Fracture toughness is a critical indicator for the application of NiTi alloys in medical fields. We propose to enhance the fracture toughness of NiTi alloys by controlling the spatial grain size (GS) gradient. Utilizing rolling processes and heat treatment technology, three categories of NiTi alloys with distinct spatial GS distributions were fabricated and subsequently examined through multi-field synchronous fracture tests. It is found that the one with a locally ultra-high GS gradient (20 nm−3.4 μm) has significantly enhanced fracture toughness, which is as high as 412% of that of the normally distributed nano-grains with an average GS of 8 nm and 178% of that of the coarse-grains with an average GS of 100 nm. Theoretical analysis reveals that in such a gradient structure, phase transition in the coarse-grained matrix greatly absorbs the surface energy of subcritical and stable propagation. Meanwhile, the locally non-uniform GS distribution leads to deviation and tortuosity of the crack path, increasing the critical fracture stress. Furthermore, the nanocrystalline clusters distributed in the form of network nodes reduce the stress intensity factor due to their higher elastic modulus compared to the coarse-grained matrix. This work provides guidance for developing new gradient nanostructured NiTi alloys with high fracture toughness.
Freshwater shortages have attracted increasing global concern. Solar-driven evaporation from wastewater or seawater has emerged as a promising technology to collect fresh water; however, achieving high-evaporation efficiency remains a significant challenge. Here, we propose a capillary-regulated solar evaporator, CHALS, derived from agricultural waste—specifically, lotus stems. CHALS is constructed by the carbonization and hydrophilization of a compressed assembly of lotus stems. The compression, followed by carbonization, narrows the straight capillary channels; subsequent oxygen plasma treatment optimizes surface hydrophilicity. The two synergistic effects jointly elevate the Laplace capillary driving force to greatly accelerate internal water transportation. Meanwhile, the straight-through channels provide the shortest pathway for water transportation. Moreover, the efficient photothermal conversion raises the surface temperature of CHALS up to 65 °C. Benefiting from these synergistic effects, CHALS achieves an evaporation rate of 2.60 kg·m−2·h−1 under 1 sun irradiation. The work not only provides an agricultural waste-derived solar evaporator but also establishes a capillary-regulation strategy to boost solar evaporation efficiency.
1 April 2023 in Journal of Physics: Conference Series
To achieve non-contact in situ detection of stress intensity factors (SIF), this paper innovatively adopts the advanced IRT and DIC synchronous detecting system to measure SIFs as using plastic zone range to assist in determining the state of stress fields. Though this synchronous detecting method has been applied to analyze thermomechanical coupling effects of materials, it has never been used to detect SIFs, which requires a high accuracy of point stress state detection. Thus, to testify its feasibility and accuracy in SIF detection, three engineering materials were subjected to various loading conditions to provide sufficient verification. Firstly, the coefficients of volumetric strain and temperature change of different materials were calibrated by thermocouple and infrared thermography. Then, the compact tensile specimens were subjected to high-speed loading, of which the SIFs and plastic zone ranges were computed by taking several measurement points on infrared and deformation images. Compared with the theoretical values, the errors of the SIF and K-dominated range measured by this experimental method are all within 5%. It demonstrates that the synchronous detecting method has a wide application prospect in high-accurate crack tip strain field and crack development analysis.