Concrete-filled steel tubular (CFST) columns are widely used in engineering structures, and they have many different cross section types. Among these, normal solid sections and concrete-filled double-skin steel tubular sections are often used. Although many studies have been conducted on CFST columns with these two section types, no studies have been conducted on their damage assessment under blast loading. In this study, experimental analysis and a numerical simulation method were integrated to evaluate the responses and assess the damage of two concrete-filled steel tubular (CFST) columns with different cross sections subjected to near-field blast loading. The results showed that for a scaled distance of 0.14m/kg1/3, plastic bending deformation occurred on the surfaces of the two CFST columns facing the explosive. The antiexplosion performance of the normal solid-section (NSS) CFST column was better than that of the concrete-filled double-skin steel tubular (CFDST) column. The explosion centre was set at the same height as the middle of column, and the distributions of the peak pressure values of the two columns were similar: the peak pressures at the middle points of the columns were the greatest, and the peak pressures at the bottom were higher than those at the top. With the analysis of the duration of the positive pressure, the damage at the middle was the most severe when subjected to blast loading. Using pressure-impulse damage theory and the validated numerical simulations, two pressure-impulse damage evaluation curves for NSS and CFDST columns were established separately by analysing the experimental and simulation data. Finally, based on the two pressure-impulse damage evaluation curves, the two pressure-impulse damage criteria for these two different fixed-end CFST columns were defined based on the deflection of the surfaces facing the explosives. Furthermore, the mathematical formulae for the two different column types were established to generate pressure-impulse diagrams. With the established formulae, the damage of the CFST columns with these two cross section types can be evaluated. Damage to other similar CFST columns with different cross section types due to near-field blast loading can also be evaluated by this method.
Affected by climate warming and anthropogenic disturbances, the thermo-mechanical stability of warm and ice-rich frozen ground along the Qinghai–Tibet Railway (QTR) is continuously decreasing, and melting subsidence damage to existing warm frozen soil (WFS) embankments is constantly occurring, thus seriously affecting the stability and safety of the existing WFS embankments. In this study, in order to solve the problems associated with the melting settlement of existing WFS embankments, a novel reinforcement technology for ground improvement, called an inclined soil–cement continuous mixing wall (ISCW), is proposed to reinforce embankments in warm and ice-rich permafrost regions. A numerical simulation of a finite element model was conducted to study the freeze–thaw process and evaluate the stabilization effects of the ISCW on an existing WFS embankment of the QTR. The numerical investigations revealed that the ISCW can efficiently reduce the melt settlement in the existing WFS embankment, as well as increase the bearing capacity of the existing WFS embankment, making it favorable for improving the bearing ability of composite foundations. The present investigation breaks through the traditional ideas of “active cooling” and “passive protection” and provides valuable guidelines for the choice of engineering supporting techniques to stabilize existing WFS embankments along the QTR.
To address the integrated demands of structural reinforcement and energy-efficient retrofitting for existing buildings, a cementitious material modified with vitrified microspheres and SiO2 aerogel was developed to realize the synergistic enhancement of thermal insulation and mechanical strength. By substituting fine sand with equal mass fractions of SiO2 aerogel and vitrified microspheres in the cement matrix, this study systematically investigated the synergistic regulatory effects of this binary modification on two core performance metrics—thermal conductivity and compressive strength. All performance tests were conducted in triplicate, and the results are presented as the mean values. The results indicated that the thermal conductivity of the composite exhibited a trend of decreasing first and then increasing with the rise in aerogel content. At an aerogel dosage of 6%, the thermal conductivity dropped to 0.2237 W/(m·K), achieving optimal thermal insulation performance while retaining a compressive strength of 17.96 MPa. The subsequent incorporation of 15% vitrified microspheres further reduced the thermal conductivity to 0.1642 W/(m·K) while maintaining a compressive strength of 15.34 MPa, thereby achieving an optimal balance between thermal insulation and mechanical performance. Microstructural characterization revealed that the incorporation of aerogel significantly increased the internal porosity of the composite, effectively reducing thermal conductivity by obstructing heat transfer pathways. Vitrified microspheres enhance thermal resistance via their closed-cell structure and promote the formation and densification of C-S-H gel. Synergistically with SiO2 aerogel, they construct a multi-scale porous composite system. By optimizing the interfacial bonding state and pore structure, this system achieves the synergistic optimization of mechanical strength and thermal insulation of cement-based composites, providing new materials and a theoretical basis for the functional integrated retrofitting of existing building structures.