Erika Fekete

Dr. Erika Fekete

Institute of Materials and Environmental Chemistry, Budapest, Hungary
orcid

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 September 2021 in Polymers
Verified
Journal Article
Open access
PDF file
DKDavid Kun
David Kun
ZKZoltán Kárpáti
Zoltán Kárpáti
EFErika Fekete
Erika Fekete
JMJános Móczó
János Móczó
This paper presents a comprehensive study about the application of a lignocellulosic agricultural waste, sunflower husk in different polymer composites. Two types of milled sunflower husk with different geometrical factors were incorporated into polypropylene, low-density and high-density polyethylene, polystyrene (PS), glycol-modified polyethylene terephthalate (PETG) and polylactic acid (PLA). The filler content of the composites varied between 0 and 60 vol%. The components were homogenized in an internal mixer and plates were compression molded for testing. The Lewis–Nielsen model was fitted to the moduli of each composite series, and it was found that the physical contact of the filler particles is a limiting factor of composite modulus. Interfacial interactions were estimated from two independent approaches. Firstly, the extent of reinforcement was determined from the composition dependence of tensile strength. Secondly, the reversible work of adhesion was calculated from the surface energies of the components. As only weak van der Waals interactions develop in the interphase of polyolefins and sunflower husk particles, adhesion is weak in their composites resulting in poor reinforcement. Interfacial adhesion enhanced by specific interactions in the interphase, such as π electron interactions for PS, hydrogen bonds for PLA, and both for PETG based composites.

1 September 2021 in Polymer Testing
Verified
Journal Article
Open access
BBBence Balla
Bence Balla
ABAndrás Bartos
András Bartos
DKDávid Kun
Dávid Kun
ECEmília Csiszár
Emília Csiszár
JMJános Móczó
János Móczó
EFErika Fekete
Erika Fekete

20 September 2021 in Polymers
Verified
Journal Article
Open access
PDF file
ECEmília Csiszár
Emília Csiszár
DKDávid Kun
Dávid Kun
EFErika Fekete
Erika Fekete
Composite films were fabricated by using cellulose nanocrystals (CNCs) as reinforcement up to 50 wt% in thermoplastic starch (TPS). Structure and interactions were modified by using different types (glycerol and sorbitol) and different amounts (30 and 40%) of plasticizers. The structure of the composites was characterized by visible spectroscopy, Haze index measurements, and scanning electron microscopy. Tensile properties were determined by tensile testing, and the effect of CNC content on vapor permeability was investigated. Although all composite films are transparent and can hardly be distinguished by human eyes, the addition of CNCs somewhat decreases the transmittance of the films. This can be related to the increased light scattering of the films, which is caused by the aggregation of nanocrystals, leading to the formation of micron-sized particles. Nevertheless, strength is enhanced by CNCs, mostly in the composite series prepared with 30% sorbitol. Additionally, the relatively high water vapor permeability of TPS is considerably decreased by the incorporation of at least 20 wt% CNCs. Reinforcement is determined mostly by the competitive interactions among starch, nanocellulose, and plasticizer molecules. The aging of the films is caused by the additional water uptake from the atmosphere and the retrogradation of starch.

29 March 2023 in Polymers
Verified
Journal Article
Open access
PDF file
ECEmília Csiszár
Emília Csiszár
IHImola Herceg
Imola Herceg
EFErika Fekete
Erika Fekete
Cellulose nanocrystals (CNCs) were extracted from bleached cotton by sulfuric acid hydrolysis. Thin films were prepared from the aqueous suspension of CNCs by casting and evaporation with 15% glycerol as a plasticizer. Our research aimed to create stable films resistant to water. The structure and the interactions of the films were modified by short (10 min) heating at different temperatures (100, 140, and 160 °C) and by adding different amounts of citric acid (0, 10, 20, and 30%). Various analytical methods were used to determine the structure, surface properties, and mechanical properties. The interaction of composite films with water and water vapor was also investigated. Heat treatment did not significantly affect the film properties. Citric acid, without heat treatment, acted as a plasticizer. It promoted the disintegration of films in water, increased water vapor sorption, and reduced tensile strength, resulting in flexible and easy-to-handle films. The combination of heat treatment and citric acid resulted in stable liquid-water-resistant films with excellent mechanical properties. A minimum heating temperature of 120 °C and a citric acid concentration of 20% were required to obtain a stable CNC film structure resistant to liquid water.

28 January 2010 in Textile Research Journal
Verified
Journal Article
Closed access
ECEmília Csiszár
Emília Csiszár
EFErika Fekete
Erika Fekete
Inverse gas chromatography (IGC) has been successfully used for comparative characterization of the surface properties of alkaline-scoured and bioscoured cotton samples in fibrous form. Under appropriate standard conditions the dispersion component (γ sd) of surface tension and the electron-acceptor ( KA) and electron-donor ( KD) constants were determined for characterizing the surface properties of raw, alkaline-scoured and pectinase-scoured cotton. The dispersion component of surface tension increased slightly with increasing hydrophilicity of the surfaces (raw: 39.0 mJ/m2, bioscoured: 40.0 mJ/m2 , alkaline scoured: 41.7 mJ/m2, at 30°C), indicating that the wax removal that occurred is somewhat higher in alkaline scouring than in bioscouring. The γ sd values decreased continuously with increasing measurement temperature in the range of 30—70°C (raw: 32.0 mJ/m2, bioscoured: 33.2 mJ/m2, alkaline scoured: 35.9 mJ/m2, at 70°C). Polar probes were not retained on raw cotton at all. The surface of the alkaline-scoured and bioscoured cotton samples was predominantly basic in character: KD /KA 6.8 and 8.2, respectively, where KA and KD were calculated from the Δ GA ab at 30°C. Despite the weight loss difference (3.2% and 0.7% for alkaline and bioscouring, respectively) and the residual pectin in bioscoured cotton, the results show that the acid—base character of the surface of the alkaline and pectinase-scoured samples is very similar.

Verified
Journal Article
Open access
PDF file
EFErika Fekete
Erika Fekete
ECEmília Csiszár
Emília Csiszár
Chitosan, alginate, and chitosan–alginate (50:50) mixed hydrogels were prepared by freeze casting, freeze-drying, and subsequent physical cross-linking. Chitosan was cross-linked with citrate and alginate with calcium ions, while the mixed gels were cross-linked with both cross-linking agents. Both cryogels and xerogels were obtained by lyophilization and drying of the hydrogels. We investigated the effect of the chemical composition and the physical state of gels on the gel structure and sorption of model dyes. Alginate and mixed gels cross-linked with Ca2+ ions sorbed 80–95% of cationic dye from the solutions. The chitosan gels are primarily capable of adsorbing anionic dyes, but at near-neutral pH, their capacity is lower than that of alginate gels, showing 50–60% dye sorption. In the case of alginate gels, the dye sorption capacity of xerogels, cryogels, and hydrogels was the same, but for chitosan gels, the hydrogels adsorbed slightly less dye than the dried gels.