Composite films were fabricated by using cellulose nanocrystals (CNCs) as reinforcement up to 50 wt% in thermoplastic starch (TPS). Structure and interactions were modified by using different types (glycerol and sorbitol) and different amounts (30 and 40%) of plasticizers. The structure of the composites was characterized by visible spectroscopy, Haze index measurements, and scanning electron microscopy. Tensile properties were determined by tensile testing, and the effect of CNC content on vapor permeability was investigated. Although all composite films are transparent and can hardly be distinguished by human eyes, the addition of CNCs somewhat decreases the transmittance of the films. This can be related to the increased light scattering of the films, which is caused by the aggregation of nanocrystals, leading to the formation of micron-sized particles. Nevertheless, strength is enhanced by CNCs, mostly in the composite series prepared with 30% sorbitol. Additionally, the relatively high water vapor permeability of TPS is considerably decreased by the incorporation of at least 20 wt% CNCs. Reinforcement is determined mostly by the competitive interactions among starch, nanocellulose, and plasticizer molecules. The aging of the films is caused by the additional water uptake from the atmosphere and the retrogradation of starch.
Wood modification is an excellent and increasingly used method to expand the application of woody materials. Traditional methods, such as chemical or thermal, have been developed for the targeted improvement of some selected properties, unfortunately typically at the expense of others. These methods generally alter the composition of wood, and thus its mechanical properties, and enhance dimensional stability, water resistance, or decrease its susceptibility to microorganisms. Although conventional methods achieve the desired properties, they require a lot of energy and chemicals, therefore research is increasingly moving towards more environmentally friendly processes. The advantage of modern methods is that in most cases, they only modify the surface and do not affect the structure and mechanical properties of the wood, while reducing the amount of chemicals used. Cold plasma surface treatment is one of the cheapest and easiest technologies with a limited burden on the environment. In this review, we focus on cold plasma treatment, the interaction between plasma and wood compounds, the advantages of plasma treatment compared to traditional methods, and perspectives.
Cellulose nanocrystals (CNCs) were extracted from bleached cotton by sulfuric acid hydrolysis. Thin films were prepared from the aqueous suspension of CNCs by casting and evaporation with 15% glycerol as a plasticizer. Our research aimed to create stable films resistant to water. The structure and the interactions of the films were modified by short (10 min) heating at different temperatures (100, 140, and 160 °C) and by adding different amounts of citric acid (0, 10, 20, and 30%). Various analytical methods were used to determine the structure, surface properties, and mechanical properties. The interaction of composite films with water and water vapor was also investigated. Heat treatment did not significantly affect the film properties. Citric acid, without heat treatment, acted as a plasticizer. It promoted the disintegration of films in water, increased water vapor sorption, and reduced tensile strength, resulting in flexible and easy-to-handle films. The combination of heat treatment and citric acid resulted in stable liquid-water-resistant films with excellent mechanical properties. A minimum heating temperature of 120 °C and a citric acid concentration of 20% were required to obtain a stable CNC film structure resistant to liquid water.
The contribution of ultrasound-aided particle size reduction to the efficiency of the subsequent enzymatic hydrolysis and the accompanying morphological changes of bleached cotton and linen powders were investigated. The aqueous suspensions of cellulosic powders were pretreated either with an ultrasonic bath (US-B) or with a horn-type reactor (US-H). Results revealed that the impact of US-H was more pronounced than that of the US-B. Clearly, the linen particles were more sensitive to ultrasonication than cotton. The US-H modified the particle size distribution differently for the cotton and linen powders and reduced the mean size of particles from 49 to 40 µm and from 123 to 63 µm, respectively. A significant increase in the water retention and water sorption capacity was also measured. The smaller particles with increased accessibility were preferably digested in the enzyme treatment, resulting in a considerably higher concentration of reducing sugars and an enrichment of the residual particles with a larger average size (cotton: 47 µm; linen: 66 µm).
Chitosan, alginate, and chitosan–alginate (50:50) mixed hydrogels were prepared by freeze casting, freeze-drying, and subsequent physical cross-linking. Chitosan was cross-linked with citrate and alginate with calcium ions, while the mixed gels were cross-linked with both cross-linking agents. Both cryogels and xerogels were obtained by lyophilization and drying of the hydrogels. We investigated the effect of the chemical composition and the physical state of gels on the gel structure and sorption of model dyes. Alginate and mixed gels cross-linked with Ca2+ ions sorbed 80–95% of cationic dye from the solutions. The chitosan gels are primarily capable of adsorbing anionic dyes, but at near-neutral pH, their capacity is lower than that of alginate gels, showing 50–60% dye sorption. In the case of alginate gels, the dye sorption capacity of xerogels, cryogels, and hydrogels was the same, but for chitosan gels, the hydrogels adsorbed slightly less dye than the dried gels.
In this research, different clays such as laponite and montmorillonite (NaMMT) are used as fillers in the preparation of thermoplastic starch/clay nanocomposites. Thin films are produced by casting and evaporation in a wide composition range, using glycerol as the plasticizer at two different concentrations. The surface energy of clay fillers is measured by inverse gas chromatography (IGC); X-ray diffraction (XRD) and light transmission measurements (UV-VIS) are carried out to characterize the structure of nanocomposites; and mechanical properties and water vapor permeability are also studied. While all the starch/montmorillonite nanocomposites possess intercalated structures, significant exfoliation can be noted in the starch/laponite nanocomposites, mainly at low clay contents. Due to the larger surface energy of montmorillonite, stronger polymer/clay interactions and better mechanical properties can be assumed in starch/NaMMT composites. The smaller surface energy of laponite, however, can facilitate the delamination of laponite layers. Thus, the specific surface area of laponite can be further increased by exfoliation. Based on the results, the better exfoliation and the much larger specific surface area of laponite lead to higher reinforcement in starch/laponite nanocomposites.