Hind Barghash

Dr. Hind Barghash

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 February 2022 in Frontiers in Bioengineering and Biotechnology
Verified
Journal Article
Open access
Kenneth OkeduKenneth Okedu
Kenneth Okedu
HBHind Barghash
Hind Barghash
HNHusam A. Al Nadabi
Husam A. Al Nadabi
Due to the adverse effect of energy production from traditional fossil fuels, the move toward renewable and sustainable energy has become imperative. The waste disposal sector offers hope toward environmental sustainability and potential to generate strong income for any economy. The region of the Gulf Cooperation Council (GCC) member countries in the Middle East generates the highest quantity of municipal waste per capita, compared to other countries globally. In the GCC region, waste is usually just dumped at different landfill stations. Effective waste management is imperative for environmental protection and sustainable development. This article presents a review of the sustainable waste management strategies in Oman, in line with the United Nations goal on environmental management of waste. The current waste management strategies in Oman were discussed, and various waste-to-energy (WTE) technologies were proposed. These proposed WTE strategies would help in effective waste management in Oman and also in increasing the power grid capability. The salient part of this article is an overview of the ability of using landfill leachate as feedstock to produce clean and green hydrogen gas using different photo-fermentation processes. The production of hydrogen using single photo-fermentation process using landfill leachate alone, with leachate and addition of inoculum such as sewage sludge, and with substrates such as sucrose, glucose, and landfill leachate was investigated by utilizing a batch bioreactor and anaerobic conditions at controlled temperature, different initial pH, and heat treatment temperature range. Furthermore, a prototype model for the optimization of the inoculum size and the substrate was proposed with 2-level factorial design using Design Expert. The data gathering for this study was carried out by investigating different regions in Oman having the lowest and highest waste produce, the average annual waste for the different governorates, and the total amount of waste for five consecutive years (2015–2020), for the various engineered landfills. The cost of managing waste in the different governorates of Oman was presented, considering the average annual waste produced, in various regions of the country for the duration of the study. Furthermore, some challenges and opportunities in carrying out effective waste management in Oman were addressed.

25 November 2022 in Frontiers in Bioengineering and Biotechnology
Verified
Journal Article
Open access
HBHind Barghash
Hind Barghash
AFArwa Al Farsi
Arwa Al Farsi
Kenneth OkeduKenneth Okedu
Kenneth Okedu
BAButhaina Mahfoud Al-Wahaibi
Buthaina Mahfoud Al-Wahaibi
Recently, the management of water and wastewater is gaining attention worldwide as a way of conserving the natural resources on the planet. The traditional wastewater treatment in Oman is such that the treated effluent produced is only reused for unfeasible purposes such as landscape irrigation, cooling, or disposed of in the sea. Introducing more progressive reuse applications can result in achieving a circular economy by considering treated effluent as a source of producing new products. Accordingly, wastewater treatment plants can provide feedstock for green hydrogen production processes. The involvement of the wastewater industry in the green pathway of production scores major points in achieving decarbonization. In this paper, the technical and economic feasibility of green hydrogen production in Oman was carried out using a new technique that would help explore the benefits of the treated effluent from wastewater treatment in Oman. The feasibility study was conducted using the Al Ansab sewage treatment plant in the governate of Muscat in Wilayat (region), Bousher. The results have shown that the revenue from Al Ansab STP in a conventional case is 7.02 million OMR/year, while sustainable alternatives to produce hydrogen from the Proton Exchange Membrane (PEM) electrolyzer system for two cases with capacities of 1,500 kg H2/day and 50,000 kg H2/day, would produce revenue of 8.30 million OMR/year and 49.73 million OMR/year, respectively.

17 November 2021 in Frontiers in Bioengineering and Biotechnology
Verified
Journal Article
Open access
HBHind Barghash
Hind Barghash
Kenneth OkeduKenneth Okedu
Kenneth Okedu
ABAisha Al Balushi
Aisha Al Balushi
Recently, it has become imperative to find new sustainable and renewable sources of energy, in order to avoid dependence on non-renewable traditional energy resources. This would help to overcome the depleting of natural resources for energy production. Hydrogen gas production using biological processes is one of the most attractive solutions in this regard, due to its high energy content and ecofriendly nature. Production of hydrogen using single photo-fermentation process and landfill leachate as substrate was carried out in this paper, by utilizing batch bio-reactor and anaerobic conditions. The pH value and temperature, play an essential role in a bio-hydrogen production process. Thus, in this study, the pH values considered were 6, 6.5, and 7.2, respectively, at a controlled temperature of 37 ± 1°C. This study investigated various schemes that have the possibility of producing hydrogen using; landfill leachate alone, with leachate and addition of inoculum such as sewage sludge, and with substrate such as sucrose and glucose. All experiments were conducted with and without mixing, for effective comparative study. Heat and pH pretreatment were applied in each experiment with the objectives of decreasing the activities of methane-producing bacteria and enhancing the activities of hydrogen-producing bacteria. The hydraulic retention time used in this study was 48 h, in order to obtain optimal performance of the schemes employed. Analysis of liquid leachate was performed for each experiment, and based on the obtained results, the maximum yield of hydrogen produced was 5,754 ml H2/L, with a medium pH scale of 6.0, fermentation temperature of 37 ± 1°C and constant mixing speed of 100 rpm.

29 October 2022 in Energies
Verified
Journal Article
Open access
PDF file
HBHind Barghash
Hind Barghash
ZAZuhoor Zahran AlRashdi
Zuhoor Zahran AlRashdi
Kenneth OkeduKenneth Okedu
Kenneth Okedu
Peter DesmondPeter Desmond
Peter Desmond
Currently, there is a global challenge of water scarcity due to climate change, rising temperatures, and other factors. One way to address this growing global challenge is by implementing technology to treat polluted water by reusing it in areas such as irrigation, cooling, and energy production, based on bio-hydrogen gas. Hydrogen gas can be produced by several methods, including dark fermentation. In this study, hydrogen gas was produced by 1L of sludge and Treated Effluent (TE) with several methods, using a reactor with a volume of 0.96 H2 L/L media. The Life-Cycle Impact Assessment (LCIA) process was used to study resource depletion, the ecosystem, and human impacts, and efforts were made to reduce the negative impacts by implementing several solutions. In this study, OpenLCA software was used as a tool for calculating the impacts, along with the ecoinvent database. Further analysis was carried out by comparing the LCIA with and without the use of solar energy. The results show that implementing hydrogen gas production with a solar energy system will help to obtain the best solution and reduce the carbon footprint, with 1.12 × 104 kg CO2 equivalent and a water depletion of 2.83 × 104 m3.

21 April 2021 in Frontiers in Energy Research
Verified
Journal Article
Open access
PDF file
KOKenneth E. Okedu
Kenneth E. Okedu
HBHind Barghash
Hind Barghash
One of the ways of generating electrical power from wind energy is by employing the promising technology of the permanent magnet synchronous generator (PMSG) variable speed wind turbine (VSWT). With the daily increase and integration of wind farms into traditional power grids, it is imperative to carry out transient stability studies of wind generators in wind farms, in order to fulfill the operational grid codes. To solve the transient stability intricacies posed by the stochastic nature of wind energy during transient states or grid faults, this paper presents the enhancement of PMSG wind turbine considering the excitation parameters of the insulated gate bipolar transistors (IGBTs) of the wind generator. The investigation was carried out using the turn on and turn off resistances of the IGBTs of the power converters of the PMSG wind turbine, considering different scenarios, with and without over voltage protection scheme. A severe three-line-to-ground fault was used to test the robustness and rigidity of the controllers of the wind generator during transient state. Furthermore, the results obtained using the PMSG wind turbine were compared to those using the doubly fed induction generator (DFIG) wind turbine. The evaluation of the system performance was done using the power system computer “aided” design and electromagnetic transient including DC (PSCAD/EMTDC) platform. The same conditions of operation were used in investigating the various scenarios considered in this study.

19 January 2022 in Journal of Water Reuse and Desalination
Verified
Journal Article
Open access
PDF file
Haider M. ZwainHaider M. Zwain
Haider M. Zwain
HBHind Barghash
Hind Barghash
MVMohammadtaghi Vakili
Mohammadtaghi Vakili
HMHasan Sh. Majdi
Hasan Sh. Majdi
IDIrvan Dahlan
Irvan Dahlan
This study carried out the anaerobic digestion of recycled paper mill wastewater (RPMW) in a high-rate novel anaerobic baffled reactor. The parametric interaction between influent chemical oxygen demand (CODin) and hydraulic retention time (HRT) was modeled, and process responses were optimized by the response surface methodology (RSM) using a three-level factorial design. The results showed that the optimal condition was determined at CODin of 4,000 mg/L and HRT of 2 days and predicted values for COD removal, biochemical oxygen demand (BOD) removal, lignin removal, CH4 content, and CH4 production were found to be 94%, 98%, 68%, 85%, and 20.8 L CH4/d, respectively. According to the statistical analysis of the RSM, all models were significant with very low probability values (from 0.0045 to <0.0001). The parametric interaction showed that increasing the CODin positively influenced the COD, BOD, and lignin removal efficiencies, effluent alkalinity, and methane content and production but was unfavorable for pH and effluent volatile fatty acid (VFA). Shortening the HRT negatively affected the COD, BOD, and lignin removal efficiencies, pH level, alkalinity, and methane content and production, and increased the VFA effluent concentration. The optimal conditions were established at 4,000 mg/L COD and HRT of 2 days, corresponding to the predicted COD, BOD, and lignin removal efficiencies of 91, 98, and 71%, respectively, whereas 28 mg/L of VFA and 0.125 L of CH4/g CODremoved were generated.