To address the integrated demands of structural reinforcement and energy-efficient retrofitting for existing buildings, a cementitious material modified with vitrified microspheres and SiO2 aerogel was developed to realize the synergistic enhancement of thermal insulation and mechanical strength. By substituting fine sand with equal mass fractions of SiO2 aerogel and vitrified microspheres in the cement matrix, this study systematically investigated the synergistic regulatory effects of this binary modification on two core performance metrics—thermal conductivity and compressive strength. All performance tests were conducted in triplicate, and the results are presented as the mean values. The results indicated that the thermal conductivity of the composite exhibited a trend of decreasing first and then increasing with the rise in aerogel content. At an aerogel dosage of 6%, the thermal conductivity dropped to 0.2237 W/(m·K), achieving optimal thermal insulation performance while retaining a compressive strength of 17.96 MPa. The subsequent incorporation of 15% vitrified microspheres further reduced the thermal conductivity to 0.1642 W/(m·K) while maintaining a compressive strength of 15.34 MPa, thereby achieving an optimal balance between thermal insulation and mechanical performance. Microstructural characterization revealed that the incorporation of aerogel significantly increased the internal porosity of the composite, effectively reducing thermal conductivity by obstructing heat transfer pathways. Vitrified microspheres enhance thermal resistance via their closed-cell structure and promote the formation and densification of C-S-H gel. Synergistically with SiO2 aerogel, they construct a multi-scale porous composite system. By optimizing the interfacial bonding state and pore structure, this system achieves the synergistic optimization of mechanical strength and thermal insulation of cement-based composites, providing new materials and a theoretical basis for the functional integrated retrofitting of existing building structures.
Considering the adverse effects of the multi-point input of large-span spatial structure, the SMA damper bar was designed to replace original bars in the structure. In this paper, there were two projects to replace SMA damper bars, one was replaced of some lower chord's bars, The other was replaced of some web bars,and the effects of this two replacement situations were compared. The analysis has indicated that the lattice type was not changed and the reasonable control was done with this method. So it was a new and superior method of energy dissipation.
An inversion algorithms was suggested for array induction logging curves. Three parameters, true-formation resistivity, invasion depth and invasion-zone resistivity, were obtained simultaneously from the present inversion calculation using various forward algorithms. The inversed algorithm using numerical mode-matching method as forward calculation can yield stable and satisfied results. The inversion using geometry factor theory as forward calculation can save more computer time. Synthetic formation models and site applications illustrated the efficiency of the present algorithm.