Mohd Azri Hizami Bin Rasid

Dr. Mohd Azri Hizami Bin Rasid


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 January 2020 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
HWHailong Wu
Hailong Wu
DDDaniel Depernet
Daniel Depernet
VLVincent Lanfranchi
Vincent Lanfranchi
KBKHADIJA EL KADRI BENKARA
KHADIJA EL KADRI BENKARA
MRMohd Azri Hizami Bin Rasid
Mohd Azri Hizami Bin Rasid
Synchronous reluctance machine (SynRM) has been studied widely in order to reduce its high torque ripple and improve its low power factor. This paper proposes a torque ripple reduction method for SynRM by defining a novel parameter-torque function. With the help of torque function, the optimal currents aiming to compensate torque harmonics are obtained. The advantage of the proposed method is that torque function can be obtained easily and torque ripple reduction can be achieved by a simple control method. For the purpose of verifying the proposed method, both simulations and experiments are performed. At last, the influence of power supply and parameter uncertainty on the proposed method has also been discussed.

30 July 2020 in Journal of Electrical Engineering & Technology
Verified
Journal Article
Closed access
PDF file
MRMohd Azri Hizami Bin Rasid
Mohd Azri Hizami Bin Rasid
VLVincent Lanfranchi
Vincent Lanfranchi
AOAlejandro Ospina
Alejandro Ospina
KBKhadija El Kadri Benkara
Khadija El Kadri Benkara

1 October 2018 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Closed access
MRMohd Azri Hizami Bin Rasid
Mohd Azri Hizami Bin Rasid
NANurul Fatimah Abdullah
Nurul Fatimah Abdullah
MSMuhamad Imran Mohmad Sairaji
Muhamad Imran Mohmad Sairaji
ARAkhtar Razul Razali
Akhtar Razul Razali
MPMohamad Heerwan Bin Peeie
Mohamad Heerwan Bin Peeie
VLVincent Lanfranchi
Vincent Lanfranchi
Automotive industry is moving toward the electrification of the steering system due to efficiency and active safety integration concerns. Studies on actuators for steer-by-wire (SBW) application is very limited, and no thermal effects on the actuator related to utilization in the SBW have yet been looked into. Using a valid thermal model, and steer torque data collected from a journey mapping, a temperature profile of a prototype synchronous reluctance machine (Syncrel) has been established as if it was utilized as SBW actuator to verify the thermal robustness of the machine in that particular application. The maximum temperature in the winding is shown to not exceed the limit temperature for the winding insulation if the winding resistance can be divided by half of the current resistance in the prototype machine, thus, allowing us to consider Syncrel as another actuator solution for the SBW.

11 November 2017 in International Journal of Precision Engineering and Manufacturing
Verified
Journal Article
Closed access
PDF file
MRMohd Azri Hizami Bin Rasid
Mohd Azri Hizami Bin Rasid
KBKHADIJA EL KADRI BENKARA
KHADIJA EL KADRI BENKARA
VLVincent Lanfranchi
Vincent Lanfranchi

5 November 2018 in MATEC Web of Conferences
Verified
Journal Article
Open access
AWAbbas A. Wahab
Abbas A. Wahab
NAN. Fatimah Abdullah
N. Fatimah Abdullah
MRMohd Azri Hizami Bin Rasid
Mohd Azri Hizami Bin Rasid
Direct current motors (DC motor) are used in the small electric devices commonly. DC motor are cheap and easy to install, thus their popularity. Despite the popularity, faults occur which make diagnosis and detection of faults very important. It avoids financial loss and unexpected shutdown operation causes by these faults. This paper presents an analysis of temperature profile of the much famous small Brushed DC motor with a faulty bearing. The temperature data of healthy DC motor and DC motor with faulty bearing were measured by thermocouple and recorded using data logger in real time until steady state temperature, under different load. The analysis on the steady state temperature allow to conclude that bearing fault can clearly be recognised through characteristics temperature difference with a healthy motor.

5 November 2018 in MATEC Web of Conferences
Verified
Journal Article
Open access
NAN. Fatimah Abdullah
N. Fatimah Abdullah
AWAbbas A. Wahab
Abbas A. Wahab
MRMohd Azri Hizami Bin Rasid
Mohd Azri Hizami Bin Rasid
The heating of brush DC motor in the various applications usually involves the thermal damage to the motor like demagnetization of the magnet and also leads to short circuit. Due to this problem, the temperatures at the sensitive components are needed to be observed for a different number of loads. So, the motor will be delivered some torque when running thus generating the different value of losses. In this paper, a healthy brush DC motor is being used to observed temperature rise from the brush through the motors’ component and lastly to the outer space of the motor. Hence, discussion on the pattern of temperature rise will be discussed.