Mark Jankauski

Dr. Mark Jankauski

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 May 2020 in Bioinspiration & Biomimetics
Verified
Journal Article
Closed access
PDF file
MJMark Jankauski
Mark Jankauski
Insects with asynchronous flight muscles are believed to flap at the effective fundamental frequency of their thorax-wing system. Flapping in this manner leverages the natural elasticity of the thorax to reduce the energetic requirements of flight. However, to the best of our knowledge, the fundamental frequency of the insect wing-muscle-thorax system has not been measured. Here, we measure the linear frequency response function (FRF) of honeybee Apis mellifera thoraxes about their equilibrium state in order to determine their fundamental frequencies. FRFs relate the input force to output acceleration at the insect tergum and are acquired via a mechanical vibration shaker assembly. When compressed 50 micron, the thorax fundamental frequency averaged across all subjects was about 50% higher than reported wingbeat frequencies. We suspect that the measured fundamental frequencies are higher in the experiment than during flight due to boundary conditions and posthumous muscle stiffening. Next, we compress the thorax between 100 - 300 micron in 50 micron intervals to assess the sensitivity of the fundamental frequency to geometric modifications. For all specimens considered, the thorax fundamental frequency increased nearly monotonically with respect to level of compression. This implies that the thorax behaves as a nonlinear hardening spring when subject to large displacements, which we confirmed via static force-displacement testing. While there is little evidence that insects utilize this non-linearity during flight, the hardening characteristic may be emulated by small resonant-type flapping wing micro air vehicles to increase flapping frequency bandwidth. Overall, methods established through this work provide a foundation for further dynamical studies on insect thoraxes moving forward.

29 July 2019 in Bioinspiration & Biomimetics
Verified
Journal Article
Closed access
PDF file
HRHeidi E Reid
Heidi E Reid
RSRyan K Schwab
Ryan K Schwab
MMMiles Maxcer
Miles Maxcer
RPRobert K D Peterson
Robert K D Peterson
EJErick L Johnson
Erick L Johnson
MJMark Jankauski
Mark Jankauski
Flapping insect wings deform under aerodynamic as well as inertial-elastic forces. This deformation is thought to improve power economy and reduce the energetic costs of flight. However, many flapping wing models employ rigid body simplifications or demand excessive computational power, and are consequently unable to identify the influence of flexibility on flight energetics. Here, we derive a reduced-order model capable of estimating the driving torques and corresponding power of flapping, flexible insect wings. We validate this model by actuating a tobacco hornworm hawkmoth Manduca sexta (L.) forewing with a custom single-degree-of-freedom mechanical flapper. Our model predicts measured torques and instantaneous power with reasonable accuracy. Moreover, the flexible wing model predicts experimental trends that rigid body models cannot, which suggests compliance should not be neglected when considering flight dynamics at this scale. Next, we use our model to investigate flight energetics with realistic flapping kinematics. We find that when the natural frequency of the wing is roughly three times that of the flapping frequency, flexibility can reduce energy expenditures by almost 25% compared to a rigid wing if negative work is stored as potential energy and subsequently released to do positive work. The wing itself can store about 30% of the 1200 [Formula: see text]J of total energy required over a wingbeat. Peak potential energy storage occurs immediately before stroke reversal. We estimate that for a moth weighing 1.5-2.5 g, the peak instantaneous power required for flight is 75-125 W kg-1. However, these peak values are likely lower in natural insect flight, where the wing is able to exchange strain energy with the compliant thorax. Our findings highlight the importance of flexibility in flapping wing micro aerial vehicle design and suggest tuned flexibility can greatly improve vehicle efficiency.

9 March 2022 in Journal of The Royal Society Interface
Verified
Journal Article
Open access
MJMark Jankauski
Mark Jankauski
RFRiggs Ferguson
Riggs Ferguson
ARAvery Russell
Avery Russell
SBStephen Buchmann
Stephen Buchmann
An estimated 10% of flowering plant species conceal their pollen within tube-like anthers that dehisce through small apical pores (poricidal anthers). Bees extract pollen from poricidal anthers through a complex motor routine called floral buzzing, whereby the bee applies vibratory forces to the flower stamen by rapidly contracting its flight muscles. The resulting deformation depends on the stamen's natural frequencies and vibration mode shapes, yet for most poricidal species, these properties have not been sufficiently characterized. We performed experimental modal analysis on Solanum elaeagnifolium stamens to quantify their natural frequencies and vibration modes. Based on morphometric and dynamic measurements, we developed a finite-element model of the stamen to identify how variable material properties, geometry and bee weight could affect its dynamics. In general, stamen natural frequencies fell outside the reported floral buzzing range, and variations in stamen geometry and material properties were unlikely to bring natural frequencies within this range. However, inclusion of bee mass reduced natural frequencies to within the floral buzzing frequency range and gave rise to an axial-bending vibration mode. We hypothesize that floral buzzing bees exploit the large vibration amplification factor of this mode to increase anther deformation, which may facilitate pollen ejection.

1 January 2022 in Acta Biomaterialia
Verified
Journal Article
Closed access
CCCailin Casey
Cailin Casey
CYClaire Yager
Claire Yager
MJMark Jankauski
Mark Jankauski
CHChelsea M. Heveran
Chelsea M. Heveran

5 August 2022 in Scientific Reports
Verified
Journal Article
Open access
PDF file
MJMark Jankauski
Mark Jankauski
CCCailin Casey
Cailin Casey
CHChelsea Heveran
Chelsea Heveran
MBM. Kathryn Busby
M. Kathryn Busby
SBStephen Buchmann
Stephen Buchmann
Approximately 10% of flowering plant species conceal their pollen within tube-like poricidal anthers. Bees extract pollen from poricidal anthers via floral buzzing, a behavior during which they apply cyclic forces by biting the anther and rapidly contracting their flight muscles. The success of pollen extraction during floral buzzing relies on the direction and magnitude of the forces applied by the bees, yet these forces and forcing directions have not been previously quantified. In this work, we developed an experiment to simultaneously measure the directional forces and thorax kinematics produced by carpenter bees (Xylocopa californica) during defensive buzzing, a behavior regulated by similar physiological mechanisms as floral buzzing. We found that the buzzing frequencies averaged about 130 Hz and were highly variable within individuals. Force amplitudes were on average 170 mN, but at times reached nearly 500 mN. These forces were 30–80 times greater than the weight of the bees tested. The two largest forces occurred within a plane formed by the bees’ flight muscles. Force amplitudes were moderately correlated with thorax displacement, velocity and acceleration amplitudes but only weakly correlated with buzzing frequency. Linear models developed through this work provide a mechanism to estimate forces produced during non-flight behaviors based on thorax kinematic measurements in carpenter bees. Based on the buzzing frequencies, individual bee’s capacity to vary buzz frequency and predominant forcing directions, we hypothesize that carpenter bees leverage vibration amplification to increase the deformation of poricidal anthers, and hence the amount of pollen ejected.

21 November 2022 in Biomimetics
Verified
Journal Article
Open access
PDF file
BCBraden Cote
Braden Cote
SWSamuel Weston
Samuel Weston
MJMark Jankauski
Mark Jankauski
Small-scale flapping-wing micro air vehicles (FWMAVs) are an emerging robotic technology with many applications in areas including infrastructure monitoring and remote sensing. However, challenges such as inefficient energetics and decreased payload capacity preclude the useful implementation of FWMAVs. Insects serve as inspiration to FWMAV design owing to their energy efficiency, maneuverability, and capacity to hover. Still, the biomechanics of insects remain challenging to model, thereby limiting the translational design insights we can gather from their flight. In particular, it is not well-understood how wing flexibility impacts the energy requirements of flapping flight. In this work, we developed a simple model of an insect drive train consisting of a compliant thorax coupled to a flexible wing flapping with single-degree-of-freedom rotation in a fluid environment. We applied this model to quantify the energy required to actuate a flapping wing system with parameters based off a hawkmoth Manduca sexta. Despite its simplifications, the model predicts thorax displacement, wingtip deflection and peak aerodynamic force in proximity to what has been measured experimentally in flying moths. We found a flapping system with flexible wings requires 20% less energy than a flapping system with rigid wings while maintaining similar aerodynamic performance. Passive wing deformation increases the effective angle of rotation of the flexible wing, thereby reducing the maximum rotation angle at the base of the wing. We investigated the sensitivity of these results to parameter deviations and found that the energetic savings conferred by the flexible wing are robust over a wide range of parameters.