René Füßel

Mr. René Füßel

orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 September 2022 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
JTJuliane Troschitz
Juliane Troschitz
RFRené Füßel
René Füßel
RKRobert Kupfer
Robert Kupfer
Maik GudeMaik Gude
Maik Gude
Thermoplastic composites (TPCs) are predestined for use in lightweight structures, for example, in automotive engineering, due to their good specific mechanical properties. In many areas of lightweight design, the use of metal inserts for load introduction into composite structures has become established. The inserts can be embedded during composite manufacturing without fibre damage. The technology is based on the concept of moulding holes with a pin tool and simultaneously placing the insert in the moulded hole. The embedding process results in a complex material structure in the joining zone with inhomogeneous three-dimensional fibre orientation and locally varying fibre content. The local material structure has a significant influence on the mechanical behaviour of the joining zone. For this reason, in situ computed tomography (CT) analyses are conducted in this work for a better understanding of the damage behaviour in the joining zone. In situ CT push-out tests were carried in the two thickness directions of along and opposed to the direction of the embedding process. The characteristic local material structure in the joining zone led to direction-dependent damage behaviour based on different failure modes.

21 November 2022 in Polymers
Verified
Journal Article
Open access
PDF file
BGBenjamin Gröger
Benjamin Gröger
David RömischDavid Römisch
David Römisch
Martin KrausMartin Kraus
Martin Kraus
JTJuliane Troschitz
Juliane Troschitz
RFRené Füßel
René Füßel
Maik GudeMaik Gude
Maik Gude
The paper presents research regarding a thermally supported multi-material clinching process (hotclinching) for metal and thermoplastic composite (TPC) sheets: an experimental approach to investigate the flow pressing phenomena during joining. Therefore, an experimental setup is developed to compress the TPC-specimens in out-of-plane direction with different initial TPC thicknesses and varying temperature levels. The deformed specimens are analyzed with computed tomography to investigate the resultant inner material structure at different compaction levels. The results are compared in terms of force-compaction-curves and occurring phenomena during compaction. The change of the material structure is characterized by sliding phenomena and crack initiation and growth.

2 April 2011 in Applied Composite Materials
Verified
Journal Article
Closed access
PDF file
WHWerner Hufenbach
Werner Hufenbach
FAFrank Adam
Frank Adam
RFRené Füßel
René Füßel
MKMichael Krahl
Michael Krahl
DWDaniel Weck
Daniel Weck

1 September 2017 in Polymer Testing
Verified
Journal Article
Closed access
EDE. Dohmen
E. Dohmen
RFRené Füßel
René Füßel
MMMichael Müller-Pabel
Michael Müller-Pabel
MSM. Schäffler
M. Schäffler
Maik GudeMaik Gude
Maik Gude

Verified
Journal Article
Open access
PDF file
ABAndreas Borowski
Andreas Borowski
BGBenjamin Gröger
Benjamin Gröger
RFRené Füßel
René Füßel
Maik GudeMaik Gude
Maik Gude
Deformation of continuous fibre reinforced plastics during thermally-assisted forming or joining processes leads to a change of the initial material structure. The load behaviour of composite parts strongly depends on the resultant material structure. The prediction of this material structure is a challenging task and requires a deep knowledge of the material behaviour above melting temperature and the occurring complex forming phenomena. Through this knowledge, the optimisation of manufacturing parameters for a more efficient and reproducible process can be enabled and are in the focus of many investigations. In the present paper, a simplified pultrusion test rig is developed and presented to investigate the deformation behaviour of a thermoplastic semi-finished fiber product in a forming element. Therefore, different process parameters, like forming element temperature, pulling velocity as well as the forming element geometry, are varied. The deformation behaviour in the forming zone of the thermoplastic preimpregnated continuous glass fibre-reinforced material is investigated by computed tomography and the resultant pulling forces are measured. The results clearly show the correlation between the forming element temperature and the resulting forces due to a change in the viscosity of the thermoplastic matrix and the resulting fiber matrix interaction. In addition, the evaluation of the measurement data shows which forming forces are required to change the shape of the thermoplastic unidirectional material with a rectangular cross-section to a round one.