Shijun Wang

Dr. Shijun Wang

Division of Development, Gansu Electric Power Corporation, State Grid (Research Institute of Economy & Technology), Lanzhou 730000, China

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 July 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
Shijun WangShijun Wang
Shijun Wang
CLChun Liu
Chun Liu
KLKui Liang
Kui Liang
ZCZiyun Cheng
Ziyun Cheng
XKXue Kong
Xue Kong
SGShuang Gao
Shuang Gao
An accurate wind speed prediction system is of great importance prerequisite for realizing wind power grid integration and ensuring the safety of the power system. Quantifying wind speed fluctuations can better provide valuable information for power dispatching. Therefore, this paper proposes a deterministic wind speed prediction system and an interval prediction method based on the Lorentzian disturbance sequence. For deterministic forecasting, a variational modal decomposition algorithm is first used to reduce noise. The preprocessed data are then predicted by a long and short-term neural network, but there is a significant one-step lag in the results. In response to such limitation, a wind speed slope is introduced to revise the preliminary prediction results, and the final deterministic wind speed prediction model is obtained. For interval prediction, on the basis of deterministic prediction, the Lorenz disturbance theory is introduced to describe the dynamic atmospheric system. B-spline interpolation is used to fit the distribution of Lorenz disturbance theory series to obtain interval prediction results. The experimental results show that the model proposed in this paper can achieve higher forecasting accuracy than the benchmark model, and the interval prediction based on the Lorentzian disturbance sequence can achieve a higher ground truth coverage rate when the average diameter is small through B-spline interpolation fitting.

18 January 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
XLXuebo Li
Xuebo Li
TSTianlun Shen
Tianlun Shen
KXKe Xiang
Ke Xiang
Qian ZHAIQian ZHAI
Qian ZHAI
HRHarianto Rahardjo
Harianto Rahardjo
Shijun WangShijun Wang
Shijun Wang
Rainwater infiltration is primarily governed by the soil-water characteristic curve (SWCC) and hydraulic conductivity function (HCF) of soil. Both the SWCC and the HCF are hysteretic during the drying and wetting processes. In a numerical simulation, different seepage results can be obtained by incorporating different hydraulic conductivity functions of soil. In practice, the wetting HCF is commonly estimated from the wetting SWCC using the statistical method, which is named HCFswcc,w in this note. However, there is no study that has verified the results from seepage analyses using HCFswcc,w. Therefore, the objective of this study is to investigate the influence of wetting SWCC and wetting HCF on 1-D water infiltration. The results from the numerical simulations were verified with the instrumentation reading from a soil column. It was observed that the results from the model using wetting HCFPSDF, which defines the wetting HCF estimated using the concept of pore-size distribution function, gave better agreement with the instrumented data. Therefore, both wetting SWCC and wetting HCFPSDF are advised to be used as input information for the numerical simulation of rainwater infiltration.

8 May 2023 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
Shijun WangShijun Wang
Shijun Wang
CLChun Liu
Chun Liu
YTYunfei Tian
Yunfei Tian
XWXing Wang
Xing Wang
TTTeng Tong
Teng Tong
SZSaiyang Zhuo
Saiyang Zhuo
This research examines the uniaxial behavior of core concrete, which is confined by a UHPC (ultra-high-performance concrete) shell, through experimental, numerical, and analytical methods. Various configurations, including different UHPC shell shapes, thicknesses, and core concrete compressive strengths, were tested until failure occurred. Results indicate that the UHPC shell altered the failure modes and enhanced the maximum stress and corresponding strain in uniaxial loading. Additionally, in square and rectangular specimens, debonding between the UHPC and NC (normal concrete) interfaces was observed. Furthermore, we constructed numerical models which integrate the concrete damage plasticity model for NC/UHPC and the coupled adhesive-frictional model implemented in cohesive elements. The model accurately reflects the crack and debonding evolution of the tested specimen. Subsequently, an analytical stress-strain model for uniaxial loading was created based on the experimental results. The confining pressure for square/rectangular specimens was determined using Airys function. The validity of the analytical model was verified by comparing its predictions with the experimental results.

17 April 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
Shijun WangShijun Wang
Shijun Wang
JYJing Yang
Jing Yang
XWXing Wang
Xing Wang
ZZZhong Zhang
Zhong Zhang
Qian ZHAIQian ZHAI
Qian ZHAI
The van Genuchten (1980) (VG) model is one of the most popular and widely used equations to achieve the best fitting of experimental data of the soil-water characteristic curve (SWCC) test. As the best-fitted SWCC is determined from regression analysis, there are various possible solutions for the best-fitted curve (or the determined fitting parameters). The residual error, which is obtained from regression analyses, can be considered as an index indicating the incapability of the SWCC equation in representing the measured SWCC experimental data. As a result, there is always uncertainty associated with determined SWCC from the regression analysis. The residual error from the regression analysis can be used for the quantification of the uncertainty of determined SWCC. In this paper, Taylor’s expansion is adopted, and only the first-order term is considered for the VG model. Subsequently, the variances of the fitting parameters in the VG model are estimated from the residual error. Consequently, the uncertainty of SWCC using the VG model is quantified by using the upper and lower bounds with a 95% confidence level. The artificial soil, composed of mixed sand and kaolin, was prepared for the SWCC measurement. This paper shows that the proposed method can be used to quantify the uncertainty of SWCC from different specimens (a total of 12 specimens).

25 March 2026 in Buildings
Verified
Journal Article
Open access
PDF file
Shijun WangShijun Wang
Shijun Wang
MYMengen Yue
Mengen Yue
Wenming ZhangWenming Zhang
Wenming Zhang
TTTeng Tong
Teng Tong
Ultra-High-Performance Concrete (UHPC) is increasingly used in slender and prestressed structural members due to its superior strength and durability. However, inaccurate or incomplete prediction of creep deformation may lead to excessive long-term deflection, prestress loss, cracking, and potential serviceability or safety risks in buildings and infrastructure. Therefore, reliable prediction methods for UHPC creep are essential for both structural design and long-term performance assessment. In this study, a database containing 60 literature-derived UHPC creep records was compiled to investigate the creep coefficient at approximately 100 days. Pearson correlation analysis revealed strong interdependence among predictors and weak single-variable linear relationships, indicating that creep behavior is governed by nonlinear interactions. A feedforward backpropagation neural network (BPNN) trained using the Levenberg–Marquardt algorithm was developed to predict the creep coefficient. To maintain engineering interpretability, the fib Model Code 2020 (MC2020) formulation was adopted as a code-based benchmark and further calibrated using ridge regression. Results show that the calibrated MC2020 model improves prediction consistency, while the BPNN model provides the highest predictive accuracy. The proposed framework integrates machine-learning prediction with interpretable code-based calibration, contributing to the development of creep modeling approaches for UHPC and providing practical support for the safe design of UHPC structures.