Loading berm is an effective method for improving highway subgrade stability in soft soil areas. However, this method requires lots of construction space. It is not applicable in some areas with narrow construction spaces. To address this problem, an embedded loading berm (ELB) is proposed to improve highway subgrade stability, and the effects of ELB on the stability of the highway subgrade were investigated by analytical and numerical methods. Firstly, an analytical model was proposed to analyze the relationship between the ELB dimensions and subgrade stability factors. Then, numerical simulations were carried out to further reveal the stability factor of an actual subgrade with different ELBs. Lastly, ELB parameters’ sensitivity to the ELB stability factors was studied. The results show that the stability of the highway subgrade in soft soil areas can be significantly improved by the proposed ELB. With the loading berm width and height increasing, the subgrade stability factors can increase. The stability factors’ increase ratio with the increased ELB width is greater than that with the increased ELB height. The ELB parameter sensitivity order on the subgrade stability is as follows: width > height > density > cohesion > internal friction. In the design process, the ELB width and height can be mainly focused on. The research is significant for promoting the application of ELB in soft soil areas.
The shield tunnel end reinforcement is important in the water-rich sandy strata. In this paper, a trapezoidal freezing soil mass was proposed to reinforce the shield tunnel end, and the reinforcement effects were evaluated based on the Wuhu River-Crossing Tunnel. Firstly, the influences of the freezing soil mass geometric dimensions on the stability of the tunnel portal were analyzed. Then, displacements of the tunnel portal with different trapezoidal freezing soil masses were simulated. Finally, the trapezoidal freezing soil mass was applied in the Wuhu River-Crossing Tunnel. The results show that the portal’s stability is improved significantly with increased freezing soil mass longitudinal length if the length is less than the tunnel diameter. The lower side of the trapezoidal freezing soil mass has a greater influence on the tunnel portal stability than the upper side. The trapezoidal freezing soil mass is more effective than the rectangular freezing soil mass for the Wuhu River-Crossing Tunnel end reinforcement. The trapezoidal freezing soil mass is a good choice for the shield tunnel end soil reinforcement in water-rich sandy strata. This study provides a freezing reinforcement method for the large-diameter shield tunnel end, which provides guidelines for similar engineering.
Pasting carbon fiber reinforced polymer (CFRP) has become an effective method to reinforce the circular tunnel. For this reinforcement method, the mechanical performance of the curved substrate is important to keep the coordinated deformation of CFRP and the lining concrete. To investigate the effect of interface curvature on the stresses of the reinforced interface, an analytical model is proposed for the curved reinforced interface with the consideration of the interface bond–slip relationship. Additionally, a 3D numerical model is established to further investigate the effects of some important parameters (CFRP’s layer, length, elastic modulus, thickness and the adhesive’s elastic modulus, thickness) on the reinforced interface stresses. The results reveal that the stress state of the curved reinforced interface is more complex than that of the plane reinforced interface. With decreasing the radius of the curved reinforced interface, the interface radial stresses are increased significantly, while the circumferential stresses hardly change. For the adhesive, decreasing the elastic modulus and thickness of the adhesive layer can significantly improve the stress state of the reinforced interface. For the CFRP, decreasing the thickness, elastic modulus and layer number of CFRP is conducive to full utilization of materials and long-term combined work of the concrete and CFRP.
The seismic landslides are common natural hazards in the mountainous areas, and they can cause a large number of casualties and property losses directly. The dynamic response characteristics of slope under the action of the seismic wave are the primary problem in evaluating the slope seismic stability. In this paper, the research is carried out on the effects of slope angle, morphology, and seismic wave frequency on the slope dynamic responses. Firstly, the slopes with different shapes (straight, concave, and convex slopes) are modeled. Secondly, the slope acceleration amplification factors and shear strain increment are investigated and analyzed. Finally, the dynamic response mechanisms are revealed using the ray analysis method. The results show that the acceleration response of each part of the slope is different for different frequencies, and the value of the amplification factor at the slope surface center is greater than that at the slope top. Slope morphology has significant effects on the dynamic response of the slope, and the slope surface centroid amplification factors change with different slope morphology. Slope angle has prominent impacts on the slope dynamic responses; the amplification factor is greatest at the slope angle of 30°. This study deepens the understanding of the slope seismic dynamic responses, which is vital for predicting slope instability and disaster reduction.