Experimental and numerical investigations of the instantaneous ablation behavior of laminated carbon fiber-reinforced polymer (CFRP) exposed to an intense continuous-wave (CW) laser in a supersonic wind tunnel are reported. We establish an in situ observation measurement in the experiments to examine the instantaneous ablation behavior. The surface recession depth is calculated by using the Particle Image Velocimetry (PIV) method, taking the ply angle of laminated CFRP as a reference. A coupled thermal-fluid-ablation numerical model incorporating mechanisms of oxidation, sublimation, and thermomechanical erosion is developed to solve the ablation-through problem of multilayer materials. The results show that the laser ablation depth is related to the laser power density, airflow velocity and airflow mode. Thermomechanical erosion is the primary ablation mechanism when the surface temperature is relatively low and the cavity flow mode is a closed cavity flow. When the surface temperature reaches the sublimation of carbon and the airflow mode is transformed to open cavity flow, sublimation plays a dominant role and the ablation rate of thermomechanical erosion gradually decreases.
16 February 2023 in Mechanics of Advanced Materials and Structures
A novel 3D centrosymmetric lattice that exhibits a large twist angle during compression is proposed by tailoring the twist buckling mode of a body-centered cubic lattice and a simple cubic truss to the first. The imperfections of offset and multimaterial systems are introduced to control the twist direction. Effects of geometrical parameters and material properties on twist behavior are studied. Results suggest that the buckling-driven lattice configuration can twist at an angle of 100° and an average angle per unit axial strain of 6.7°/%. The novel configurations can be used as force switches, safety devices, and temperature-controlled transmission devices.
25 April 2023 in IEEE Transactions on Plasma Science
In previous studies, the armature–rail sliding contact interface is usually considered to be an ideal slide in which both rails are parallel and symmetric. However, due to the influence of structural deformation of the barrel affected by boundary constraints and the manufacturing errors of rails and armature, it often leads to a variety of nonideal the armature–rail matching such as space curved or twisted rails, offset or deflected armature, and so on. This article focuses on the common vertical curved rail in electromagnetic railgun. By introducing centrifugal force effects and coupling electromagnetic force, the armature–rail contact pressure is analyzed theoretically. According to the 3-D finite-element simulation results, the effect of centrifugal force on sliding contact pressure should not be ignored. The effects of different curved radii, velocities, and densities of armature on the contact pressure are compared and analyzed. The influence law on the contact pressure is obtained, which provides a theoretical basis for the design of the railgun.
This article presents a theoretical analysis of the thermal buckling behavior of material-filled truss-core sandwich panels, which have load-bearing capacities and multiple functions. The homogeneous stiffness matrix of the filled truss core is solved by the energy equilibrium method. The governing equations are derived based on Hamilton’s principle. The eigenvalue method is used to solve the governing equations, and the buckling matrix is determined. By simplifying this buckling matrix, buckling formula has been derived. A three-dimensional finite element model is developed to validate the theoretical results. Finally, the effects of geometrical parameters, material properties and boundary conditions on the thermal buckling temperature of material-filled sandwich panels are analyzed.