Hydrothermal carbonization (HTC) is an attractive, green technology for the management of sewage sludge. In this study, low-value secondary sewage sludge was subjected to an HTC treatment in a 1 L batch hydrothermal reactor and transformed into a high-energy-density hydrochar under varying HTC conditions (temperature of 150–300 °C, carbonization time of 30–150 min and a solid loading of 10–30%). The resulting hydrochar fuel characteristics were analyzed for ultimate and proximate analyses, functional group composition and energetic parameters. It was found that the hydrochar yield decreased with the increasing HTC temperature and reaction time, primarily due to the loss of organic volatile matter and functional groups. Under the optimum conditions of 150 °C, 30 min of carbonization time and 30% solid loading, 80.56% of the hydrochar was recovered, providing a maximum energy yield of 90.32% and a high heating value of 18.49 MJ/kg. Compared to the raw sewage sludge (H/C ratio of 2.67 and O/C ratio of 0.51), the hydrochar also had lower H/C and O/C atomic ratios of 1.42 and 0.18, respectively. The results suggest that significant dehydration and decarboxylation during the HTC treatment of sewage sludge have resulted in the formation of carbonaceous hydrochar with energetic properties close to the sub-bituminous coals.
11 July 2025 in International Journal of Renewable Energy Development
Sewage sludge, a byproduct of wastewater treatment, poses significant risks to human health and ecosystems due to its high levels of harmful pollutants, including heavy metals, viruses, and non-biodegradable materials. To mitigate these hazards, thermochemical conversion has emerged as a sustainable strategy for recovering energy and nutrients while reducing the toxicity of sewage sludge. A comprehensive literature search across Science Direct, Scopus, and Web of Science yielded 46 peer-reviewed papers from an initial 2,715 publications. This paper presents a systematic review of the thermochemical conversion processes used to transform sewage sludge into solid fuels, focusing on pyrolysis, torrefaction, and hydrothermal carbonization. The study highlights the significance of optimizing operational parameters and investigates the physicochemical properties of the biochar produced. The results indicate that reaction temperature, time, and heating rate significantly influence the quality and yield of the resulting biochar. Higher temperatures (300–1000°C) enhance the energy content while reducing solid yield. The environmental impacts associated with thermochemical methods, including emissions and potential pollutants, are discussed along with the challenges in treating and transforming sewage sludge into solid fuels. These findings indicate that hydrothermal carbonization is a promising method for waste management and energy production, supporting global efforts to reduce greenhouse gas emissions and dependence on fossil fuels. However, challenges remain in scaling up these technologies for commercial implementation due to high capital and operational costs This review contributes to the understanding of thermochemical processes and their potential applications in sustainable waste-management practices. Future research should focus on pilot and industrial-scale validation, cost-effective pretreatment strategies, and standardized analytical methods. Supportive policy frameworks and investment in demonstration projects are crucial for promoting thermochemical conversion as a viable waste-to-energy solution, contributing to sustainable development and climate change mitigation.