Yue Song

Ms. Yue Song


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 February 2022 in Sensors
Verified
Journal Article
Open access
PDF file
JXJinlin Xue
Jinlin Xue
FCFeng Cheng
Feng Cheng
YLYuqing Li
Yuqing Li
YSYue Song
Yue Song
TMTingting Mao
Tingting Mao
It is necessary to detect multi-type farmland obstacles in real time and accurately for unmanned agricultural vehicles. An improved YOLOv5s algorithm based on the K-Means clustering algorithm and CIoU Loss function was proposed to improve detection precision and speed up real-time detection. The K-Means clustering algorithm was used in order to generate anchor box scales to accelerate the convergence speed of model training. The CIoU Loss function, combining the three geometric measures of overlap area, center distance and aspect ratio, was adopted to reduce the occurrence of missed and false detection and improve detection precision. The experimental results showed that the inference time of a single image was reduced by 75% with the improved YOLOv5s algorithm; compared with that of the Faster R-CNN algorithm, real-time performance was effectively improved. Furthermore, the mAP value of the improved algorithm was increased by 5.80% compared with that of the original YOLOv5s, which indicates that using the CIoU Loss function had an obvious effect on reducing the missed detection and false detection of the original YOLOv5s. Moreover, the detection of small target obstacles of the improved algorithm was better than that of the Faster R-CNN.

25 September 2022 in Agriculture
Verified
Journal Article
Open access
PDF file
XSxiaoxu sun
xiaoxu sun
ZLZhixiong Lu
Zhixiong Lu
YSYue Song
Yue Song
ZCZhun Cheng
Zhun Cheng
CJChunxia Jiang
Chunxia Jiang
YLYang Lu
Yang Lu
A tractor electro-hydraulic hitch system is considered one of the most important systems that play a strategic role in the power transmission and operation depth control of a tractor’s field operation. Its performance directly affects the operation quality of the whole work unit of the tractor. Furthermore, a tractor electro-hydraulic hitch system has gained the interest of many in the agricultural machinery sector because of its stable performance, high production efficiency, good operation quality and its low energy consumption. To fully benefit from the potential of the tractor electro-hydraulic hitch system, it is significant to understand and address the problems and challenges associated with it. This study, therefore, aims to contribute to the development of the tractor electro-hydraulic hitch system by investigating the research methods, technical characteristics and emerging trends in three key aspects that include the tillage depth adjustment method, the tillage depth control algorithm and the core components of the electro-hydraulic hitch system. The characteristics and applicable conditions of the different tillage depth adjustment methods of the electro-hydraulic hitch system were summarized. The realization methods and the control characteristics of the different algorithms were elaborated and discussed for both the PID control algorithm and the intelligent control algorithm. The working characteristics of the core components of the electro-hydraulic hitch system were analyzed based on the hydraulic control valves and sensing elements. The results have shown that the multi-parameter tillage depth adjustment method met the operation quality standard while taking the engine load stability and traction efficiency into account, and it has a greater research significance and value. The working quality can be improved effectively by introducing the intelligent algorithm. In addition, the study of smart valves with built-in sensing elements and how to improve the anti-interference ability of sensing elements, are the aspects that requires further consideration. Aiming to improve the working quality and reduce energy consumption, further research into the tractor electro-hydraulic hitch system is necessary. The results of this comprehensive review provide a reference for the intelligent operation of tractors under the precision agriculture.

18 January 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
GWGuangming Wang
Guangming Wang
YSYue Song
Yue Song
JWJiabo Wang
Jiabo Wang
WCWanqiang Chen
Wanqiang Chen
YCYunlian Cao
Yunlian Cao
JWJinxing Wang
Jinxing Wang
The failure of a hydraulic system will affect the shifting quality and driving safety of a CVT tractor. In order to reveal the response of the tractor under different hydraulic system failures without destroying the transmission, the following methods are proposed in this paper: firstly, building the simulation model of CVT; secondly, building a test bench to test and verify the transmission model to ensure that the simulation model can accurately predict the response of CVT under different clutch oil pressures; thirdly, obtaining the fault oil pressure data without starting the engine and taking the data of fault oil pressure as the input variable of the simulation model; finally, obtaining the response of the CVT tractor under different hydraulic system failures by simulation. It is found that the damage of the seal ring inside the rotary joint has little effect on shifting quality; oil way block can lead to greater shift impact; when seal ring damage and oil way block occur together, the clutch cannot reach the minimum working pressure; clutch piston jamming and oil leak can cause power interruption of the tractor. The results show that it is feasible to study the response of CVT in fault mode by simulation.

27 September 2023 in Agriculture
Verified
Journal Article
Open access
PDF file
XSxiaoxu sun
xiaoxu sun
YSYue Song
Yue Song
YWYunfei Wang
Yunfei Wang
JQJin Qian
Jin Qian
ZLZhixiong Lu
Zhixiong Lu
TWTao Wang
Tao Wang
Electro-hydraulic suspension systems are one of the key working systems of tractors. Due to the complex and changeable working conditions in the field, it is of great significance to shorten the development cycle of the control strategy and reduce the development cost by using the indoor bench for test verification at the beginning of the study. Based on this, this paper has proposed a complete set of tractor hydraulic-suspension tillage-depth and loading-control test-bench designs. The system was mainly composed of three parts: an industrial computer, a suspension electro-hydraulic control system, and a loading electro-hydraulic control and data-acquisition system. The human–computer interaction interface of the test-bench measurement and control system was built, and the loading-force control system and suspension tillage-depth and loading integrated-control system were built based on PID and fuzzy PID control algorithms, respectively. The system can realize the control of suspension tillage depth and loading during the operation process and has the functions of the real-time acquisition, display, and data storage of related sensor signals during the working process. The test results showed that the response time of the loading-control system was less than 1.2 s, and the maximum steady-state error was less than 0.8%. The response time of the suspension control system was less than 2.3 s, and the maximum steady-state error was less than 1%. The system has good responsiveness and stability. These research results can provide platform and method of support for the development and test of tractor electro-hydraulic suspension systems.

10 July 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
YZYehui Zhao
Yehui Zhao
XCXiaohan Chen
Xiaohan Chen
YSYue Song
Yue Song
GWGuangming Wang
Guangming Wang
ZZZhiqiang Zhai
Zhiqiang Zhai
Tractors equipped with hydro-mechanical transmissions (HMTs) typically deliver excellent fuel-saving performance but are expensive. To improve the fuel economy of cheaper tractors, the authors of this study have designed an HMT for a tractor that uses a simple, single planetary gear to merge the power and analyze its consumption of energy and fuel. First, we introduce the principle of transmission of the HMT and formulate a model to calculate its speed, torque, and efficiency. Second, we analyze the parasitic power of the HMT and simulate its characteristics of efficiency. Finally, we compare the efficiency of transmission and fuel consumption of HMTs with a single planetary gear and Simpson planetary gears. The results showed that parasitic power was obtained when the displacement of the variable pump was negative and the maximum ratio of hydrostatic power in each range was 45–46%. The highest efficiency of the proposed HMT in ranges RL (low range) and RH (high range) were 87% and 89%, respectively. It has a simpler structure than the HMT with Simpson planetary gears and consumes lower amounts of energy and fuel. These attributes make it suitable for use as a transmission system for large- and medium-power tractors with a continuously variable transmission.

26 October 2025 in Agriculture
Verified
Journal Article
Open access
PDF file
XSxiaoxu sun
xiaoxu sun
YSYue Song
Yue Song
ZLZhixiong Lu
Zhixiong Lu
XDXiaoting Deng
Xiaoting Deng
To improve traction efficiency and reduce fuel consumption during tractor tillage operations, a coordinated control method for electro-hydraulic hitch depth and tractor speed was proposed. Based on theoretical analysis, a dynamic model of the tractor–implement system during tillage was established. The principles of coordinated control were developed, and a comprehensive performance evaluation index considering both efficiency and economic performance of the tractor was proposed to optimize the coordinated control objectives. A depth controller and a speed controller were, respectively, designed based on the sliding mode control algorithm. A hardware-in-the-loop test platform for coordinated control of electro-hydraulic hitch depth and travel speed was established via CAN communication. Comparative experiments were conducted under three operational conditions (Condition 1: tillage depth 16 cm, soil specific resistance 2.5–3.5 N/cm2; Condition 2: 20 cm, 3.5–4.5 N/cm2; Condition 3: 24 cm, 4.5–5.5 N/cm2) against the conventional single depth control method under full throttle. Results demonstrated that the coordinated depth-speed control method improved the overall tractor efficiency-economy by 50.0%, 33.3%, and 26.7% under these respective conditions compared to the single depth control method. This method not only ensures operation quality but also enhances the comprehensive performance of the tractor, effectively improving traction efficiency and reducing fuel consumption. Moreover, it demonstrates better adaptability to varying field conditions.