We fabricate elliptical planar Hall effect magnetometers with Permalloy thickness ranging between 25 and 200 nm. We study the thickness dependence of their equivalent magnetic noise by examining the effect of the layer thickness on the signal and noise including Joule heating contributions. Sensors with a thickness of 50 nm achieve equivalent magnetic noise as low as ∼24 pT/ Hz at 50 Hz and ∼36 pT/ Hz at 10 Hz, which are the best reported values for any type of magnetic sensor of similar or smaller size. These results are achieved without the use of magnetic flux concentrators, which helps to reduce the sensor volume while improving its spatial resolution and reducing the complexity and time of its production and, hence, its potential cost. We discuss different routes for further resolution improvements.
The magnetic field range in which a magnetic sensor operates is an important consideration for many applications. Elliptical planar Hall effect (EPHE) sensors exhibit outstanding equivalent magnetic noise (EMN) on the order of , which makes them promising for many applications. Unfortunately, the current field range in which EPHE sensors with EMN can operate is sub-mT, which limits their potential use. Here, we fabricate EPHE sensors with an increased field range and measure their EMN. The larger field range is obtained by increasing the uniaxial shape-induced anisotropy parallel to the long axis of the ellipse. We present measurements of EPHE sensors with magnetic anisotropy which ranges between 12 Oe and 120 Oe and show that their EMN at 10 Hz changes from 800 to 56 . Furthermore, we show that the EPHE sensors behave effectively as single magnetic domains with negligible hysteresis. We discuss the potential use of EPHE sensors with extended field range and compare them with sensors that are widely used in such applications.
Using planar Hall effect sensors with magnetic flux concentrators, we measure magnetic fields at frequencies below 100 Hz. We show that for a measurement time of up to 100 s, it is possible to detect fields of ∼700 fT and ∼1 pT at 10 Hz and 0.1 Hz, respectively. In addition, we measure the linearity and hysteresis of the sensor for fields ≤2.6 μ T. These features, combined with the sensor miniature size, low power consumption, and potential low cost, may pave the way for usage in a wide range of applications.
We report a specially designed magnetic field gradiometer based on a single elliptical planar Hall effect (PHE) sensor, which allows measuring magnetic field at nine different positions in a 4 mm length scale. The gradiometer detects magnetic field gradients with equivalent gradient magnetic noises of ∼958, ∼192, ∼51, and ∼26 nT/m√ Hz (pT/mm√Hz) at 0.1, 1, 10, and 50 Hz, respectively. The performance of the gradiometer is tested in ambient conditions by measuring the field gradient induced by electric currents driven in a long straight wire. This gradiometer is expected to be highly useful for the measurement of magnetic field gradients in confined areas for its small footprint, low noise, scalability, simple design, and low costs.