In this study, defected ground structures (DGSs) are applied in the coupling schemes of a planar tunable filter to achieve constant absolute bandwidth (CAB). The filter consists of parallel-coupled quarter-wavelength resonators loaded with varactor diodes, and the DGSs are implemented to enhance the coupling at a certain part. This method enables controlling the ratio between electric coupling and magnetic coupling and makes the total coupling coefficient inversely proportional to frequency, as required to achieve CAB. With the DGSs, the tunable resonators can be equalized to stepped-impedance tunable resonators, which bring wider-frequency tuning range. Moreover, due to the help of the DGS in adjusting the coupling coefficient curve versus frequency, the resonators maintain their universal widths and are coupled at full length. Thus, the tunable filter is as compact as a traditional combline filter. Meanwhile, each external coupling scheme contains a series capacitor and a short-ended stub that is parallel coupled to the first or last resonator, resulting in external $Q$ factor being proportional to frequency. A second-order tunable filter is designed and measured, and a wide tuning range from 0.63 GHz to 1.09 GHz together with a constant bandwidth of 65±4 MHz are achieved. Besides, a transmission zero generated by coupling zero of the DGS-loaded coupling structure can be observed at the high stopband. The total dimension of the filter is 0.05 $\lambda _{\mathrm {g}}^{\ast }~0.15 \lambda _{\mathrm {g}}$ , which is more compact than solutions with partial-length coupling schemes. Owing to the simple structures of the resonators and coupling schemes, the filter solution has the potential to design high-order tunable filters with CAB, and a compact fourth-order tunable filter with ABC is given with simulation results.
The long outstanding human inspiration to be able to traverse intra-city destinations aerially, avoiding traffic congestions is on the brink of materialization. Flight trials of Air Taxis pave the way for Urban Air Mobility (UAM). However, the greater challenge resides in formulating the Urban Air Traffic Management (UATM) structure and procedures to enable multiple aircraft to safely navigate their way in urban skies. The key technologies enabling UATM are Communications, Navigation and Surveillance (CNS) systems. This paper presents a proposed configuration for CNS System to support UATM. Aircraft for UAM are supposed to operate within the aerial bounds of the cities away from conventional air traffic. Thus air traffic would be much denser and the Air Traffic Management (ATM) system required to control air mobility must provide integrity, robustness, security and high geo-spatial accuracy. Additionally, there is also a need for fast and accurate communication between traffic controller and the air vehicle. Communication requirements for UAM include Vehicle-to-Vehicle (V2V), Vertiport to vertiport and Vertiport to Vehicle communication. Navigation requires Self-positioning and Situational-awareness. Surveillance needs to be able to perform Ground stations detecting and tracking aircraft, position and Identification updates. The paper presents the concept of operation, architecture of CNS systems fulfilling these requirements. The region of flight operations is the capital city of Islamabad and adjoining regions. The viability of the proposed structure is verified through simulations carried out in GNU Octave software.
7 April 2021 in IEEE Aerospace and Electronic Systems Magazine
A comprehensive approach is offered for avionics engineering topics and curricula for educational activities that better meet contemporary aerospace industry requirements. These topics include a growing demand for airspace mobility services, the proliferation of unmanned aircraft systems (UAS), and the required enhancements in avionics and air traffic management (ATM) design standards (hardware and software components); targeting the evolving safety, interoperability, and cybersecurity needs of the aeronautical and space sectors. Proposed topics and approaches stem from the Institute of Electrical and Electronics Engineers (IEEE) Aerospace and Electronics Systems Society (AESS) Avionics Systems Panel (ASP) discussions aimed at aligning educational approaches to relevant industry needs and technical advancements in the field of avionics engineering. Suitable curricular development approaches are proposed to address the career life cycle of avionics engineers, including undergraduate and graduate education. Collaborative exchange and discussion, including both industrial and academic perspectives, focus on informing curricular development approaches that bridge the gaps between higher education, industry practice, and public stakeholder needs toward maximizing educational outcomes and preparedness of the avionics engineering workforce to tackle some of the most important challenges and opportunities faced by the aerospace sector.
This study presents a novel design of ultra-wideband (UWB) impedance transformers and power dividers with filtering capabilities. Based on the UWB impedance matching network, the UWB filtering impedance transformers are designed, and the UWB filtering power dividers are achieved by impedance transforming one port of one or more impedance transformers. The transformers consist of a multi-mode stepped-impedance resonator (SIR) and defected ground structures (DGSs). The SIR is tightly coupled to two ports of different impedance levels via the unsymmetrical two-sided coupled lines and DGSs. In addition, two transformers that convert impedance from 50 Ω to 100 Ω are connected to form a UWB power divider with filtering function. The 25 Ω port of an impedance transformer with a 50 Ω to 25 Ω conversion is impedance matched to two 50 Ω ports connected in parallel, resulting in another power divider with filtering function. Thus, two prototype UWB impedance transformers from 50 Ω to 100 Ω and from 50 Ω to 25 Ω are designed and their corresponding power dividers are also designed and fabricated. The simulated and measured results are consistent, demonstrating good features, such as return loss greater than 10 dB and insertion loss less than 4.5 dB in the passband, UWB filtering capacity with out-of-band rejection greater than 20 dB, and compact size smaller than 1.2λ × 2.1λ (λ is the wavelength of the central frequency).