Industrial scale implementation of post combustion CO2 capture (PCCC) can be hindered by solvent emissions due to its impact on the environment and the operating costs. The issue of aerosol based emissions has only been recently reported for a PCCC process and very little fundamental knowledge is available in the scientific community on this topic. Therefore, it is important to understand the mechanism of aerosol formation and growth so that appropriate countermeasures can be applied in reducing the total emissions. In this study, a simplified methodology is presented for predicting aerosol based emissions from a CO2 capture column of a PCCC process. The basis of this methodology is to split the counter-current gas-liquid interaction from the co- current gas-aerosol interaction. The absorption column is discretised into multiple alternating gas-liquid and gas-aerosol sections in Aspen Plus with an assumption that aerosols behave as a continuous phase rather droplets. The degree of supersaturation, which is important for aerosol formation and growth, is calculated along the column. The effect of the changes in parameters of the PCCC plant, such as the CO2 content of the inlet flue gas, the lean solvent temperature and the lean solvent loading on aerosol based emissions are investigated. The aerosol based emissions follows the trend of the supersaturation ratio in the absorber column
8 May 2015 in Industrial & Engineering Chemistry Research
Oxidative degradation is a serious concern for upscaling of amine-based carbon capture technology. Different kinetic models have been proposed based on laboratory experiments, however the kinetic parameters included are limited to those relevant for a lab-scale system and not a capture plant. Besides, most of the models fail to recognize the catalytic effect of metals. The objective of this work is to develop a representative kinetic model based on an apparent auto-catalytic reaction mechanism between solvent degradation, corrosion and ammonia emissions. Measurements from four different pilot plants: (i) EnBW’s plant at Heilbronn, Germany (ii) TNO’s plant at Maasvlakte, The Netherlands; (iii) CSIRO’s plants at Loy Yang and Tarong, Australia and (iv) DONG Energy’s plant at Esbjerg, Denmark are utilized to propose a degradation kinetic model for 30 wt % ethanolamine (MEA) as the capture solvent. The kinetic parameters of the model were regressed based on the pilot plant campaign at EnBW. The kinetic model was validated by comparing it with the measurements at the remaining pilot campaigns. The model predicted the trends of ammonia emissions and metal concentration within the same order of magnitude. This study provides a methodology to establish a quantitative approach for predicting the onset of unacceptable degradation levels which can be further used to devise counter-measure strategies such as reclaiming and metal removal.