Despite the efforts for minimizing the usage of heavy metals, anthropogenic activities still generate high amounts of wastewater containing these contaminants that cause significant health and environmental problems. Given the drawbacks of the conventional physical and chemical methods currently used, natural biosorbents (microbial cells or their products) arise as promising environmentally friendly alternatives. In this study, the binding efficiency of the polysaccharide secreted by Enterobacter A47, FucoPol, towards lead (Pb²⁺), cobalt (Co²⁺), copper (Cu²⁺) and zinc (Zn²⁺) cations was demonstrated. FucoPol revealed a higher performance for the biosorption of Pb²⁺, with a maximum overall metal removal of 93.9 ± 5.3% and a specific metal uptake of 41.1 ± 2.3 mg/gEPS, from a Pb²⁺ solution with an initial concentration of 10 mg/L, by a 5 g/L FucoPol solution. The overall metal removal decreased considerably (≤31.3 ± 1.6%) for higher Pb²⁺ concentrations (48 and 100 mg/L) probably due to the saturation of FucoPol’s binding sites. Pb²⁺ removal was also less efficient (66.0 ± 8.2%) when a higher FucoPol concentration (10 g/L) was tested. Pb²⁺ removal efficiency of FucoPol was maximized at pH 4.3, however, it was affected by lower pH values (2.5–3.3). Moreover, the FucoPol’s sorption performance was unaffected (overall metal removal: 91.6–93.9%) in the temperature range of 5–40 °C. These findings demonstrate FucoPol’s great potential for utilization as a biodegradable and safe biosorbent for treating waters and wastewaters contaminated with Pb²⁺.

Marine environments comprise almost three quarters of Earth’s surface, representing the largest ecosystem of our planet. The vast ecological and metabolic diversity found in marine microorganisms suggest that these marine resources have a huge potential as sources of novel commercially appealing biomolecules, such as exopolysaccharides (EPS). Six Alteromonas strains from different marine environments in French Polynesia atolls were selected for EPS extraction. All the EPS were heteropolysaccharides composed of different monomers, including neutral monosaccharides (glucose, galactose, and mannose, rhamnose and fucose), and uronic acids (glucuronic acid and galacturonic acid), which accounted for up to 45.5 mol% of the EPS compositions. Non-carbohydrate substituents, such as acetyl (0.5–2.1 wt%), pyruvyl (0.2–4.9 wt%), succinyl (1–1.8 wt%), and sulfate (1.98–3.43 wt%); and few peptides (1.72–6.77 wt%) were also detected. Thermal analysis demonstrated that the EPS had a degradation temperature above 260 °C, and high char yields (32–53%). Studies on EPS functional properties revealed that they produce viscous aqueous solutions with a shear thinning behavior and could form strong gels in two distinct ways: by the addition of Fe²⁺, or in the presence of Mg²⁺, Cu²⁺, or Ca²⁺ under alkaline conditions. Thus, these EPS could be versatile materials for different applications.

FucoPol, a fucose-rich polyanionic polysaccharide, was used for the first time for the preparation of hydrogel membranes (HMs) using Fe³⁺ as a crosslinking agent. This study evaluated the impact of Fe³⁺ and FucoPol concentrations on the HMs’ strength. The results show that, above 1.5 g/L, Fe³⁺ concentration had a limited influence on the HMs’ strength, and varying the FucoPol concentration had a more significant effect. Three different FucoPol concentrations (1.0, 1.75 and 2.5 wt.%) were combined with Fe³⁺ (1.5 g/L), resulting in HMs with a water content above 97 wt.% and an Fe³⁺ content up to 0.16 wt.%. HMs with lower FucoPol content exhibited a denser porous microstructure as the polymer concentration increased. Moreover, the low polymer content HM presented the highest swelling ratio (22.3 ± 1.8 g/g) and a lower hardness value (32.4 ± 5.8 kPa). However, improved mechanical properties (221.9 ± 10.2 kPa) along with a decrease in the swelling ratio (11.9 ± 1.6 g/g) were obtained for HMs with a higher polymer content. Furthermore, all HMs were non-cytotoxic and revealed anti-inflammatory activity. The incorporation of FucoPol as a structuring agent and bioactive ingredient in the development of HMs opens up new possibilities for its use in tissue engineering, drug delivery and wound care management.

In this study, the flocculation properties of FucoPol, a bacterial extracellular polysaccharide, were investigated. FucoPol is a high molecular weight polymer and negatively charged due to the presence of glucuronic acid and the acyl groups succinyl and pyruvyl. High flocculation rate values (>70%) were achieved with a low bioflocculant dosage of 1 mg/L, for pH values in the range 3–5 and temperature within 15–20°C. The bioflocculant was also shown to be stable after freezing/thawing and heating up to 100°C. Given the polymer’s anionic character, the size of flocs formed and their surface profile, bridging seems to be the main flocculation mechanism of FucoPol. This study demonstrated that FucoPol is a promising natural, biodegradable and biocompatible alternative to the currently used synthetic or inorganic hazardous products, with potential to be used as a novel flocculation agent in several applications, such as water treatment, food or mining. Further studies will involve evaluating the reduction of cation dosage on flocculation efficiency, as well as testing the applicability of FucoPol to flocculate different types of suspended solids, such as, for example, activated carbons, soil solids or yeast cells.