Experimental and numerical investigations of the instantaneous ablation behavior of laminated carbon fiber-reinforced polymer (CFRP) exposed to an intense continuous-wave (CW) laser in a supersonic wind tunnel are reported. We establish an in situ observation measurement in the experiments to examine the instantaneous ablation behavior. The surface recession depth is calculated by using the Particle Image Velocimetry (PIV) method, taking the ply angle of laminated CFRP as a reference. A coupled thermal-fluid-ablation numerical model incorporating mechanisms of oxidation, sublimation, and thermomechanical erosion is developed to solve the ablation-through problem of multilayer materials. The results show that the laser ablation depth is related to the laser power density, airflow velocity and airflow mode. Thermomechanical erosion is the primary ablation mechanism when the surface temperature is relatively low and the cavity flow mode is a closed cavity flow. When the surface temperature reaches the sublimation of carbon and the airflow mode is transformed to open cavity flow, sublimation plays a dominant role and the ablation rate of thermomechanical erosion gradually decreases.
The solar power tower (SPT) receiver design should be able to stand with fatigue damage caused by the passage of clouds, start-up and shut-down. In this paper, to investigate the impacts of incident heat flux distribution and SPT site weather data on the thermal stress, fatigue life and allowable flux density (AFD) of the molten salt receiver, the relationship between the fatigue life and AFD of the tube wall is developed based on the coupled thermal-structural analysis and Miner linear damage theory. The results show that whether the cosine effect of the circumferential heat flux distribution considered has a significant influence on the location and magnitude of the maximum thermal stress of the tube wall, which lead to the difference in the tube wall fatigue damage. The AFD are respectively 829 kW/m2 and 1037 kW/m2 under uniform and cosine circumferential heat flux distributions for the site of Barstow, USA when the design lifetime of the tube is 30 years. Compared with the SPT site of Barstow, USA, the fatigue damage of the tube wall in Sevilla, Spain and Delingha, China are lower under the same conditions due to lower insolation hours of DNI in the range of 750-1100 W/m2. The AFD are respectively 829 kW/m2, 973 kW/m2 and 997 kW/m2 for the site of Barstow, USA, Sevilla, Spain and Delingha, China with 30 years design life. These findings give guidelines for the operation reliability of the SPT molten salt receiver tube.
21 June 2024 in International Journal of Thermal Sciences