Interfaces play a decisive role in perovskite solar cells’ power conversion efficiency and their long‐term durability. Small‐molecule hole‐transporting materials (HTMs) have grabbed enormous attention due to their structural flexibility, material properties, and stabilities, allowing for improved operational durability in perovskite photovoltaics. This study synthesizes and investigates a new class of benzimidazole‐based small molecules, named YJS001 and YJS003, serving as the HTMs to enable high‐efficiency mixed‐cation mixed‐halide perovskite solar cells. The benzimidazole‐based materials are dopant‐free HTMs composed of donor and acceptor building blocks that are designed to engineer the energy level alignment near the HTM/perovskite interface. Mixed‐cation mixed‐halide perovskites can be grown uniformly on both HTMs with large crystalline grains. It is discovered that the donor‐rich YJS003‐based solar cell exhibits a high open‐circuit voltage of 1.09 V with a champion power conversion efficiency of over 20%. Power‐dependent current–voltage characteristics of the solar cells are analyzed, from which the high performance of YJS003's excellent hole mobility and well‐aligned energy level is attributed. This work introduces a new class of benzimidazole‐based small molecules as HTMs, that paves the path for dopant free interface material development for commercialization of perovskite solar cells.
Two dipolar molecules based on a thieno-imidazole core, AI109 and AI112, were developed to study the effect of imparting polarity on the hole transport properties in inverted perovskite solar cells (PSCs). These hole transport materials (HTMs) exhibit comparable optoelectronic properties but distinct film morphology and charge transport characteristics. Besides, the new materials with very low concentrations (1 mg mL−1) are able to form smooth and continuous films. The PSCs based on AI109 and AI112 without any dopants and additional interlayers have achieved increased power conversion efficiencies of 13.32% and 13.42%, respectively, compared to those of the standard HTMs, 2,2′,7,7′-tetrakis(N,N′-di-p-methoxyphenylamino)-9,9′-spirobifluorene [Spiro-OMeTAD, (11.62%)] and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate [PEDOT:PSS, (12.01%)]. The excellent hole mobility and the superior film morphology of the AI-HTMs account for their higher efficiencies.
Small-molecule hole-transporting materials (HTMs) have gained much attention due to their structural flexibility, material properties, and stabilities, allowing for enhanced operational durability in perovskite photovoltaics. We synthesized and investigated a new class of donor–acceptor–donor (D–A–D) configured ligand type hetero-structured small molecule, WWC106, serving as the HTM to enable high-efficiency mixed-halide lead perovskite solar cells. WWC106 is a benzimidazole-centered dopant-free HTM composed of three donors: two 4-methoxy-N-(4-methoxyphenyl)-N-phenylanilines (TPAs) and one 2-(2,2-bis(4-methoxyphenyl)vinyl)-5-methylthiophene. One of the two TPA donors is linked to the benzimidazole via a pyridine unit. Scanning electron microscopy, photoluminescence (PL) time-resolved PL, and space charge limited current measurements on WWC106 HTMs show perovskite formation with good morphology, efficient hole extraction, and hole mobility. The new D–A–D configured WWC106-based device exhibited a high open-circuit voltage of 1.09 V and a high short circuit current density of 20.76 mA cm−2, with the highest power conversion efficiency of 17.75%.