The use of low-temperature (LT) GaAs layers as dislocation filters in GaAs/Si heterostructures (HSs) was investigated in this study. The effects of intermediate LT-GaAs layers and of the post-growth and cyclic in situ annealing on the structural properties of GaAs/LT-GaAs/GaAs/Si(001) HSs were studied. It was found that the introduction of LT-GaAs layers, in combination with post-growth cyclic annealing, reduced the threading dislocation density down to 5 × 106 cm−2, the root-mean-square roughness of the GaAs surface down to 1.1 nm, and the concentration of non-radiative recombination centers in the near-surface GaAs/Si regions down to the homoepitaxial GaAs level. Possible reasons for the improvement in the quality of near-surface GaAs layers are discussed. On the one hand, the presence of elastic deformations in the GaAs/LT-GaAs system led to dislocation line bending. On the other hand, gallium vacancies, formed in the LT-GaAs layers, diffused into the overlying GaAs layers and led to an increase in the dislocation glide rate. It was demonstrated that the GaAs/Si HSs obtained with these techniques are suitable for growing high-quality light-emitting HSs with self-assembled quantum dots.
In this work, the formation, structural properties, and energy spectrum of novel self-assembled GaSb/AlP quantum dots (SAQDs) were studied by experimental methods. The growth conditions for the SAQDs’ formation by molecular beam epitaxy on both matched GaP and artificial GaP/Si substrates were determined. An almost complete plastic relaxation of the elastic strain in SAQDs was reached. The strain relaxation in the SAQDs on the GaP/Si substrates does not lead to a reduction in the SAQDs luminescence efficiency, while the introduction of dislocations into SAQDs on the GaP substrates induced a strong quenching of SAQDs luminescence. Probably, this difference is caused by the introduction of Lomer 90°-dislocations without uncompensated atomic bonds in GaP/Si-based SAQDs, while threading 60°-dislocations are introduced into GaP-based SAQDs. It was shown that GaP/Si-based SAQDs have an energy spectrum of type II with an indirect bandgap and the ground electronic state belonging to the X-valley of the AlP conduction band. The hole localization energy in these SAQDs was estimated equal to 1.65–1.70 eV. This fact allows us to predict the charge storage time in the SAQDs to be as long as >>10 years, and it makes GaSb/AlP SAQDs promising objects for creating universal memory cells.
Non-volatile memories based on the flash architecture with self-assembled III–V quantum dots (SAQDs) used as a floating gate are one of the prospective directions for universal memories. The central goal of this field is the search for a novel SAQD with hole localization energy (Eloc) sufficient for a long charge storage (10 years). In the present work, the hole states’ energy spectrum in novel InGaSb/AlP SAQDs was analyzed theoretically with a focus on its possible application in non-volatile memories. Material intermixing and formation of strained SAQDs from a GaxAl1−xSbyP1−y, InxAl1−xSbyP1−y or an InxGa1−xSbyP1−y alloy were taken into account. Critical sizes of SAQDs, with respect to the introduction of misfit dislocation as a function of alloy composition, were estimated using the force-balancing model. A variation in SAQDs’ composition together with dot sizes allowed us to find that the optimal configuration for the non-volatile memory application is GaSbP/AlP SAQDs with the 0.55–0.65 Sb fraction and a height of 4–4.5 nm, providing the Eloc value of 1.35–1.50 eV. Additionally, the hole energy spectra in unstrained InSb/AlP and GaSb/AlP SAQDs were calculated. Eloc values up to 1.65–1.70 eV were predicted, and that makes unstrained InGaSb/AlP SAQDs a prospective object for the non-volatile memory application.
Molecular-beam epitaxy is used to produce GaP/Si hybrid substrates that allow the growth of highly efficient light-emitting heterostructures with GaAs/GaP quantum wells. Despite the...
The possibility of forming a strained pseudomorphous quantum well (QW) consisting of a InxGa1 –xAsyP1 –y quaternary alloy upon the deposition of InAs onto the surface of an epitaxial GaP/Si layer with a developed relief is demonstrated. The QW is studied by means of transmission electron microscopy and steady-state photoluminescence spectroscopy. The formation of two QW segments different in width and composition of the InxGa1 –xAsyP1 –y alloy is observed; in this case, an increase in the QW width is accompanied by a decrease in the content of In and As atoms. The lateral dimensions of the QW segments are no smaller than 20 nm. The QW segments correspond to two different low-temperature photoluminescence bands. The experimentally observed phenomena are interpreted on the assumption of transformation of the surface under the action of elastic strains during heteroepitaxy of InAs on the terraced GaP surface.
1 January 2019 in Физика и техника полупроводников
Molecular-beam epitaxy is used to produce GaP/Si hybrid substrates that allow the growth of highly efficient light-emitting heterostructures with GaAs/GaP quantum wells. Despite the relatively high concentration of nonradiative-recombination centers in GaP/Si layers, GaAs/GaP quantum-well heterostructures grown on GaP/Si hybrid substrates are highly competitive in terms of efficiency and temperature stability of luminescence to similar heterostructures grown on lattice-matched GaP substrates.