Yun Liu

Dr. Yun Liu


Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 March 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
FAFaisal Amin
Faisal Amin
YLYun Liu
Yun Liu
YZYongjiu Zhao
Yongjiu Zhao
SHSanming Hu
Sanming Hu
This article proposes a novel inverted-E topology for the design of phase shifters and multibit phase shifters. The novel phase shifter consists of a 50 Ω main transmission line (MTL) symmetrically loaded with equally spaced three open-/short-circuited stubs via P-I-N switching diodes. The stubs provide the needed susceptances to achieve a phase shift with large value range. Thanks to the design flexibility of the topology, 2 N -1 sets of stubs can share the same MTL, providing 2 n phase states of an N-bit phase shifter. Design theory and performance analysis of the design variables are presented, followed by the analysis and simulation of four 22.5°, 45°, 90°, and 180° phase shifters. For validation and comparison, two typical 45° and 90° phase shifters and a 3-bit phase shifter, providing eight distinct phase states, have been fabricated and measured. The measured results show good agreement with analysis and simulation. In comparison to its traditional counterparts, the novel design yields a highly compact phase shifter because the separation between the loading elements on the MTL can be less than quarter wavelength, whereas low insertion loss is achieved because the diodes are loaded to the branches. In addition, multibit phase shifter in single unit can be realized with much shorter length and lower insertion loss.

1 November 2014 in Electronics Letters
Verified
Journal Article
Open access
PDF file
CCChenwei Cui
Chenwei Cui
YLYun Liu
Yun Liu
A quad‐band bandpass filter of compact dimensions by embedding several dual‐mode notch elements into a stub‐type dual‐band bandpass filter is presented, and the four passbands are achieved by splitting the two passbands of the dual‐band bandpass filter with two notch bands generated by the dual‐mode notch elements. A prototype filter with passbands located at 1.4–1.7, 2.1–2.3, 3.3–3.6 and 5.2–5.4 GHz is designed with the help of optimisation methods. Good agreement between simulations and measurements are achieved, demonstrating good features such as controllable and wide bandwidths, higher filter order, compact dimensions and high isolations.

24 April 2009 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
YLYun Liu
Yun Liu
WDWenbin Dou
Wenbin Dou
In this letter, we present a novel network for dual-band filter, the circuit of which is a mixture of shunt stub bandpass filter and shunt serial resonator bandstop filter. The stopband of the bandstop filter will split the passband of the bandpass filter and result in a dual-band response. The simulated and measured results are given. This kind of filter has the advantage of bigger and controllable bandwidths and lower insertion loss compared with traditional SIR dual-band filters.

10 August 2018 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
YLYun Liu
Yun Liu
In this paper, broad multiband impedance matching networks (MBIMNs) are synthesized for frequency-dependent complex loads. The MBIMNs are derived from a multiband bandpass topology that is obtained by conducting multiple low-pass-bandpass transformations and by sharing one topology for all matching bands. The concept of a frequency-dependent voltage transformer is then used for generating a frequency-dependent load conductance, while the load susceptance is borrowed from the nearest susceptance unit of the topology. The resulted MBIMN contains several multimode resonators that are practically realized by parallel connections of series LCs and series connections of parallel LCs, and iterative methods are used for extracting the circuit parameters. Three dual-band examples and one triband example are designed and simulated, and two of them are fabricated and measured, with compared results sufficiently demonstrating the feasibility of the topologies and theories. Broad bandwidths referring to low reflection coefficients are observed. The topologies and methods can also be expected to realize more than three matching bands provided with enough convenience in circuit implementation. Multiband bandpass filtering is another important function of the matching networks.

2 November 2017 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
YLYun Liu
Yun Liu
SJShuai Jiang
Shuai Jiang
SZShuang Zhu
Shuang Zhu
YTYubo Tian
Yubo Tian
YWYongle Wu
Yongle Wu
In this paper, a symmetric stepped-impedance coupled line (SSICL) is proposed to realize dual-band quarter-wave coupled line (DQCL), giving the same equivalent even and odd characteristic impedances at two different frequencies. The DQCL can be directly used to design dual-band parallel-line coupler (DBPC) with arbitrary coupling coefficient and large frequency ratio, resulting in even shorter total length when compared with traditional quarter-wave parallel-line coupler working at lower frequency f₁. In addition, broad DBPC (BDPC) is constructed by cascading multiple sections of SSICLs, as the SSICL is quite similar with quarter-wave coupled line in circuit. For demonstrating the design methods, in the first step, two edge-coupled 20-dB DBPCs and one broadside coupled 6-dB DBPC, working at 1/5.2, 1/7.5, and 1/5.2 GHz, respectively, are designed, fabricated and measured, exhibiting good features like large frequency ratio, high isolations, and compact dimensions. Then, for broadening bandwidths, three-section BDPC working at 1 GHz/5.2 GHz is designed and measured, resulting in working bandwidths larger than 1.2 GHz. These good features have proved the feasibility of the proposed circuits and the corresponding design methods.

29 October 2021 in IEEE Access
Verified
Journal Article
Open access
YLYun Liu
Yun Liu
LLLingyun Liu
Lingyun Liu
CLChen Liang
Chen Liang
IMIrfan Majid
Irfan Majid
In this study, defected ground structures (DGSs) are applied in the coupling schemes of a planar tunable filter to achieve constant absolute bandwidth (CAB). The filter consists of parallel-coupled quarter-wavelength resonators loaded with varactor diodes, and the DGSs are implemented to enhance the coupling at a certain part. This method enables controlling the ratio between electric coupling and magnetic coupling and makes the total coupling coefficient inversely proportional to frequency, as required to achieve CAB. With the DGSs, the tunable resonators can be equalized to stepped-impedance tunable resonators, which bring wider-frequency tuning range. Moreover, due to the help of the DGS in adjusting the coupling coefficient curve versus frequency, the resonators maintain their universal widths and are coupled at full length. Thus, the tunable filter is as compact as a traditional combline filter. Meanwhile, each external coupling scheme contains a series capacitor and a short-ended stub that is parallel coupled to the first or last resonator, resulting in external $Q$ factor being proportional to frequency. A second-order tunable filter is designed and measured, and a wide tuning range from 0.63 GHz to 1.09 GHz together with a constant bandwidth of 65±4 MHz are achieved. Besides, a transmission zero generated by coupling zero of the DGS-loaded coupling structure can be observed at the high stopband. The total dimension of the filter is 0.05 $\lambda _{\mathrm {g}}^{\ast }~0.15 \lambda _{\mathrm {g}}$ , which is more compact than solutions with partial-length coupling schemes. Owing to the simple structures of the resonators and coupling schemes, the filter solution has the potential to design high-order tunable filters with CAB, and a compact fourth-order tunable filter with ABC is given with simulation results.