Metal alloys and intermetallic compounds offer an attractive method for safely storing hydrogen (H2). The metal alloys absorb H2 into their structure, often swelling and fracturing as a result of phase transformation during hydride formation/decomposition cycles. The absorption of H2 is an exothermic process, requiring the effective and efficient removal of heat. This can be challenging as heat transfer to/from powdered beds is notoriously difficult, and often limited by poor thermal conductivity. Hence, the observed reaction kinetics for absorption and desorption of H2 is dominated by heat flow. The most common method for improving the thermal conductivity of the alloy powders is to prepare them into composite structures with other high thermal conductivity materials, such as carbons and expanded natural graphite. Such composite structures, some also combined with polymers/resins, can also mitigate safety issues related to swelling and improve cyclic durability. This paper reviews the methods that have been used to prepare such composite structures and evaluates the observed impact on thermal conductivity.
29 May 2013 in Greenhouse Gases: Science and Technology
Oxidative degradation is a serious concern for upscaling of amine-based carbon capture technology. Different kinetic models have been proposed based on laboratory experiments, however the kinetic parameters included are limited to those relevant for a lab-scale system and not a capture plant. Besides, most of the models fail to recognize the catalytic effect of metals. The objective of this work is to develop a representative kinetic model based on an apparent auto-catalytic reaction mechanism between solvent degradation, corrosion and ammonia emissions. Measurements from four different pilot plants: (i) EnBW’s plant at Heilbronn, Germany (ii) TNO’s plant at Maasvlakte, The Netherlands; (iii) CSIRO’s plants at Loy Yang and Tarong, Australia and (iv) DONG Energy’s plant at Esbjerg, Denmark are utilized to propose a degradation kinetic model for 30 wt % ethanolamine (MEA) as the capture solvent. The kinetic parameters of the model were regressed based on the pilot plant campaign at EnBW. The kinetic model was validated by comparing it with the measurements at the remaining pilot campaigns. The model predicted the trends of ammonia emissions and metal concentration within the same order of magnitude. This study provides a methodology to establish a quantitative approach for predicting the onset of unacceptable degradation levels which can be further used to devise counter-measure strategies such as reclaiming and metal removal.