In this study, the etherification reaction of glycerol (G) with tert-butyl alcohol (TBA) was investigated for the production of high quality transportation fuel additives. The reaction was carried out in liquid phase, in a continuous flow reactor in the presence of various solid acid catalysts. Activities of acidic resin catalysts, such as Amberlyst-15 (A-15), Amberlyst-16 (A-16) and Amberlyst-35 (A-35), Nafion-SAC-13 and ?-alumina were compared. Significant increase in conversion was observed with an increase in temperature. Amberlyst 15 showed the highest activity at about 110°C, giving glycerol conversion values of about 0.5 at a space time of 18 g cm-3 s. However, A-16 gave higher di-ether selectivity values. Nafion-SAC-13 showed activity at higher temperatures, while the activity of ?-alumina was very low, even at 400°C.
Core-shell-type catalysts, which are synthesized by encapsulating the Cu-ZnO-Alumina type methanol synthesis catalyst (CZA) by silicotungstic acid (STA)-incorporated mesoporous alumina, were prepared following a hydrothermal route and tested in DME synthesis from syngas and CO2. Activity tests, which were performed in the pressure range of 30–50 bar, and the temperature range of 200–300 °C, with different feed compositions (CO2/CO/H2: 50/-/50, 40/10/50, 25/25/50, 10/40/50) showed that the best-operating conditions for the highest DME yield were 275 °C and 50 bar. Results proved that the presence of CO2 in the syngas had a positive effect on the DME yield. The total conversion of CO + CO2 increased with an increase in CO2/CO ratio. An overall conversion of CO + CO2 and DME selectivity values were obtained as 65.6% and 73.2%, respectively, with a feed composition of H2/CO2/CO = 50/40/10. Synthesis of methanol using the CZA catalyst from the CO2-containing gas mixtures was also investigated, and the total conversion of CO + CO2 and methanol selectivity values of 32.0% and 83.6%, respectively, were obtained with the H2/CO2/CO = 50/40/10 gas mixture. Results proved that the new STA incorporated core-shell-type bifunctional catalysts were highly promising for the conversion of CO2-containing syngas to DME.