Amin Akhnoukh

Prof. Amin Akhnoukh

East Carolina University, Greenville, North Carolina, USA

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 March 2019 in Particulate Science and Technology
Verified
Journal Article
Closed access
Amin AkhnoukhAmin Akhnoukh
Amin Akhnoukh
The main objective of this research is to increase the concrete durability by reducing deleterious alkali-silica reactivity (ASR) which results in a substantial damage to concrete members due to induced internal stresses. ASR reaction is initiated when the silica content of the aggregate reacts with Alkali Hydroxide in the mix in the presence of relatively high moisture content. The expansive ASR reaction results in the formation of an expansive gel-like material which induces destructive internal stresses within hardened concrete. In this research, micro and nano-sized supplementary cementitious materials (SCMs) are used in producing concrete with potential ASR reactivity. The micro and nano-sized particles resulted in a reduced air content and smaller void ratio of the produced concrete. The reduced concrete voids resulted in a lower permeability; hence, reduced water content, for the produced concrete, which resulted in a substantial reduction in ASR reaction. Results showed that the reduced ASR reaction is directly correlated to the fineness of the incorporated particles. The outcomes of this research will help to maintain the conditions of ASR prone highway construction projects and reduce the maintenance, repair, and replacement budgets required for the highways network.

15 November 2018
Verified
Conference Paper
Closed access
JEJ. Edmunson
J. Edmunson
MFM. R. Fiske
M. R. Fiske
RMR. P. Mueller
R. P. Mueller
HAHunain Alkhateb
Hunain Alkhateb
Amin AkhnoukhAmin Akhnoukh
Amin Akhnoukh
MJM. M. Johnston
M. M. Johnston
The National Aeronautics and Space Administration’s additive construction with mobile emplacement (ACME) project is developing construction materials with which infrastructure elements, including habitats, will be additively constructed for planetary surface missions. These materials must meet requirements such as the ability to be produced from available in situ resources to eliminate the cost of launching materials from Earth, the ability to be emplaced via three dimensional building techniques, the ability to resist aging in extreme environments including radiation and micrometeorite bombardment, and the ability to provide the necessary structural integrity for a given building. This paper reviews the constraints placed on such planetary construction materials and details the work of the ACME team in characterizing materials that could one day construct planetary surface structures on Mars or the Moon. Material compositions, compressive strength, and requirements for additive construction on planetary surfaces are discussed. Due to the multifunctional requirements of the material, an optimization is necessary to balance between the site-specific regolith composition, emplacement via additive construction techniques, and characteristics of the final structure.

8 August 2018
Verified
Conference Paper
Closed access
CXChao Xiao
Chao Xiao
YLYang Liu
Yang Liu
Amin AkhnoukhAmin Akhnoukh
Amin Akhnoukh
The use of artificial intelligent (AI) has increased in the field of construction engineering and management in recent years, mostly due to the potential of the technology for improving construction performance and efficiency. In order to achieving a comprehensive understanding of the research work on this subject, this paper conducted a bibliometric analysis and review of existing literature on AI focusing on the last decade. The authors selected the articles based on different categories of AI technology and published journals with an impact factor higher than 1.0. The search resulted in 273 articles, which were then categorized in order to systematize the research conducted over the years. The authors analyzed the selected articles from the perspectives of time the article was published, journals, research fields in construction domain, high productive researchers, and major AI techniques. In addition, this review concluded the current trends of AI application in construction and further identified the next step of a detailed systematic analysis of the selected literature from the perspective of its research fields in construction domain to come up with more meaningful results that could bright the future usage of AI in construction related research.

1 June 2023 in Construction Materials
Verified
Journal Article
Open access
PDF file
Amin AkhnoukhAmin Akhnoukh
Amin Akhnoukh
Alkali–silica reactivity (ASR) is one of multiple reactions responsible for premature loss in concrete infrastructure service life. ASR results in the formation of expansive, white-colored gel-like material which results in internal stresses within hardened concrete. ASR-induced stresses result in concrete cracking, spalling, and increased reinforcement steel corrosion rates. The main objective of this research is to improve the conditions of concrete infrastructure projects by mitigating ASR’s damaging effect. The expansion of accelerated mortar bars poured using fine aggregates collected from different sources is measured versus time to evaluate the aggregates’ reactivity. Different percentages of supplementary cementitious materials (SCMs), including class C fly ash and microsilica, were used in remixing mortar bars to evaluate the efficiency of different types of SCMs in mitigating mortar bar expansion. The research findings showed that SCMs can mitigate ASR, thus decreasing mortar bar expansion. The efficiency of SCMs in ASR mitigation is highly dependent on the incorporated SCM percentage and particle fineness. Silica fume, having the smallest particle size, displayed higher rates of ASR mitigation, followed by fly ash. The outcomes of this research will assist design engineers in avoiding future losses due to ASR cracking in concrete infrastructure projects, and reduce the excessive need for maintenance, repair, and replacement activities.

26 May 2023 in CivilEng
Verified
Journal Article
Open access
PDF file
Amin AkhnoukhAmin Akhnoukh
Amin Akhnoukh
AFAhmed Fady Farid
Ahmed Fady Farid
AHAhmed M. M. Hasan
Ahmed M. M. Hasan
YRYoussef F. Rashed
Youssef F. Rashed
Magneto-rheological dampers (MR-Dampers) are increasingly being used in construction applications to reduce the dynamic response of structures to seismic activities or severe wind loading. Sensors attached to the structure will signal the computer to supply the dampers with an electric charge that transfers the MR fluid to a near-solid material with different physical and mechanical properties (viscoelastic behavior). Control algorithms govern the fluid to near-solid conversion, which controls the behavior of the damper and the performance of the structure under the seismic or wind loading event. The successful optimization of control parameters minimizes the overall structural response to dynamic forces. The main objective of this research is to change the output behavior of specific floors within a building subjected to seismic excitation by optimizing the MR-Damper control parameters to impact the behavior of a specific floor or number of floors within the building. The adjustment of control parameters to attain this objective was validated in multiple case studies throughout this research. The successful implementation of the research outcome will result in optimized MR-damper design to meet the performance-based criteria of building projects.

4 May 2022
Verified
Book Chapter
Open access
PDF file
Amin AkhnoukhAmin Akhnoukh
Amin Akhnoukh
Supplementary cementitious materials (SCMs) are increasingly incorporated into the concrete mix design. Silica fume, fly ash, and multi-wall carbon nanotubes are used to improve concrete mix properties. The objective of this chapter is to decipher the impact of different SCMs on the fresh and hardened concrete properties, including concrete flowing ability, initial strength, final strength, modulus of elasticity, and modulus of rupture. In addition, the impact of SCMs on mitigating the alkali-silica reactivity of concrete and increasing the hardened concrete long-term performance is investigated. Developed concrete mixes, incorporating SCMs, are used in fabricating different precast/prestressed bridge girders. The impact of improved concrete properties on precast girder performance in increased flexure, shear, and span-to-depth ratio significantly improves project sustainability and reduces the overall project life cycle cost.