Hydrothermal carbonization (HTC) is an attractive, green technology for the management of sewage sludge. In this study, low-value secondary sewage sludge was subjected to an HTC treatment in a 1 L batch hydrothermal reactor and transformed into a high-energy-density hydrochar under varying HTC conditions (temperature of 150–300 °C, carbonization time of 30–150 min and a solid loading of 10–30%). The resulting hydrochar fuel characteristics were analyzed for ultimate and proximate analyses, functional group composition and energetic parameters. It was found that the hydrochar yield decreased with the increasing HTC temperature and reaction time, primarily due to the loss of organic volatile matter and functional groups. Under the optimum conditions of 150 °C, 30 min of carbonization time and 30% solid loading, 80.56% of the hydrochar was recovered, providing a maximum energy yield of 90.32% and a high heating value of 18.49 MJ/kg. Compared to the raw sewage sludge (H/C ratio of 2.67 and O/C ratio of 0.51), the hydrochar also had lower H/C and O/C atomic ratios of 1.42 and 0.18, respectively. The results suggest that significant dehydration and decarboxylation during the HTC treatment of sewage sludge have resulted in the formation of carbonaceous hydrochar with energetic properties close to the sub-bituminous coals.
Conventionally, nitrification in biological nitrogen removal (BNR) requires high dissolved oxygen (DO) concentrations (>2 mg L−1), making the process energy intensive. Recent studies have shown that efficient ammonium removal and energy reduction can be realized by operating the nitrification at low DO concentrations (<1 mg L−1). In this study, the low-DO oxic anoxic (low-DO OA) process was operated in a pilot-scale sequencing batch reactor (SBR) over 218 days to evaluate the feasibility of nitrogen removal from low chemical oxygen demand-to-nitrogen ratio (COD/N) tropical municipal wastewater. The results revealed that the low-DO OA process attained high removal efficiency for ammonium (97%) and total nitrogen (TN) (80%) under an average DO concentration of 0.6 mg L−1. The effective TN removal efficiency is attributed to the occurrence of simultaneous nitrification–denitrification (SND) under low DO conditions. Further batch tests revealed that slowly biodegradable COD (sbCOD) in tropical wastewater can support denitrification in the post-anoxic phase, resulting in a high TN removal rate. Compared with high DO concentrations (2 mg L−1), low DO conditions achieved 10% higher TN removal efficiency, with similar ammonium and COD removal efficiency. This study is crucial in promoting the energy efficiency and sustainability of wastewater treatment plants treating low COD/N wastewater.
2 July 2025 in Journal of Environmental Chemical Engineering
Background: Wastewater-based surveillance (WBS) has emerged as a valuable tool for population-level monitoring of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) transmission, yet the interplay between sampling strategies and disease prevalence in shaping detection performance remains ambiguous. We investigated how grab and composite sampling influence SARS-CoV-2 ribonucleic acid (RNA) detection dynamics and predictive lag times across high- and low-prevalence communities in Selangor, Malaysia. Methods: A 28-week longitudinal study was conducted in Selangor, Malaysia, comparing grab and composite wastewater sampling in communities with high and low Coronavirus disease 2019 (COVID-19) prevalence. SARS-CoV-2 RNA in 348 samples was quantified using digital Reverse Transcription Polymerase Chain Reaction (RT-dPCR), and viral lineages were characterized by Nanopore sequencing. Detection sensitivity and lead times relative to reported cases were evaluated. Results: In low-prevalence settings, grab sampling showed higher detection sensitivity than composite sampling (92.0% vs. 70.0%), whereas both methods achieved similarly high detection in high-prevalence areas (>97.0%). Lag-time analysis indicated that grab sampling in high-prevalence settings was significantly associated with case trends at potential two-week lead (p = 0.024), while composite sampling in low-prevalence settings showed the strongest association at a potential one-week lead (p = 0.0022). Overall, lag structures varied by both sampling strategy and prevalence context. Both sampling approaches captured the replacement of Omicron sublineages (XBB.1.5, XBB.1.9.1, XBB.1.16) and identified additional circulating variants, including EG.5, that were not captured in the available clinical sequencing dataset during the same period. Conclusions: These findings reveal that local transmission intensity is associated with the utility of different sampling designs. Context-specific optimization of WBS sampling strategies enhances sensitivity, reduces detection lag, and strengthens early warning and genomic-tracking capacity in public health surveillance frameworks.