vortex developing on an unsteady wing, which induces additional lift. We propose and validate a manipulation hypothesis that allows prolongation of the leading edge vortex growth phase, by delaying its detachment with the aid of flow control. This approach targets an overall lift increase on unsteady airfoils. A dielectric barrier discharge plasma actuator is successfully used to compress secondary structures upstream of the main vortex on a pitching and plunging flat plate. To determine flow control timing and location, the tangential velocity on the airfoil surface is used, which is also used to quantify topological effects of flow control. This flow control is then tested for different motion kinematics on a NACA 0012 airfoil. An increase of the peak circulation of the leading edge vortex of about 20% for all cases with flow control indicates that this approach is applicable for various kinematics, dynamics, and airfoil types.
The impact of a drop onto a liquid film is relevant for many natural phenomena and industrial applications such as spray painting, inkjet printing, agricultural sprays, or spray cooling. In particular, the height of liquid remaining on the substrate after impact is of special interest for painting and coating but also for applications involving heat transfer from the wall. While much progress has been made in explaining the hydrodynamics of drop impact onto a liquid film of the same liquid, the physics of drop impact onto a wall film with different material properties is still not well understood. In this study, drop impact onto a very thin liquid film of another liquid is investigated. The thickness of the film remaining on a substrate after drop impact is measured using a chromatic-confocal line sensor. It is interesting that the residual film thickness does not depend on the initial thickness of the wall film, but strongly depends on its viscosity. A theoretical model for the flow in the drop and wall film is developed which accounts for the development of viscous boundary layers in both liquids. The theoretical predictions agree well with the experimental data.
12 July 2022 in The Canadian Journal of Chemical Engineering
Droplets within droplets occur in numerous situations in which two immiscible liquids interact, for instance, binary drop collisions or when a drop of one liquid impacts onto a film of a different liquid, ejecting secondary droplets containing both liquids. In the present study, an imaging technique for determining the volume fraction of each liquid component in such two-component droplets is introduced, in which multiple images of the same droplet at different times are used. The processing of these images is supported by a machine learning algorithm, which is taught using synthetically generated images and validated on droplets with known mixture fractions placed in an acoustic levitator. The application of the technique is demonstrated by measuring the volume fraction in splashed secondary droplets following the impact of a drop of one liquid onto a film of a different liquid. Graphical
22 December 2024 in International Journal of Multiphase Flow