Ke Xiang

Mr. Ke Xiang

Southeast University, Nanjing, Jiangsu, China

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 April 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
YNYaliang Niu
Yaliang Niu
TRTielun Ren
Tielun Ren
QZQiang Zhou
Qiang Zhou
XJXueyang Jiao
Xueyang Jiao
JSJiuqiang Shi
Jiuqiang Shi
Alfrendo SatyanagaAlfrendo Satyanaga
Alfrendo Satyanaga
This study investigates the face stability of small curvature shield tunnels during excavation and its relationship with various excavation parameters. The stability of the excavation face is critical to the safety and efficiency of underground construction projects. Despite the increase in the use of small curvature shield tunnels in urban areas, research works on this type of tunnel are limited and the existing literature focuses only on straight shield tunnels. This study addresses this research gap through numerical simulations, analyzing the effects of different excavation parameters such as jacking force, cutting speed, and soil conditioning on face stability. The results of the study show that the excavation parameters significantly affect face stability. The findings can be used to optimize the performance of small curvature shield tunnels and support their continued development in urban areas.

5 December 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
LTLixian Tang
Lixian Tang
QZQiang Zhou
Qiang Zhou
SWShoulong Wang
Shoulong Wang
WYWenjie Yao
Wenjie Yao
BZBowei Zhang
Bowei Zhang
JTJin Tao
Jin Tao
The transportation system is one of the major infrastructures in urban areas, and it serves 56% of the world’s population. Nowadays, metro lines are developing fast in urban areas. Due to the restrictions of urban fields, metro lines are usually not planned straight, and a curved line is required to connect stations in different locations in a city. As a result, small curvature tunnels are commonly constructed in urban areas. The tunneling construction in a city area may cause ground settlement, which is sensitive to surrounding buildings and underground utilities. The aim of this study is to explore the impact of curvature alignment on the ground settlement. In this paper, ground settlements induced by small curvature shield tunneling were evaluated by using a numerical analysis. A total of six cases were selected for the analysis. The results obtained from the numerical simulations were compared with Peck’s equation. It is observed that Peck’s equation can be used for the estimation of the maximum settlement. However, the ground settlements on both sides of the central axis of the curved tunnel are asymmetrical, and Peck’s equation, which provides a symmetrical settlement, may not be applicable in the case of small curvature tunnels.

25 September 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
XZXiao Zhang
Xiao Zhang
HWHao Wang
Hao Wang
ZGZhiwei Gao
Zhiwei Gao
KXKe Xiang
Ke Xiang
Qian ZHAIQian ZHAI
Qian ZHAI
YCYuan Shen Chua
Yuan Shen Chua
It is known that rainwater infiltration is crucial for rainfall-induced slope failure because the infiltrated water can significantly weaken the shear strength of unsaturated soil. Horizontal drains are commonly used to provide appropriate drainage for the rainwater that percolates out of a slope. However, the effects of the length and location of the subsoil pipe on the performance of horizontal drains have not been extensively investigated. In this paper, a parametric analysis by using a numerical model was adopted to investigate the distribution of pore-water pressure in a slope. The results reveal that an inclination angle of 10–15 degrees and strategic placement at the slope toe and mid-slope provide optimal drainage performance, as compared to the effect of pipe length. Multi-layers of horizontal drain (based on 10 m length) are recommended for slopes with a height of more than 15 m.

18 January 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
XLXuebo Li
Xuebo Li
TSTianlun Shen
Tianlun Shen
KXKe Xiang
Ke Xiang
Qian ZHAIQian ZHAI
Qian ZHAI
HRHarianto Rahardjo
Harianto Rahardjo
Shijun WangShijun Wang
Shijun Wang
Rainwater infiltration is primarily governed by the soil-water characteristic curve (SWCC) and hydraulic conductivity function (HCF) of soil. Both the SWCC and the HCF are hysteretic during the drying and wetting processes. In a numerical simulation, different seepage results can be obtained by incorporating different hydraulic conductivity functions of soil. In practice, the wetting HCF is commonly estimated from the wetting SWCC using the statistical method, which is named HCFswcc,w in this note. However, there is no study that has verified the results from seepage analyses using HCFswcc,w. Therefore, the objective of this study is to investigate the influence of wetting SWCC and wetting HCF on 1-D water infiltration. The results from the numerical simulations were verified with the instrumentation reading from a soil column. It was observed that the results from the model using wetting HCFPSDF, which defines the wetting HCF estimated using the concept of pore-size distribution function, gave better agreement with the instrumented data. Therefore, both wetting SWCC and wetting HCFPSDF are advised to be used as input information for the numerical simulation of rainwater infiltration.

3 September 2024 in Buildings
Verified
Journal Article
Open access
PDF file
LZLibo Zhang
Libo Zhang
GLGuangdong Liu
Guangdong Liu
KXKe Xiang
Ke Xiang
HXHuiyun Xin
Huiyun Xin
JCJianguo Cai
Jianguo Cai
GDGuoliang Dai
Guoliang Dai
This study analyzes the nonlinear seismic behavior of cluster-connected prefabricated shear walls under varying axial compression ratios. The investigation focuses on the connectivity of shear wall segments assembled using cluster connections rather than separate walls connected by beams. Using the finite element software ABAQUS, this study simulates monotonic horizontal displacement loading to evaluate the yield strength, peak strength, and deformation capacity of the shear walls. The results demonstrate that the horizontal load-bearing capacity of the shear wall significantly improves with an increase in axial compression ratio, while the axial compression ratio also influences ductility. The numerical simulations are validated against experimental data, confirming the accuracy of the model. These findings provide essential insights for optimizing the seismic design of precast shear walls.

22 July 2024 in Buildings
Verified
Journal Article
Open access
PDF file
ZHZirui He
Zirui He
XZXiaohan Zhang
Xiaohan Zhang
KXKe Xiang
Ke Xiang
SLShuai Li
Shuai Li
JCJianguo Cai
Jianguo Cai
GDGuoliang Dai
Guoliang Dai
The reinforced part at the bottom of high-rise assembled monolithic concrete shear wall structures generally uses cast-in-place concrete due to high elastic–plastic deformation capacity requirements, which limits the advantages of prefabricated shear wall structures. This study investigates the feasibility of using cluster connections to assemble integral shear wall structures at the bottom by modifying the vertical reinforcement of the cluster connection. Numerical simulations using ABAQUS (Version 2019) were validated with laboratory test results. The seismic performance of prefabricated shear walls with cluster connections was examined under varying axial compression ratios. Results indicate that the prefabricated shear wall demonstrates higher bearing and deformation capacity compared to cast-in-place shear walls. The degradation of strength and equivalent stiffness in prefabricated walls is slower, showing better seismic performance under higher axial compression ratios. The cluster connection ensures effective force transmission, maintaining wall integrity. After optimization, the prefabricated shear wall with cluster connection meets the expected seismic performance, providing a basis for its application in reinforced bottom sections.