Electro-optical photonic integrated circuits (PICs) based on lithium niobate (LiNbO3) have demonstrated the vast capabilities of materials with a high Pockels coefficient1,2. They enable linear and high-speed modulators operating at complementary metal–oxide–semiconductor voltage levels3 to be used in applications including data-centre communications4, high-performance computing and photonic accelerators for AI5. However, industrial use of this technology is hindered by the high cost per wafer and the limited wafer size. The high cost results from the lack of existing high-volume applications in other domains of the sort that accelerated the adoption of silicon-on-insulator (SOI) photonics, which was driven by vast investment in microelectronics. Here we report low-loss PICs made of lithium tantalate (LiTaO3), a material that has already been adopted commercially for 5G radiofrequency filters6 and therefore enables scalable manufacturing at low cost, and it has equal, and in some cases superior, properties to LiNbO3. We show that LiTaO3 can be etched to create low-loss (5.6 dB m−1) PICs using a deep ultraviolet (DUV) stepper-based manufacturing process7. We demonstrate a LiTaO3 Mach–Zehnder modulator (MZM) with a half-wave voltage–length product of 1.9 V cm and an electro-optic bandwidth of up to 40 GHz. In comparison with LiNbO3, LiTaO3 exhibits a much lower birefringence, enabling high-density circuits and broadband operation over all telecommunication bands. Moreover, the platform supports the generation of soliton microcombs. Our work paves the way for the scalable manufacture of low-cost and large-volume next-generation electro-optical PICs.
The realization of high-quality (Q) resonators regardless of the underpinning material platforms has been a ceaseless pursuit, because the high-Q resonators provide an extreme environment for confining light to enable observations of many nonlinear optical phenomenon with high efficiencies. Here, photonic microresonators with a mean Q factor of 6.75 × 106 were demonstrated on a 4H-silicon-carbide-on-insulator (4H-SiCOI) platform, as determined by a statistical analysis of tens of resonances. Using these devices, broadband frequency conversions, including second-, third-, and fourth-harmonic generations have been observed. Cascaded Raman lasing has also been demonstrated in our SiC microresonator for the first time, to the best of our knowledge. Meanwhile, by engineering the dispersion properties of the SiC microresonator, we have achieved broadband Kerr frequency combs covering from 1300 to 1700 nm. Our demonstration represents a significant milestone in the development of SiC photonic integrated devices.
21 November 2019 in Energy & Environmental Science
The development of efficient and cost-effective catalytic electrodes is of great importance to electrolysis. Herein, a strategy of fabricating practical catalytic electrodes by depositing conductive catalysts on inexpensive and easily accessible insulating substrates of paper, textiles and sponge has been realized and well developed. These electrodes are found to be highly active toward overall water splitting. As a distinctive example, the Ni–P–B/paper electrode affords 50 mA cm−2 at overpotentials of only 76 mV for the hydrogen evolution reaction and 263 mV for the oxygen evolution reaction, and can survive at large current density of 1000 mA cm−2 for over 240 h without apparent performance degradation in 1.0 M KOH. A two-electrode cell constructed by this paper electrode, which is only 1/5 the weight of a traditional metal electrode, delivered 50 mA cm−2 water-splitting current at a cell voltage of only 1.661 V, rivalling the integrated state-of-the-art Pt–C/Ni and IrO2/Ni electrode. Moreover, a functional Ni–P–B/paper ring electrode with in situ separation function has been constructed, enabling simultaneous generation, separation and collection of hydrogen and oxygen. This discovery may enable a large extension toward practical catalytic electrodes that are also active, cheap, light, flexible, earth-abundant and recyclable.
1 September 2022 in Science China Physics, Mechanics & Astronomy
Photonic integrated circuits (PICs) based on lithographically patterned waveguides provide a scalable approach for manipulating photonic bits, enabling seminal demonstrations of a wide range of photonic technologies with desired complexity and stability. While the next generation of applications such as ultra-high speed optical transceivers, neuromorphic computing and terabit-scale communications demand further lower power consumption and higher operating frequency. Complementing the leading silicon-based material platforms, the third-generation semiconductor, silicon carbide (SiC), offers a significant opportunity toward the advanced development of PICs in terms of its broadest range of functionalities, including wide bandgap, high optical nonlinearities, high refractive index, controllable artificial spin defects and complementary metal oxide semiconductor-compatible fabrication process. The superior properties of SiC have enabled a plethora of nano-photonic explorations, such as waveguides, micro-cavities, nonlinear frequency converters and optically-active spin defects. This remarkable progress has prompted the rapid development of advanced SiC PICs for both classical and quantum applications. Here, we provide an overview of SiC-based integrated photonics, presenting the latest progress on investigating its basic optoelectronic properties, as well as the recent developments in the fabrication of several typical approaches for light confinement structures that form the basic building blocks for low-loss, multi-functional and industry-compatible integrated photonic platform. Moreover, recent works employing SiC as optically-readable spin hosts for quantum information applications are also summarized and highlighted. As a still-developing integrated photonic platform, prospects and challenges of utilizing SiC material platforms in the field of integrated photonics are also discussed.