In this study, time-dependent, one-dimensional modeling of a surface dielectric barrier discharge (SDBD) device, driven by a sinusoidal voltage of amplitude 1–3 kV at 20 kHz, in argon is described. An SDBD device with two Cu-stripe electrodes, covered by the quartz dielectric and with the discharge gap of 20 × 10−3 m, was assumed, and the time-dependent, one-dimensional discharge parameters were simulated versus time across the plasma gap. The plasma device simulated in the given arrangement was constructed and used for biocompatible antibacterial/antimicrobial coating of plasmonic particle aerosol and compared with the coating strategy of the DBD plasma jet. Simulation results showed discharge consists of an electrical breakdown, occurring in each half-cycle of the AC voltage with an electron density of 1.4 × 1010 cm−3 and electric field strength of 4.5 × 105 Vm−1. With SDBD, the surface coating comprises spatially distributed particles of mean size 29 (11) nm, while with argon plasma jet, the nanoparticles are aggregated in clusters that are three times larger in size. Both coatings are crystalline and exhibit plasmonic features in the visible spectral region. It is expected that the particle aerosols are collected under the ionic wind, induced by the plasma electric fields, and it is assumed that this follows the dominant charging mechanisms of ions diffusion. The cold plasma strategy is appealing in a sense; it opens new venues at the nanoscale to deal with biomedical and surgical devices in a flexible processing environment.
Organic solar cells are famous for their cheap solution processing. Their industrialization needs fast designing of efficient materials. For this purpose, testing of large number of materials is necessary. Machine learning is a better option due to cheaper prediction of power conversion efficiencies. In the present work, machine learning was used to predict power conversion efficiencies. Experimental data were collected from the literature to feed the machine learning models. A detailed data visualization analysis was performed to study the trends of the dataset. The relationship between descriptors and power conversion efficiency was quantitatively determined by Pearson correlations. The importance of features was also determined using feature importance analysis. More than 10 machine learning models were tried to find better models. Only the two best models (random forest regressor and bagging regressor) were selected for further analysis. The prediction ability of these models was high. The coefficient of determination (R2) values for the random forest regressor and bagging regressor models were 0.892 and 0.887, respectively. The Shapley additive explanation (SHAP) method was used to identify the impact of descriptors on the output of models.
28 August 2020 in Mathematical Problems in Engineering
The main emphasis on this paper is to analyze the axisymmetric flow and heat transfer in a liquid film over an unsteady radially stretching surface in the presence of a transverse magnetic field. The similarity transformations are used to reduce the highly nonlinear governing partial differential equations for momentum and energy into a set of ordinary differential equations. A numerical scheme is developed for the reduced nonlinear differential equations for the velocity and temperature fields. The literature survey shows that the present problem of thin film flow over a radially stretching sheet has not been studied before. The features of the flow and heat transfer characteristic for different values of governing parameters such as unsteadiness parameter, Prandtl number, Eckert number, and magnetic parameter are thoroughly examined. This study noticed that, by increasing the magnetic parameter and unsteadiness parameter, film thickness decreases.
There has always been a quest for nanotechnology to develop inexpensive coating methods with the capability of depositing biocompatible nanomaterials on biomedical and surgical tools. In this mini-report, a plasma-based innovative idea of coating a solid surface with antibacterial/antimicrobial nanosilver is floated and experimentally realized. The desired antibacterial nanosilver was obtained from laser ablation and directly entrained in an outflowing plasma jet, excited in the flow of argon at 10 l min−1 using 20 kV/20 kHz. Under these conditions, the jet can protrude 15 mm deeply into ambient air. The quality of the surface coating can be described by sparsely distributed particles or densely agglomerated clusters, controlled by the plasma length and the surface separation. Apart from the coating, plasma interaction leads to the sterilization of the exposed surface. The idea is essentially important to extend and upscale for coating biomedical and surgical devices in a flexible open processing environment.