This research investigated fatigue crack propagation on the lower surface of rocket deflector troughs in offshore rocket launch platforms. Initially, a numerical model of an offshore rocket launch platform was established using ABAQUS based on the Extended Finite Element Method (XFEM). Subsequently, two variable parameters—the initial crack length and initial tilt angle—were introduced. This research systematically analysed the impact of these parameters on the fatigue crack propagation patterns in both the maximum stress and maximum deformation regions of the deflector channels under the combined conditions of high temperature and impact. Finally, the research indicated that the propagation length of surface cracks in the deflector trough exhibited an initial increase followed by a decrease with the rise in the pre-set inclination angle. Notably, the stable propagation rate of the crack in the region of maximum deformation surpassed that observed in the region of maximum stress. Through meticulous comparative analysis, it was evident that temperature loading significantly exacerbated the initiation and propagation of cracks, particularly in the upper region of the deflector channel’s lower surface.

To investigate the influence of the number of inlet pipes on the characteristics of flow field and the discharge of solid particles such as bait residue and fish feces, STAR-CCM + was used to analyze the flow of field distribution in a ship-based aquaculture cabin under the conditions of two and four inlet pipes, thus optimizing the inlet pipes of the ship-based aquaculture cabin. Furthermore, a three-phase flow model (solid–liquid–gas) was established to determine the movement characteristics of similar solid particles of residual bait and fish manure in the cabin, while the emission performance of solid particles was analyzed. Finally, the formation of solid particles in the center of the aquaculture cabin was simulated. The simulation results show that the effect of flow field is better with two inlet pipes, and the discharge volume of the bottom outlet has little impact on the emission of solid particles. Findings from this study can serve as a reference and basis for the design and optimization of the aquaculture cabin of an aquaculture vessel.