Satellite data provide the only viable means for extensive monitoring of remote and large freshwater systems, such as the Amazon floodplain lakes. However, an accurate atmospheric correction is required to retrieve water constituents based on surface water reflectance ( ${\mathrm{R}}_{\mathrm{W}}$ ). In this paper, we assessed three atmospheric correction methods (Second Simulation of a Satellite Signal in the Solar Spectrum (6SV), ACOLITE and Sen2Cor) applied to an image acquired by the MultiSpectral Instrument (MSI) on-board of the European Space Agency’s Sentinel-2A platform using concurrent in-situ measurements over four Amazon floodplain lakes in Brazil. In addition, we evaluated the correction of forest adjacency effects based on the linear spectral unmixing model, and performed a temporal evaluation of atmospheric constituents from Multi-Angle Implementation of Atmospheric Correction (MAIAC) products. The validation of MAIAC aerosol optical depth (AOD) indicated satisfactory retrievals over the Amazon region, with a correlation coefficient (R) of ~0.7 and 0.85 for Terra and Aqua products, respectively. The seasonal distribution of the cloud cover and AOD revealed a contrast between the first and second half of the year in the study area. Furthermore, simulation of top-of-atmosphere (TOA) reflectance showed a critical contribution of atmospheric effects (>50%) to all spectral bands, especially the deep blue (92%–96%) and blue (84%–92%) bands. The atmospheric correction results of the visible bands illustrate the limitation of the methods over dark lakes ( ${\mathrm{R}}_{\mathrm{W}}$ < 1%), and better match of the ${\mathrm{R}}_{\mathrm{W}}$ shape compared with in-situ measurements over turbid lakes, although the accuracy varied depending on the spectral bands and methods. Particularly above 705 nm, ${\mathrm{R}}_{\mathrm{W}}$ was highly affected by Amazon forest adjacency, and the proposed adjacency effect correction minimized the spectral distortions in ${\mathrm{R}}_{\mathrm{W}}$ (RMSE < 0.006). Finally, an extensive validation of the methods is required for distinct inland water types and atmospheric conditions.

Chlorophyll-a (chl-a) is a central water quality parameter that has been estimated through remote sensing bio-optical models. This work evaluated the performance of three well established reflectance based bio-optical algorithms to retrieve chl-a from in situ hyperspectral remote sensing reflectance datasets collected during three field campaigns in the Funil reservoir (Rio de Janeiro, Brazil). A Monte Carlo simulation was applied for all the algorithms to achieve the best calibration. The Normalized Difference Chlorophyll Index (NDCI) got the lowest error (17.85%). The in situ hyperspectral dataset was used to simulate the Ocean Land Color Instrument (OLCI) spectral bands by applying its spectral response function. Therefore, we evaluated its applicability to monitor water quality in tropical turbid inland waters using algorithms developed for MEdium Resolution Imaging Spectrometer (MERIS) data. The application of OLCI simulated spectral bands to the algorithms generated results similar to the in situ hyperspectral: an error of 17.64% was found for NDCI. Thus, OLCI data will be suitable for inland water quality monitoring using MERIS reflectance based bio-optical algorithms.

Satellite remote sensing data have been used for water quality mapping, but accurate water reflectance retrieval is dependent on multiple procedures, such as atmospheric and adjacency corrections. For the latter, physical-based methods are used to minimize the adjacency effects caused by neighboring land targets close to water pixels, and implementation requires atmospheric and environmental parameters, such as aerosol optical depth and horizontal range (i.e., distance in meters) of the adjacency effect (${\mathrm{H}}_{\mathrm{Adj}}$). Generally, the ${\mathrm{H}}_{\mathrm{Adj}}$ is empirically defined by users and can lead to substantial errors in water reflectance when incorrectly used. In this research, a physical-based approach with three empirical methods to determine the ${\mathrm{H}}_{\mathrm{Adj}}$ (fixed, SIMilarity Environment Correction—SIMEC, and Adaptative Window by Proportion—AWP-Inland Water) were used to correct and characterize the adjacency effects in Sentinel-2 images over Brazilian inland waters. An interactive inversion method of the deep blue waveband estimated the aerosol loading for the atmospheric correction procedure. The results of atmospheric and adjacency corrections were validated against in-situ reflectance data. The inverted aerosol loading achieved a good agreement with in-situ measurements, especially at visible wavelengths (Mean Absolute Percentage Error—MAPE for eutrophic (~56%), bright (~80%), and dark (~288%) waters). The adjacency correction performance was near similar between the SIMEC and AWP-Inland Water methods in eutrophic and bright waters (MAPE difference < 3%). However, only the AWP-Inland Water method provided a smaller error (MAPE ~53%) for dark waters compared to the fixed (~108%) and SIMEC (~289%) methods, which shows how critical ${\mathrm{H}}_{\mathrm{Adj}}$ parametrization is for low water reflectance values. Simulations of different atmospheric and adjacency effects were performed, and they highlighted the importance of adjacency correction under aerosol loading higher 0.1, which is a typical aerosol loading in a dry climate season, and over extremely dark, low-reflectance waters. This paper contributes to further understanding adjacency effects in medium spatial resolution imagery of inland waters using a physical-based approach including the uncertainties in ${\mathrm{H}}_{\mathrm{Adj}}$ determination.

Due to increasing algae bloom occurrence and water degradation on a global scale, there is a demand for water quality monitoring systems based on remote sensing imagery. This paper describes the scientific, theoretical, and methodological background for creating a cloud-computing interface on Google Earth Engine (GEE) which allows end-users to access algae bloom related products with high spatial (30 m) and temporal (~5 day) resolution. The proposed methodology uses Sentinel-2 images corrected for atmospheric and sun-glint effects to generate an image collection of the Normalized Difference Chlorophyll-a Index (NDCI) for the entire time-series. NDCI is used to estimate both Chl-a concentration, based on a non-linear fitting model, and Trophic State Index (TSI), based on a tree-decision model classification into five classes. Once the Chl-a and TSI algorithms had been calibrated and validated they were implemented in GEE as an Earth Engine App, entitled Algae Bloom Monitoring Application (AlgaeMAp). AlgaeMAp is the first online platform built within the GEE platform that offers high spatial resolution of water quality parameters. The App benefits from the huge processing capability of GEE that allows any user with internet access to easily extract detailed spatial (30 m) and long temporal Chl-a and TSI information (from August 2015 and with images every 5 days) throughout the most important reservoirs in the State of São Paulo/Brazil. The application will be adapted to extend to other relevant areas in Latin America.

Uncertainties in the estimates of water constituents are among the main issues concerning the orbital remote sensing of inland waters. Those uncertainties result from sensor design, atmosphere correction, model equations, and in situ conditions (cloud cover, lake size/shape, and adjacency effects). In the Amazon floodplain lakes, such uncertainties are amplified due to their seasonal dynamic. Therefore, it is imperative to understand the suitability of a sensor to cope with them and assess their impact on the algorithms for the retrieval of constituents. The objective of this paper is to assess the impact of the SNR on the Chl-a and TSS algorithms in four lakes located at Mamirauá Sustainable Development Reserve (Amazonia, Brazil). Two data sets were simulated (noisy and noiseless spectra) based on in situ measurements and on sensor design (MSI/Sentinel-2, OLCI/Sentinel-3, and OLI/Landsat 8). The dataset was tested using three and four algorithms for TSS and Chl-a, respectively. The results showed that the impact of the SNR on each algorithm displayed similar patterns for both constituents. For additive and single band algorithms, the error amplitude is constant for the entire concentration range. However, for multiplicative algorithms, the error changes according to the model equation and the R_rs magnitude. Lastly, for the exponential algorithm, the retrieval amplitude is higher for a low concentration. The OLCI sensor has the best retrieval performance (error of up to 2 μg/L for Chl-a and 3 mg/L for TSS). For MSI, the error of the additive and single band algorithms for TSS and Chl-a are low (up to 5 mg/L and 1 μg/L, respectively); but for the multiplicative algorithm, the errors were above 10 μg/L. The OLI simulation resulted in errors below 3 mg/L for TSS. However, the number and position of OLI bands restrict Chl-a retrieval. Sensor and algorithm selection need a comprehensive analysis of key factors such as sensor design, in situ conditions, water brightness (R_rs), and model equations before being applied for inland water studies.

Remote sensing imagery are fundamental to increasing the knowledge about sediment dynamics in the middle-lower Amazon floodplains. Moreover, they can help to understand both how climate change and how land use and land cover changes impact the sediment exchange between the Amazon River and floodplain lakes in this important and complex ecosystem. This study investigates the suitability of Landsat-8 and Sentinel-2 spectral characteristics in retrieving total (TSS) and inorganic (TSI) suspended sediments on a set of Amazon floodplain lakes in the middle-lower Amazon basin using in situ Remote Sensing Reflectance (R_rs) measurements to simulate Landsat 8/OLI (Operational Land Imager) and Sentinel 2/MSI (Multispectral Instrument) bands and to calibrate/validate several TSS and TSI empirical algorithms. The calibration was based on the Monte Carlo Simulation carried out for the following datasets: (1) All-Dataset, consisting of all the data acquired during four field campaigns at five lakes spread over the lower Amazon floodplain (n = 94); (2) Campaign-Dataset including samples acquired in a specific hydrograph phase (season) in all lakes. As sample size varied from one season to the other, n varied from 18 to 31; (3) Lake-Dataset including samples acquired in all seasons at a given lake with n also varying from 17 to 67 for each lake. The calibrated models were, then, applied to OLI and MSI scenes acquired in August 2017. The performance of three atmospheric correction algorithms was also assessed for both OLI (6S, ACOLITE, and L8SR) and MSI (6S, ACOLITE, and Sen2Cor) images. The impact of glint correction on atmosphere-corrected image performance was assessed against in situ glint-corrected R_rs measurements. After glint correction, the L8SR and 6S atmospheric correction performed better with the OLI and MSI sensors, respectively (Mean Absolute Percentage Error (MAPE) = 16.68% and 14.38%) considering the entire set of bands. However, for a given single band, different methods have different performances. The validated TSI and TSS satellite estimates showed that both in situ TSI and TSS algorithms provided reliable estimates, having the best results for the green OLI band (561 nm) and MSI red-edge band (705 nm) (MAPE < 21%). Moreover, the findings indicate that the OLI and MSI models provided similar errors, which support the use of both sensors as a virtual constellation for the TSS and TSI estimate over an Amazon floodplain. These results demonstrate the applicability of the calibration/validation techniques developed for the empirical modeling of suspended sediments in lower Amazon floodplain lakes using medium-resolution sensors.