In this study, the electrodeposition (ED) of ultrathin, compact TiO2 blocking layers (BLs) on fluorine-doped tin oxide (FTO) glass for perovskite solar cells (PSCs) is evaluated. This bottom-up method allows for controlling the morphology and thickness of TiO2 films by simply manipulating deposition conditions. Compared with BLs produced using the spin-coating (SC) method, BLs produced using ED exhibit satisfactory surface coverage, even with a film thickness of 29 nm. Evidence from cyclic voltammetry shows that an ED BL suppresses interfacial recombination more profoundly than an SC BL does, consequently improving the photovoltaic properties of the PSC significantly. A PSC equipped with an ED TiO2 BL having a 13.6% power conversion efficiency is demonstrated.
29 November 2012 in The Journal of Physical Chemistry C
A novel, aqueous precursor system (Pb(NO3)2 + water) is developed to replace conventional (PbI2 + DMF) for fabricating methylammonium lead iodide (MAPbI3) perovskite solar cells (PSCs).
We have devised a new porphyrin dye Y1A1 for photovoltaic applications under both light sources of AM1.5G standard conditions and low light intensity at 300–2400 lux. The dye Y1A1 is tailored with two 3,5-di-tert-butyl-4-methoxyphenyl groups at meso-10,20-positions which helps the solubility of the molecule in solvents and avoids involvement of the hazardous chemical n-butyllithium, which is used during the synthesis of some typical high efficiency porphyrins such as YD2-o-C8 and LD-series dyes. The dye is also structurally simple so that large-scale synthesis for future industrial applications becomes feasible. The Y1A1-based cells were found to exhibit higher performance using I−/I3− rather than Co2+/3+ electrolytes in the presence of CDCA co-adsorbent. The addition of Li+ additive to the GuSCN-free electrolyte benefits the performance in terms of higher capacitance at the compensation of surface charge recombination and electron lifetime. The optimized cells based on Y1A1 showed a power conversion efficiency of 9.22% under AM1.5G conditions and as high as 19.5% when illuminated under 350 lux of LED light.